Intel NUC 12 Pro X Manuel utilisateur
1
NUC12DCM / NUC12EDB
User Guide –February 2022
Intel® NUC 12 Pro X Kit - NUC12DCMv9, NUC12DCMv7
Intel® NUC 12 Extreme Kit - NUC12DCMi9, NUC12DCMi7
Intel® NUC 12 Pro X Compute Element- NUC12EDBv9,
NUC12EDBv7
Intel® NUC 12 Extreme Compute Element- NUC12EDBi9,
NUC12EDBi7
User Guide
February 2022
2
NUC12DCM / NUC12EDB
User Guide –February 2022
You may not use or facilitate the use of this document in connection with any infringement or other legal analysis concerning Intel products
described herein. You agree to grant Intel a non-exclusive, royalty-free license to any patent claim thereafter drafted which includes subject matter
disclosed herein.
No license (express or implied, by estoppel or otherwise) to any intellectual property rights is granted by this document.
All information provided here is subject to change without notice. Contact your Intel representative to obtain the latest Intel product specifications
and roadmaps.
The products described may contain design defects or errors known as errata which may cause the product to deviate from published
specifications. Current characterized errata are available on request.
Copies of documents which have an order number and are referenced in this document may be obtained by calling 1-800-548-4725 or by visiting:
http://www.intel.com/design/literature.htm.
Intel technologies' features and benefits depend on system configuration and may require enabled hardware, software or service activation.
Performance varies depending on system configuration. No computer system can be absolutely secure.
Intel and the Intel logo are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2022, Intel Corporation. All rights reserved.
3
NUC12DCM / NUC12EDB
User Guide –February 2022
Contents
Revision History ..................................................................................................................... 4
1.0 Introduction................................................................................................... 5
1.1 Before You Begin ............................................................................................................5
1.2 Installation Precautions.............................................................................................. 6
1.3 Observe Safety and Regulatory Requirements.......................................... 6
2.0 Open the Chassis ........................................................................................ 7
3.0 System Memory .........................................................................................13
4.0 Change the M.2 SSD ................................................................................16
5.0 Close the Chassis ......................................................................................19
6.0 Connect Power ...........................................................................................27
7.0 Install an Operating System ..............................................................28
8.0 Install the Latest Device Drivers and Software......................29
4
NUC12DCM / NUC12EDB
User Guide –February 2022
Revision History
Date
Revision
Description
February 2022
1.0
Initial release.
5
NUC12DCM / NUC12EDB
User Guide –February 2022
1.0 Introduction
This User Guide provides step-by-step installation instructions for these products:
•Intel® NUC 12 Pro X Kit - NUC12DCMv9
•Intel® NUC 12 Pro X Kit - NUC12DCMv7
•Intel® NUC 12 Extreme Kit - NUC12DCMi9
•Intel® NUC 12 Extreme Kit - NUC12DCMi7
•Intel® NUC 12 Pro X Compute Element - NUC12EDBv9
•Intel® NUC 12 Pro X Compute Element - NUC12EDBv7
•Intel® NUC 12 Extreme Compute Element - NUC12EDBi9
•Intel® NUC 12 Extreme Compute Element - NUC12EDBi7
1.1 Before You Begin
CAUTIONS
The steps in this guide assume you’re familiar with computer terminology and with the
safety practices and regulatory compliance required for using and modifying
computer equipment.
Disconnect the computer from its power source and from any network before performing any
of the steps described in this guide.
Failure to disconnect power, telecommunications links, or networks before you open the
computer or perform any procedures can result in personal injury or equipment damage.
Some circuitry on the board can continue to operate even though the front panel power
button is off.
Follow these guidelines before you begin:
•Always follow the steps in each procedure in the correct order.
•Create a log to record information about your computer, such as model, serial
numbers, installed options, and configuration information.
•Electrostatic discharge (ESD) can damage components. Perform the procedures
described in this chapter only at an ESD workstation using an antistatic wrist strap
and a conductive foam pad. If such a station isn’t available, you can provide some
ESD protection by wearing an antistatic wrist strap and attaching it to a metal part of
the computer chassis.
6
NUC12DCM / NUC12EDB
User Guide –February 2022
1.2 Installation Precautions
When you install and test the Intel NUC, observe all warnings and cautions in the
installation instructions.
To avoid injury, be careful of:
•Sharp pins on connectors
•Sharp pins on circuit boards
•Rough edges and sharp corners on the chassis
•Hot components (such as SSDs, processors, voltage regulators, and heat sinks)
•Damage to wires that could cause a short circuit
Observe all warnings and cautions that instruct you to refer computer servicing to
qualified technical personnel.
1.3 Observe Safety and Regulatory Requirements
If you don’t follow these instructions, you increase your safety risk and the possibility of
noncompliance with regional laws and regulations.
7
NUC12DCM / NUC12EDB
User Guide –February 2022
2.0 Open the Chassis
1. Disconnect the attached power cords, telecommunications systems, networks, and modems, if
any of them are connected, before you open or service the device.
8
NUC12DCM / NUC12EDB
User Guide –February 2022
2. Unscrew the two top screws and two bottom screws (A) on the rear side of the chassis and
shift first the upper side (B) and then lower side (C) of the cover:
9
NUC12DCM / NUC12EDB
User Guide –February 2022
3. Remove the right-side panel (A) and left side panel (B) by sliding them back:
10
NUC12DCM / NUC12EDB
User Guide –February 2022
4. Lift the left side of the top lid
Ce manuel convient aux modèles suivants
11
Table des matières
Autres manuels Intel Ordinateur de bureau
Intel
Intel D34010WYK1 Guide de référence
Intel
Intel NUC8CY Guide de configuration rapide
Intel
Intel NUC 13 Pro Kit NUC13ANHv7 Manuel utilisateur
Intel
Intel STCK1A32WFC Manuel utilisateur
Intel
Intel NUC 13 Pro Desk Edition Manuel utilisateur
Intel
Intel S5520SC Guide de configuration
Intel
Intel NUC 8 Mainstream-G NUC8i7INH Manuel utilisateur
Intel
Intel NUC 8 Mainstream-G NUC8i5INH Guide de configuration
Intel
Intel NUC 12 Pro Kit NUC12WSHi3 Manuel utilisateur
Intel
Intel SRSH4 - Server Platform - 0 MB RAM Manuel utilisateur
Intel
Intel NUC 11 Performance Manuel utilisateur
Intel
Intel NUC7i3DNHNC Manuel utilisateur
Intel
Intel NUC8i7HN Guide de configuration
Intel
Intel NUC11PAKi7 Manuel utilisateur
Intel
Intel NUC7CJYH Manuel utilisateur
Intel
Intel NUC8i7HVKVAW Manuel utilisateur
Intel
Intel NUC5i3RYH Manuel utilisateur
Intel
Intel NUC 7 Manuel utilisateur
Intel
Intel Compute Stick STK1A32SC Manuel utilisateur
Intel
Intel SR1530AH - Server System - 0 MB RAM Manuel utilisateur
