Intel G41 Express Chipset Manuel utilisateur

USER'S MANUAL

Intel G41 Express Chipset

Intel ICH7 Chipset

Based

M/B for LGA 775 Quad Core Ready

Intel Core Processor Family

No. G03-MI5G41SVMD3F

Rev: 10

Release date: May

，

2010

Trademark:

* Specifications and Information contained in this documentation are furnished for information use only, and are

subject to change at any time without notice, and should not be construed as a commitment by manufacturer.

Environmental Safety Instruction

zAvoid the dusty, humidity and temperature extremes. Do not place the product in any

area where it may become wet.

z0 to 40 centigrade is the suitable temperature. (The figure comes from the request of

the main chipset)

zGenerally speaking, dramatic changes in temperature may lead to contact malfunction

and crackles due to constant thermal expansion and contraction from the welding

spots’ that connect components and PCB. Computer should go through an adaptive

phase before it boots when it is moved from a cold environment to a warmer one to

avoid condensation phenomenon. These water drops attached on PCB or the surface

of the components can bring about phenomena as minor as computer instability

resulted from corrosion and oxidation from components and PCB or as major as short

circuit that can burn the components. Suggest starting the computer until the

temperature goes up.

zThe increasing temperature of the capacitor may decrease the life of computer. Using

the close case may decrease the life of other device because the higher temperature in

the inner of the case.

zAttention to the heat sink when you over-clocking. The higher temperature may

decrease the life of the device and burned the capacitor.

Environmental Protection Announcement

Do not dispose this electronic device into the trash while discarding. To minimize pollution

and ensure environment protection of mother earth, please recycle.

CHAPTER 1 INTRODUCTION OF INTEL G41 MOTHERBOARD SERIES

1-1 FEATURES OF MOTHERBOARD .............................................................................1

1-1.1 SPECIAL FEATURES OF MOTHERBOARD...............................................2

1-2 SPECIFICATION.........................................................................................................3

1-3 ITEM CHECKLIST.......................................................................................................3

1-4 LAYOUT DIAGRAM....................................................................................................4

CHAPTER 2 HARDWARE INSTALLATION

2-1 INSTALL LGA 775 SUPPORTED INTEL PROCESSOR...........................................5

2-2 INSTALL MEMORY ....................................................................................................5

2-3 EXPANSION CARDS..................................................................................................6

CHAPTER 3 CONNCTORS, HEADERS & JUMPERS SETTING

3-1 CONNECTORS ...........................................................................................................7

3-2 HEADERS ...................................................................................................................9

3-3 JUPPER SETTING......................................................................................................11

CHAPTER 4 USEFUL HELP

4-1 HOW TO UPDATE BIOS ............................................................................................13

4-2 TROUBLE SHOOTING...............................................................................................13

TABLE OF CONTENT

Chapter 1

Introduction of Intel G41 Motherboard Series

1-1 Features of motherboard

The Intel G41 chipset motherboard series are based on the latest Intel G41 Express

Chipset and Intel ICH7 Chipset technology which supports the innovative 65nm and

90nm Intel®Core 2 Quad, Intel®Core 2 Duo®(Code Name: Conroe) Processor，Intel®

Pentium®Dual Core Processor, Celeron®Dual Core Processor and Celeron®400

Processor with Intel®Hyper-Threading Technology and fully supports the future 45nm

processors. The motherboard is optimized to deliver innovative features and

professional desktop platform solution for those who demand the best experience of

personal computing.

The motherboard implements Intel G41 Express Chipset which supports Front Side

Bus 1333MHz of data transferring. The board supports dual-channel DDRIII 800

/DDRIII 1066MHz RAM Module expandable to 8GB. The motherboard is embedded

with ICH7 chipset of providing one parallel Ultra ATA 100 interface for two IDE drives,

also providing two serial ATA2 interface of 3Gb / s data transfer rate for two serial ATA

devices.

The G41 motherboard series offer one PCI-Express x16 graphics slot of 8Gbyte/sec

data transfer rate at each relative direction which gets 7 times of bandwidth more than

AGP 8X and up to 16Gbyte/sec peak concurrent bandwidth at full speed to guarantee

the ultimate GPU computing performance. One 32-bit PCI slot also enriches

connectivity for the I/O of peripherals. The motherboards are designed of tackling the

profuse multimedia requirements nowadays.

The motherboards provide 10/100 Ethernet LAN function by using the PCI-E megabit

LAN. The embedded Realtek ALC 662 chipset is fully compatible with Sound Blaster

Pro standards providing HD audio 6-CH CODEC offers you with the home cinema

quality and satisfying software compatibility.

Embedded USB controller as well as capability of expanding to 6 of USB 2.0

functional ports delivering 480Mb/s of rich connectivity, these motherboards meet the

demands of future USB peripherals which are also equipped with hardware monitor

function on system to monitor and protect your system and maintain your non-stop

business computing.

Some special features---CPU Thermal Throttling/ CPU Vcore 7-shift /CPU Vcore

Input/Output OC-CON )in this motherboard are designed for power user to use the

over-clocking function in more flexible ways. But please be caution that the

over-clocking maybe causes the fails in system reliabilities. This motherboard

provides the guaranteed performance and meets the demands of the next generation

computing. But if you insist to gain more system performance with variety possibilities

of the components you choose, please be careful and make sure to read the detailed

descriptions of these value added product features, please get them in the coming

section.

1-1.1 Special Features of Motherboard

CPU Thermal Throttling Technology---The CPU Overheat Protection

Technology

To prevent the increasing heat from damage of CPU or accidental shutdown while at

high workload, the CPU Thermal Throttling Technology will force CPU to enter

partially idle mode from 87.5% to 12.5% according to preset CPU operating

temperature in BIOS (from 40℃to 90℃). When the system senses the CPU

operating temperature reaching the preset value, the CPU operating bandwidth will be

decreased to the preset idle percentage to cool down the processor. When at

throttling mode the beeper sound can be optionally selected to indicate it is in working.

CPU Vcore 7-Shift---Shift to Higher Performance

The CPU voltage can be adjusted up by 7 steps for the precisely over-clocking of

extra demanding computing performance.

CPU Vcore Input/Output Solid Capacitors---High-polymer Solid Electrolysis

Aluminum Capacitors

The working temperature is from 55 degrees Centigrade below zero to 125 degrees

Centigrade, Solid capacitors possess superior physical characteristics that can be

while reducing the working temperature between 20 degrees Centigrade each time,

intact extension 10 times of effective product operation lives, at not rising degrees

Centigrade of working temperatures each time a relative one, life of product decline

10% only too.

1-2 Specification

Spec Description

Design zMicro ATX form factor; PCB size: 22.5*17.1cm

Chipset zIntel G41 Memory Controller Hub (MCH) Chipset

zIntel 82801GB I/O Controller Hub (ICH7) Chipset

CPU Socket

(LGA775 )

zSupports the innovative 65nm and 90nm Intel® Celeron®400, Intel®

Celeron® Dual Core, Pentium®Dual Core Processor, Intel®Core 2

Quad, Intel®Core 2 Duo®(Code Name: Conroe) Processor with

Intel®Hyper-Threading Technology and fully supports the future

45nm processors.

zSuggest the power of the CPU should below 65W

zSupport FSB Frequency 1333 / 1066 / 800/533 MHz

Memory Socket

z240-pin DDRIII RAM module socket x 2

zSupports two DDRIII 800 /DDRIII1066MHz RAM Module expandable

to 8GB

zSupport dual-channel function

Expansion Slots zPCI-Express x16 slot 1pcs.

z32-bit PCI slot 1pcs

Integrate IDE and

Serial ATA2

zOne PCI IDE controller that supports PCI Bus Mastering, ATA

PIO/DMA and the ULTRA DMA 33/66/100 functions that deliver the

data transfer rate up to 100 MB/s; two Serial ATA2 ports each

provides 3.0 Gb /sec data transfer rate.

Integrated VGA zIntegrated Graphic Media Accelerator 4500

LAN

zIntegrated PCI-E 10/100 LAN chip

zSupport Fast Ethernet LAN function of providing 10Mb / 100Mb

data transfer rate

HD Audio

zRealtek ALC662 Azalia 6-channel Audio Codec integrated

zAudio driver and utility included

BIOS zAMI 8MB DIP Flash ROM

Multi I/O

zPS/2 keyboard and PS/2 mouse connectors

zSerial port x1

zD-Sub 15-pin VGA Conn.

zUSB 2.0 connector x 4, headers x1

zRJ-45 LAN connector x1

zAudio connector x1 (Line-in, Line-out, MIC)

zHDMI-SPDIF header x1

zSATA Connector x2

1-3 Item Checklist

5Intel G41 Platform Processor Chipset based motherboard

5DVD for motherboard utilities

5SATA cable

5User’s manual

5Back panel

1-4 Layout Diagram

ATX 12V Power

Connector

Front Panel

Header

ATX Power

Connector

CPU Socket mPGA775

Intel 82801GB

ICH Chipset

Power Led &

Speaker Header

DDRIII

DIMMx2

ALC662

HD Audio Codec

32-bit PCI Slot

Serial Port

B／MS Power ON

Jumper (JP1)

USB Ports SYSFAN1

Front Panel

Audio Heade

Megabit LAN Chip

IDE Connector

Serial-ATA2

Connector (SATA1, 2)

CPU FAN

VGA Port

RJ-45 Ove

USB Ports

PCI Express x16 Slot

Intel G41Express

Chipset

USB Power ON Jumper (JP2)

PS2 KB/Mouse

Port

USB Header

HDMI-SPDIF Header

6-CH

Audio Connector

RJ45 LAN

PS/2 Mouse Port

PS/2 Keyboard Port

Line-IN

Line-OUT

MIC-IN

USB Ports

Serial Port VGA Port

Chapter 2

Hardware Installation

2-1 Install LGA 775 Supported Intel Processor

This motherboard provides a 775-pin surface mount, LGA775 Land Grid Array socket,

referred to as the LGA775 socket supports Intel Pentium Dual Core processor in the

775 Pin package utilizes Flip-Chip Land Grid Array (FC-LGA) package technology.

The CPU that comes with the motherboard should have a cooling FAN attached to

prevent overheating. If this is not the case, then purchase a correct cooling FAN

before you turn on your system.

WARNING! 1.Be sure that there is sufficient air circulation across the processor’s

heatsink and CPU cooling FAN is working correctly, otherwise it may

cause the processor and motherboard overheat and damage, you

may install an auxiliary cooling FAN, if necessary.

. Suggest the power of CPU should below 65w.

To install a CPU, first turn off your system and remove its cover. Locate the LGA775

socket and open it by first pulling the level sideways away from the socket then

upward to a 90-degree angle. Insert the CPU with the correct orientation as shown

below. The notched corner should point toward the end of the level. Because the CPU

has a corner pin for two of the four corners, the CPU will only fit in the orientation as

shown.

CPU LGA775 Socket

Colden Arrow

LGA775

2-2 Install Memory

The board provides two 240-pin DDRIII DUAL INLINE MEMORY MODULES (DIMM)

socket for DDRIII memory expansion to maximum memory volume of 8GB DDRIII

SDRAM.

Valid Memory Configuration

Bank 240-Pin DIMM PCS Total Memory

Bank 0, 1 (DIMM1) DDRIII 800/ DDRIII 1066 X1 4GB

Bank 2, 3 (DIMM2) DDRIII 800/ DDRIII 1066 X1 4GB

Total Memory (Max.4GB)

2 8GB

Recommend DIMM Module Combination

1. One DIMM Module ----Plug in DIMM1

2. Two DIMM Modules---Plug in DIMM1 and DIMM2 for Dual channel function

For Dual channel Limited!

1. Dual channel function only supports when 2 DIMM Modules plug in either both DIMM1

& DIMM2

2. DIMM1 & DIMM2 must be the same type, same size, and same frequency for dual

channel function.

Install memory modules to your motherboard is not difficult, you can refer to figure

below to see how to install a memory module.

NOTE! When you install DIMM module fully into the DIMM socket the eject

tab should be locked into the DIMM module very firmly and fit into its

indention on both sides.

2-3 Expansion Cards

The G41 motherboard series offer one PCI-Express x16 graphics slot of 8Gbyte/sec

data transfer rate at each relative direction which gets 7 times of bandwidth more than

AGP 8X and it’s up to a peak concurrent bandwidth of 16Gbyte/sec at full speed to

guarantee the ultimate GPU computing performance. One 32-bit PCI slot enriches the

rich connectivity for the I/O of peripherals. The motherboards are designed of tackling

the profuse multimedia requirements nowadays.

Chapter 3

Connectors, Headers & Jumpers Setting

3-1 Connectors

(1) Power Connector (24-pin block): ATXPWR

ATX Power Supply connector:

This is a new defined 24-pins

connector that usually comes

with ATX case. The ATX Power

Supply allows using soft power

on momentary switch that

connect from the front panel

switch to 2-pins Power On jumper

pole on the motherboard. When

the power switch on the back of

the ATX power supply turned on,

the full power will not come into

the system board until the front

panel switch is momentarily

pressed. Press this switch again will turn off the power to the system board.

** We recommend that you use an ATX 12V Specification 2.0-compliant power

supply unit (PSU) with a minimum of 350W power rating. This type has 24-pin

and 4-pin power plugs.

** If you intend to use a PSU with 20-pin and 4-pin power plugs, make sure that the

20-pin power plug can provide at least 15A on +12V and the power supply unit

has a minimum power rating of 350W. The system may become unstable or may

not boot up if the power is inadequate.

PE1 / PCI-E x16 Slot

32-bit PCI Slot

Pin 1

ROW1 ROW2

24-Pin

ROW1 ROW2

Pin 1

20-Pin

PIN ROW1 ROW2

1 3.3V 3.3V

2 3.3V -12V

3 GND GND

4 5V Soft Power On

5 GND GND

6 5V GND

7 GND GND

8 Power OK -5V

9 +5V (for Soft Logic) +5V

10 +12V +5V

11 +12V +5V

12 +3V GND

Autres manuels pour G41 Express Chipset

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Intel Carte mère

Intel

Intel DG41BI Manuel utilisateur

Intel

Intel SE7501HG2 Manuel utilisateur

Intel

Intel MAT-880 Manuel utilisateur

Intel

Intel H310 Manuel utilisateur

Intel

Intel D945GBO Manuel utilisateur

Intel

Intel DN2800MT Manuel utilisateur

Intel

Intel Desktop Board D850EMV2 Manuel utilisateur

Intel

Intel DQ963GS Manuel utilisateur

Intel

Intel BOXDG33TLM Guide de configuration

Intel

Intel PT-6IBD Manuel utilisateur

Intel

Intel Atom Pine Trail-D525 Manuel utilisateur

Intel

Intel DH87RL Guide de configuration rapide

Intel

Intel DG33FB - Desktop Board Classic Series... Manuel utilisateur

Intel

Intel I815E Manuel utilisateur

Intel

Intel BLKDH55PJ Manuel utilisateur

Intel

Intel D945GCLF - Desktop Board Essential Series... Manuel utilisateur

Intel

Intel D915GUX Manuel utilisateur

Intel

Intel DZ77GA-70K Manuel utilisateur

Intel

Intel D945GCNL - Desktop Board Motherboard Manuel utilisateur

Intel

Intel BOXDG41MJ Manuel utilisateur

Intel

Intel DB43LD Manuel utilisateur

Intel

Intel I925XE Manuel utilisateur

Intel

Intel DQ35MP Manuel utilisateur

Intel

Intel Desktop Board D850EMD2 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur