Insys icom GPRS mini Manuel utilisateur

Manual

INSYS GPRS mini

Cellular Terminal

Any duplication of this manual is prohibited. All rights on this documentation and

the devices are with INSYS MICROELECTRONICS GmbH Regensburg.

Trademarks

The use of a trademark not shown below is not an indication that it is freely avail-

able for use.

MNP is a registered trademark of Microcom Inc.

IBM PC, AT, XT are registered trademarks of International Business Machine Cor-

poration.

INSYS®, e-Mobility LSG® and e-Mobility PLC® are registered trademarks of INSYS

MICROELECTRONICS GmbH.

Windows™ is a registered trademark of Microsoft Corporation.

Linux is a registered trademark of Linus Torvalds.

Publisher:

INSYS MICROELECTRONICS GmbH

Hermann-Köhl-Str. 22

D-93049Regensburg, Germany

Phone: +49 941 58692-0

Fax: +49 941 58692-45

E-mail: info@insys-icom.com

Internet: http://www.insys-icom.com

Date: Sep-11

Item: 31-22-15.001

Version: 1.0

Language: EN

Content

1Preface......................................................................................................6

1.1 Defects Liability Terms.............................................................................................6

1.2 Marking of Warnings and Notes...............................................................................7

1.2.1 Symbols and Key Words ............................................................................. 7

1.3 Symbols and the Formatting in this Manual ..............................................................8

2Safety .......................................................................................................9

2.1 Usage According to the Regulations .........................................................................9

2.2 Permissible Technical Limits ...................................................................................10

2.3 Responsibilities of the Operator .............................................................................10

2.4 Qualification of the Personnel ................................................................................10

2.5 Instructions for Transport and Storage....................................................................11

2.6 Markings on the Product........................................................................................11

2.7 Environmental Protection ......................................................................................12

2.8 Safety Instructions for Electrical Installation ...........................................................12

2.9 General Safety Instructions ....................................................................................12

3Mechanical Description............................................................................14

3.1 Overview ..............................................................................................................14

3.2 Physical Dimensions and Weight ............................................................................15

4Electrical Description ...............................................................................16

4.1 Power Connector...................................................................................................16

4.2 Antenna Connector ...............................................................................................18

4.3 SIM card reader .....................................................................................................18

4.4 RS232 Serial Port ...................................................................................................19

4.5 Serial Data ............................................................................................................19

4.6 Serial Data Signals.................................................................................................20

4.7 Control Signals – RTS, CTS, DTR, DSR, DCD, RI ..........................................................20

4.8 Mini USB Connector...............................................................................................21

5Operation ...............................................................................................22

5.1 Switching ON the modem ......................................................................................22

5.2 Switching OFF the modem .....................................................................................23

5.3 Operating states / LEDs..........................................................................................23

5.3.1 Power up LED (green LED in the middle) .................................................... 23

6Power consumption.................................................................................24

4Sep-11

Contents

Sep-11 5

7Safety and Product Care ...........................................................................25

7.1 Safety instructions ................................................................................................25

7.2 General precautions ..............................................................................................25

7.3 SIM card precautions .............................................................................................26

7.4 Antenna precautions .............................................................................................27

8Installation of the modem........................................................................28

8.1 Where to install the modem...................................................................................28

8.2 Environmental conditions ......................................................................................28

8.3 GSM Signal strength..............................................................................................28

8.3.1 Connections of components to INSYS GPRS mini........................................ 29

8.3.2 Network and Subscription ........................................................................ 29

8.4 How to install the modem......................................................................................29

8.4.1 Power supply ........................................................................................... 29

8.5 Securing the modem..............................................................................................29

8.6 Antenna................................................................................................................30

8.6.1 General.................................................................................................... 30

8.6.2 Antenna type ........................................................................................... 30

8.6.3 Antenna placement.................................................................................. 30

8.6.4 The antenna cable.................................................................................... 31

8.6.5 Possible communications disturbances ..................................................... 31

9Technical Data.........................................................................................32

10 INSYS icom Certified Accessories...............................................................34

11 Abbreviations..........................................................................................35

12 AT Command Reference ...........................................................................36

13 Maintenance, Repair and Troubleshooting ................................................37

13.1 Maintenance.........................................................................................................37

13.2 Troubleshooting....................................................................................................37

13.3 Repair...................................................................................................................37

14 Waste Disposal........................................................................................38

14.1 Repurchasing of Legacy Systems ............................................................................38

15 Declaration of Conformity........................................................................39

16 Export Regulation....................................................................................40

Preface INSYS GPRS mini

1Preface

This manual allows for the safe and efficient use of the product. The manual is part

of the product and must always be stored accessible for installation, commission-

ing and operating personnel.

1.1 Defects Liability Terms

A usage not according to the intended purpose, an ignorance of this documenta-

tion, the use of insufficiently qualified personnel as well as unauthorised modifica-

tions exclude the liability of the manufacturer for damages resulting from this. The

liability of the manufacturer ceases to exist.

The regulations of our Delivery and Purchasing Conditions are effective. These can

be found on our website (www.insys-icom.de/imprint/) under “General Terms and

Conditions“.

INSYS GPRS mini Preface

1.2 Marking of Warnings and Notes

1.2.1 Symbols and Key Words

Danger!

Risk of severe or fatal injury

One of these symbols in conjunction with the key word

Danger indicates an imminent danger. It will cause death or

severe injuries if not avoided.

Warning!

Personal injury

This symbol in conjunction with the key word Warning in-

dicates a possibly hazardous situation. It might cause death

or severe injuries if not avoided.

Caution!

Slight injury and / or material damage

This symbol in conjunction with the key word Caution indi-

cates a possibly hazardous or harmful situation. It might

cause slight or minor injuries or a damage of the product or

something in its vicinity if not avoided.

Note

Improvement of the application

This symbol in conjunction with the key word Note indi-

cates hints for the user or very useful information. This in-

formation helps with installation, set-up and operation of

the product to ensure a fault-free operation.

Preface INSYS GPRS mini

1.3 Symbols and the Formatting in this Manual

This section describes the definition, formatting and symbols used in this manual.

The various symbols are meant to help you read and find the information relevant

to you. The following text is structured like a typical operating instruction of this

manual.

Bold print: This will tell you what the following steps will result in

After that, there will be a detailed explanation why you could perform

the following steps to be able to reach the objective indicated first.

You can decide whether the section is relevant for you or not.

An arrow will indicate prerequisites which must be fulfilled to be able

to process the subsequent steps in a meaningful way. You will also

learn which software or which equipment you will need.

One individual action step: This tells you what you need to do at this

point. The steps are numbered for better orientation.

A result which you will receive after performing a step will be marked

with a check mark. At this point, you can check if the previous steps

were successful.

Additional information which you should consider are marked with a

circled "i". At this point, we will indicate possible error sources and tell

you how to avoid them.



Alternative results and steps are marked with an arrow. This will tell

you how to reach the same results performing different steps, or what

you could do if you didn't reach the expected results at this point.

INSYS GPRS mini Safety

2Safety

The Safety section provides an overview about the safety instructions, which must

be observed for the operation of the product.

The product is constructed according to the currently valid state-of-the-art technol-

ogy and reliable in operation. It has been checked and left the factory in flawless

condition concerning safety. In order to maintain this condition during the service

life, the instructions of the valid publications and certificates must be observed and

followed.

It is necessary to adhere to the general safety instructions must when operating the

product. The descriptions of processes and operation procedures are provided with

precise safety instructions in the respective sections in addition to the general

safety instructions.

Moreover, the local accident prevention regulations and general safety regulations

for the operating conditions of the device are effective.

An optimum protection of the personnel and the environment from hazards as well

as a safe and fault-free operation of the product is only possible if all safety instruc-

tions are observed.

2.1 Usage According to the Regulations

The product may only be used for the purposes specified in the function overview.

In addition, it may be used for the following purposes:

Data transmission functions in machines according to the machine di-

rective 2006/42/EC.

Usage as data transmission device for a PLC or a usual PC.

The product may not be used for the following purposes and used or operated un-

der the following conditions:

Controlling or switching of machines and systems, which do not

comply with the directive 2006/42/EC.

Usage, controlling, switching and data transmission of machines and

systems, which are operated in explosive atmospheres.

Controlling, switching and data transmission of machines, which may

involve risks to life and limb due to their functions or when a break-

down occurs.

Safety INSYS GPRS mini

2.2 Permissible Technical Limits

The product is only intended for the use within the permissible technical limits

specified in the data sheets.

The following permissible limits must be observed:

The ambient temperature limits must not be fallen below or ex-

ceeded.

The supply voltage range must not be fallen below or exceeded.

The maximum humidity must not be exceeded and condensate for-

mation must be prevented.

The maximum switching voltage and the maximum switching current

load must not be exceeded.

The maximum input voltage and the maximum input current must not

be exceeded.

2.3 Responsibilities of the Operator

As a matter of principle, the operator must observe the legal regulations, which are

valid in his country, concerning operation, functional test, repair and maintenance

of electrical devices.

2.4 Qualification of the Personnel

The installation, commissioning and maintenance of the product must only be per-

formed by trained expert personnel, which has been authorised by the plant opera-

tor. The expert personnel must have read and understood this documentation and

observe the instructions.

Electrical connection and commissioning must only be performed by a person, who

is able to work on electrical installations and identify and avoid possible hazards

independently, based on professional training, knowledge and experience as well

as knowledge of the relevant standards and regulations.

Table des matières

Autres manuels insys icom Terminal tactile

insys icom

insys icom GSM small 2.0 Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

Partner

Partner MF-2352 Manuel utilisateur

NCR

NCR RealPOS 7460-2 Manuel

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur

insys icom GPRS mini Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques