Inspur NF3120M5 Manuel utilisateur

Warnings!

15kg

30kg

50kg

Please keep this document for future reference.

If the device is more than 15kg, at least 2 people are needed.

If the device is more than 30kg, at least 3 people are needed.

If the device is more than 50kg, at least 4 people are needed.

The cabinet, chassis or guide rails may cause serious scratches,

please be careful while handling.

When installing new servers into the cabinet in use, please be

aware of electric shock.

V01502B000000000

Rack-Mounted Server

Installation Guide

V1.0

● During the installation process, please do not block the vents on the server, especially the

vents on the front and rear of the server.

● Please remove the protective film from the server surface before using.

● Please leave a minimum of 15cm clearance on the front and rear sides of the server for

proper ventilation.

● Please install air baffles in place prior to device installation, to make sure that the server can

get enough air flow, and to avoid air turbulence in the server room.

● Servers are high-power electrical appliances, and they should be installed into dedicated

cabinets with vents or professional water-cooled cabinets, to prevent system failures

caused by overheating.

● If it needs to install more than one device, please load them from the bottom to the top,

and load the heaviest items first.

● Please note the cabinet’s load-bearing capacity, power supply capacity and heat

dissipation capacity, be sure not to install devices beyond the cabinet’s threshold capacity.

● For the convenience of using the front and rear ports of the server and cabling, leave a

minimum clearance of 70mm between the front end of the server and the inner side of the

cabinet’s front door, and 150mm between the rear end of the server and the inner side of

the cabinet’s rear door.

Pull the white tab forward and take out the inner rail.

Cauon: Do not over bend the spring plate to avoid damage.

Installing the rails

➊➋

→

Posion the rail on the rack. Fix the rear bracket ﬁrst, and lock the matching screws

and washers on the screw holes, then lock the screws on the front bracket. Install the

other rail in the same way.

Noce: Keep the front and rear brackets at the same height, and keep the two rails

on the same level.

Pull the middle rails fully extended in lock posion. Li the server, align the inner rails

with the middle rails, and push the server slowly unl it hits a stop.

Installing the server

Removing the rails

Pull down the covers of the le and right lugs, and ghten the screws within.

Pull or push the blue release tab, and push the server inward unl the inner rails fully enter

the middle rails. Press the two tabs on the middle rails while pushing the server into place.

➊

➌

Click

➋

➊

➋

Innerrail

Middlerail

Outerrail

white

Align the keyholes on the inner rail with the standoﬀs on the chassis, and push the rail

in the direcon of the arrow to install the inner rail onto the chassis.

FrontbracketRearbracket

blue

Remove the screws within the left and right lugs. Pull the server outwards

until the tabs on the middle rails are locked.

Pull the white tabs on the inner rails in the direction of the arrow, and

remove the server from the rack.

Slightly lift up the keyhole spring plates, and slide the inner rails forward to

remove the inner rails.

V1.0

Rack-Mounted Server Installation Guide

Autres manuels pour NF3120M5

Autres manuels Inspur Serveur

Inspur

Inspur Tiansuo TS860 Manuel utilisateur

Inspur

Inspur I48 Manuel utilisateur

Inspur

Inspur NF5280M5 Manuel utilisateur

Inspur

Inspur NF5486M5 Manuel utilisateur

Inspur

Inspur NE5260M5 Manuel utilisateur

Inspur

Inspur NF8380M5 Manuel utilisateur

Inspur

Inspur Yingxin NX 5440 Manuel utilisateur

Inspur

Inspur NF5270M3 Manuel utilisateur

Inspur

Inspur NF5280M6 Manuel utilisateur

Inspur

Inspur NF5266M5 Manuel utilisateur

Inspur

Inspur SA5112M4 Manuel utilisateur

Inspur

Inspur Yingxin NP3020M2 Manuel utilisateur

Inspur

Inspur NX5760M3 Manuel utilisateur

Inspur

Inspur NF5266M6 Manuel utilisateur

Inspur

Inspur NF5180M4 Manuel utilisateur

Inspur

Inspur Yingxin Manuel utilisateur

Inspur

Inspur NF5888M5 Manuel utilisateur

Inspur

Inspur NF5280M5 Manuel utilisateur

Inspur

Inspur NP5540M3 Manuel utilisateur

Inspur

Inspur NF5468M6 Manuel utilisateur

Inspur

Inspur 3408 Series Feuille d'instructions

Inspur

Inspur I48M6 Manuel utilisateur

Inspur

Inspur NF3120M5 Manuel utilisateur

Inspur

Inspur NX5460M4 Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur