Intel AnyPoint Manuel utilisateur
Exhibit Q: User Manual 1400
FCC ID: EJM-X400
Share
Broadband
with
all your PCs
®
AnyPoint
Networking Gateway 1400
User’s Guide
Copyright
The Intel®Anypoint®Networking Gateway 1400 User’s Guide as well as the
software described in it, is furnished under license and may only be used or
copied in accordance with the terms of the license. The information in this
document is furnished for informational use only, is subject to change without
notice, and should not be construed as a commitment by Intel Corporation.
Intel Corporation assumes no responsibility or liability for any errors or
inaccuracies that may appear in this document or any software that may be
provided in association with this document.
Except as permitted by such license, no part of this document may be
reproduced, stored in a retrieval system, or transmitted in any form or by any
means without the express written consent of Intel Corporation.
Information in this document is provided in connection with Intel products. No
license, express or implied, by estoppel or otherwise, to any intellectual
property rights is granted by this document. Except as provided in Intel's
Terms and Conditions of Sale for such products, Intel assumes no liability
whatsoever, and Intel disclaims any express or implied warranty, relating to
sale and/or use of Intel products including liability or warranties relating to
fitness for a particular purpose, merchantability, or infringement of any patent,
copyright or other intellectual property right. Intel products are not intended for
use in medical, life saving, or life sustaining applications.
Intel may make changes to specifications and product descriptions at any
time, without notice.
Intel, AnyPoint, and Pentium are trademarks or registered trademarks of Intel
Corporation or its subsidiaries in the United States and other countries.
**Other names and brands may be claimed as the property of others.
Copyright (C) 2002, Intel Corporation. All rights reserved.
Intel Corporation, 5200 NE Elam Young Parkway, Hillsboro, OR 97214-6497
Product ID: FF70-1-ENU
Version 3.00.00 Rev 1.00 May, 2002
iii
Contents
Introduction .......................................................................1
Overview ............................................................................................................................2
Intel AnyPoint Networking Gateway 1400 Features .........................................................3
System Requirements .........................................................................................................3
Service Requirements .........................................................................................................4
A look at the Gateway Hardware .......................................................................................4
Items included with the Gateway .......................................................................................8
Finding Information ........................................................................................................... 9
Running the Internet Setup Wizard ....................................................................................9
Configuring your Cable Modem Settings .........................13
Specifying an IP address ..................................................................................................14
Specifying a name server .................................................................................................16
Setting up the Gateway with a Network ...........................19
Connecting the gateway to an Ethernet hub or switch .....................................................20
Connecting the gateway to a wireless network ................................................................22
Using the Wireless Network Configuration Wizard ........................................................25
Specifying a wireless network name (SSID) ....................................................................27
Correcting for wireless interference .................................................................................29
Changing or disabling encryption settings .......................................................................32
Specifying a wireless encryption key from text ...............................................................34
Entering a key manually ...................................................................................................36
Disabling wireless encryption ..........................................................................................39
Configuring the gateway’s firewall ..................................................................................41
Specifying the firewall security level ...............................................................................42
Specifying intrusion detection settings ............................................................................44
Specifying IP addresses to be excluded from being blocked ...........................................47
Using port forwarding ......................................................................................................49
Enabling port forwarding .................................................................................................51
Selecting a target computer by name ...............................................................................53
Selecting a target computer by IP address .......................................................................55
Creating a custom rule ......................................................................................................57
iv
Using Advanced Configuration Options .......................... 59
Accessing advanced configuration options ......................................................................60
Changing the gateway password ......................................................................................62
Specifying wireless security settings ................................................................................64
Resetting the gateway or reloading default settings .........................................................67
Exposing a computer outside the firewall ........................................................................69
Enabling remote access ....................................................................................................71
Specifying the Host and Domain names ..........................................................................73
Specifying LAN and DHCP settings ................................................................................75
Disabling Universal Plug and Play (UPnP) .....................................................................78
Diagnostics and Troubleshooting .....................................81
Getting network status information ..................................................................................82
Getting status details ........................................................................................................88
Running Diagnostics ........................................................................................................95
Problems and solutions ....................................................................................................96
If all else fails .................................................................................................................108
Reading the gateway indicator lights .............................................................................108
Reading settings and device status .................................................................................108
Glossary ......................................................................... 111
Glossary ..........................................................................................................................112
Regulatory Compliance Statements ............................... 119
Safety compliance statements ........................................................................................120
Emissions compliance statements ..................................................................................120
RF exposure compliance statements ..............................................................................121
Canadian compliance statements ...................................................................................121
European Union compliance statements ........................................................................121
Product Ecology Statements ..........................................................................................123
Copyright © 2002 Intel Corporation 1
Chapter 1
Introduction
This chapter provides a basic overview of the gateway’s
features, list its system and service requirements, lists
the items included with gateway product package,
explains where to find more information, and explains
how to start the Internet Setup Wizard.
■Intel AnyPoint Networking Gateway 1400 Features
■System Requirements
■Service Requirements
■A look at the Gateway Hardware
■Items included with the Gateway
■Finding Information
■Running the Internet Setup Wizard
2
Overview
The Intel®AnyPoint®Networking Gateway 1400 is an
advanced services gateway that combines the functions of a
Bridge, Router, and Switch in a single box for Internet access
and computer connectivity.
Using the gateway, you can share Internet access
seamlessly among all the computers on your network
whether you are using Ethernet or 802.11b Wireless adapters
or a combination of any of these technologies.
The Intel AnyPoint Networking Gateway 1400 connects
directly to a cable modem. Using the gateway and cable
modem together enables powerful Internet access on a home
or small-business network.
Data
Server
Laser Printer
PC
PC
Gateway Modem
Internet
Shared Drive
Data
Server
Laser Printer
PC
PC
Gateway Modem
Internet
Shared Drive
Chapter 1 – Introduction
Copyright © 2002 Intel Corporation 3
Intel AnyPoint Networking Gateway 1400 Features
The gateway has the following features:
• Easy to install
• Automatic first time use setup wizard
• Port forwarding
• UPnP support
• Automatic diagnostic tests
• Readily available troubleshooting tips
• Simple Web-based user interface
• Internet sharing on your network
• Built-in firewall for network security
System Requirements
To configure the gateway, your computer must meet
certain requirements. Choose the list appropriate to your
computer’s operating system:
Windows* • 166 MHz Pentiumprocessor, performance level or
better
• Windows* 95, 98, Me, 2000, XP, or NT*
• 32 MB of RAM, or more
• CD-ROM drive
• 800 x 600 resolution monitor (SVGA) or higher
• One of the following:
• 10/100 Ethernet or 10 baseT Ethernet adapter
• Wireless PC Card (802.11b/Wi-Fi)
• Web browser (Microsoft Internet Explorer* 5.0 or
later, Netscape Navigator* 4.75 or later, or
equivalent)
Macintosh* • PowerPC* or 680x0*
• Mac OS 7.6.1 or later
Chapter 1 – Introduction
Copyright © 2002 Intel Corporation
4
• 32 MB of RAM, or more
• 800 x 600 resolution monitor (SVGA) or higher
• One of the following:
• 10/100 Ethernet or 10 baseT Ethernet adapter
• Wireless PC Card (802.11b/Wi-Fi)
• CD-ROM drive
• Web browser (Microsoft Internet Explorer 5.0 or later;
Netscape Navigator 4.75 or later, or equivalent)
Linux • 166 MHz Pentium processor or higher
• 32MB of RAM, or more
• 800 x 600 resolution monitor (SVGA) or higher
• One of the following:
• 10/100 Ethernet or 10 baseT Ethernet adapter
• Wireless PC Card (802.11b/Wi-Fi)
• CD-ROM drive
• X-Windows* system
• Graphical Web browser (Netscape Navigator 4.75 or
later)
Service Requirements
Before you can use the gateway you must have a
Broadband account from your local service provider.
A look at the Gateway Hardware
Front Panel The Intel Gateway’s front panel has a series of eight
lights (plus a power on indicator) that provide information
about the gateway’s operational status.
AnyPoint™ Gateway
Ethernet
WirelessSecurityInternetSystem
Power 1234
Chapter 1 – Introduction
Copyright © 2002 Intel Corporation 5
Power Normally this light is on. If it is not on, check
that the power cable connectors are securely in
place.
System Green blinking - The gateway is operating
correctly.
Yellow blinking - The gateway is operating
correctly but has detected another DHCP
server connected to one of the four Ethernet
connectors. Disconnect each Ethernet cable,
one at a time, until the system returns to green
blinking. Change the PC you've identified as a
DHCP server to a DHCP client. (See the
Troubleshooting chapter for instructions.)
If this LED is not blinking, the system is not
operating correctly. See Chapter 5 for
troubleshooting information.
Table des matières
Autres manuels Intel Porte
Intel
Intel IXDPG425 Manuel utilisateur
Intel
Intel IoT Gateway Development KitDK200 Series Manuel utilisateur
Intel
Intel DK50 Series Manuel utilisateur
Intel
Intel Eurotech ReliaGATE 50-21 Manuel utilisateur
Intel
Intel DK100 Series Manuel utilisateur
Intel
Intel II Manuel utilisateur
Intel
Intel UTX-3115 Manuel utilisateur
Manuels Porte populaires d'autres marques
LST
LST M500RFE-AS Manuel utilisateur
Kinnex
Kinnex Media Gateway Manuel utilisateur
2N Telekomunikace
2N Telekomunikace 2N StarGate Manuel utilisateur
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur
Telsey
Telsey CPVA 500 - SIP Manuel utilisateur
