1
1Safety Instructions
1.1 Warnings
Please be advised to follow the instructions below for safety. Failure to do so could
result in potential dangers that may cause property loss, personal injury or death.
•The power supplies in the system may produce high voltages and energy hazards
that may cause personal injury. For your safety, please do not attempt to remove
the access panel to dissemble or replace any component on your own. Unless
informed by Inspur, only service technicians trained by Inspur are authorized to do
so.
•Please connect the equipment to an appropriate power supply. Use only the
external power supplies indicated on the rated input label to power the system. To
protect your equipment from damages caused by a momentary spike or plunge of
the voltage, please use voltage stabilizing equipment or uninterruptible power
supplies.
•If you must use an extension cable, please use a three-core cable with properly
grounded plugs. Check ratings of the extension cable to ensure that the total rating
of all equipment plugged into the extension cable does not exceed 80 percent of
the rated current limit for the extension cable.
•Please be sure to use the power supply components that come with the server, such
as power cords, power socket (if provided with the server) etc. For your safety and
safety of the equipment, please do not replace power cords or plugs randomly.
•To prevent electric shocks caused by leakage in the system, please make sure that
the power cables of the system and peripherals are correctly connected to the
earthed/grounded outlet. Please connect the three-core power plug to the
three-core AC power outlet that is well earthed and within reach. Be sure to use the
earthing/grounding pin of power cord and do not use the patch plug or the
earthing/grounding pin unplugged with cables. In the case that the
earthing/grounding conductors are not installed and it is uncertain whether there is
appropriate earthing/grounding protection, please do not use or attempt to
operate the equipment. You can contact and consult an electrician.
•Please do not push any objects into the openings of the system. Doing so may
cause short circuit of internal components and then lead to fire or electric shock.
•Please keep the system far away from the heatsink and heat sources, and be sure
not to block the air vents.
•Please be sure not to scatter food or spill liquid into the system or onto other
