Inspur NF5468M5 Manuel utilisateur

4U Rack-Mounted Server

Installation Guide

V1.0

15kg

30kg

50kg

Please keep this document for future reference.

Warnings!

●When installing 4U or bigger servers, at least 4 people are needed.

●During the installation process, please do not block the vents on the server, especially

the vents on the front and rear of the server.

●Please remove the protective film from the server surface before using.

●Please leave a minimum of 15cm clearance on the front and rear sides of the server

for proper ventilation.

●Please install air baffles in place prior to device installation, to make sure that the

server can get enough air flow, and to avoid air turbulence in the server room.

●Servers are high-power electrical appliances, and they should be installed into

dedicated cabinets with vents or professional water-cooled cabinets, to prevent

system failures caused by overheating.

●If it needs to install more than one device, please load them from the bottom to the

top, and load the heaviest items first.

●Please note the cabinet’s load-bearing capacity, power supply capacity and heat

dissipation capacity, be sure not to install devices beyond the cabinet’s threshold

capacity.

●For the convenience of using the front and rear ports of the server and cabling, leave

a minimum clearance of 70mm between the front end of the server and the inner side

of the cabinet’s front door, and 150mm between the rear end of the server and the

inner side of the cabinet’s rear door.

The cabinet, chassis or guide rails may cause serious

scratches, please be careful while handling.

When installing new servers into the cabinet in use, please be

aware of electric shock.

If the device is more than 15kg, at least 2 people are needed.

If the device is more than 30kg, at least 3 people are needed.

If the device is more than 50kg, at least 4 people are needed.

4U Rack-Mounted Server Installation Guide V1.0

Rail Kit Installation Guide

Chassis Installation Guide

Pull out the inner rail.

①Extend the inner rail. ②Press the latch, and remove the inner rail.

Install the inner rail to the server.

①② Install the inner rail to the server. ③Use a screw to fix it.

Install the server into the cabinet.

①② Align the inner rails with the middle rails, and push the server into the cabinet.

③Tighten the screws within the left and right handles of the server.

Repeat steps 1 and 2 to install the other inner rail to the server.

Identify the rail kit contents.

Rail Kit is assembled by inner rail, middle rail and outer rail.

Screw: M4×5.5 (2)

Install the rear side of the rail into the cabinet.

Position the rear bracket. ①Press the rear bracket. ②Push the rail into the

cabinet until the rear pins are fully seated on the post holes.

Install the front side of the rail into the cabinet.

Position the front bracket. Keep the front and rear brackets in the same 2U space.

①Press the front bracket. ②Push the rail into the cabinet until the front pins are

fully seated on the post holes.

Repeat steps 2 and 3 to install the other rail, and make sure that the left and right

rails are on the same level.

Rear bracket

Outer rail

Middle rail

Inner rail

Front bracket

This rail kit is suitable for 9.2 * 9.2mm, 9.5 * 9.5mm square-hole cabinets and

Ø7.1mm round-hole cabinets.

Autres manuels Inspur Serveur

Inspur

Inspur i24 Manuel utilisateur

Inspur

Inspur NF8380M5 Manuel utilisateur

Inspur

Inspur NF5888M5 Manuel utilisateur

Inspur

Inspur Tiansuo TS860 Manuel utilisateur

Inspur

Inspur Yingxin NF5280M2 Manuel utilisateur

Inspur

Inspur 3408 Series Feuille d'instructions

Inspur

Inspur Yingxin NP3020M2 Manuel utilisateur

Inspur

Inspur NF5488M5 Manuel utilisateur

Inspur

Inspur NF3120M5 Manuel utilisateur

Inspur

Inspur NX5760M3 Manuel utilisateur

Inspur

Inspur NF5466M5 Manuel utilisateur

Inspur

Inspur NF5486M5 Manuel utilisateur

Inspur

Inspur NF5270M3 Manuel utilisateur

Inspur

Inspur NF5260FM6 Manuel utilisateur

Inspur

Inspur NF3120M5 Manuel utilisateur

Inspur

Inspur NX8840 Manuel utilisateur

Inspur

Inspur NP3060 Manuel utilisateur

Inspur

Inspur NF5266M5 Manuel utilisateur

Inspur

Inspur NE5260M5 Manuel utilisateur

Inspur

Inspur NF3180A6 Manuel utilisateur

Inspur

Inspur NF8260M6 Manuel utilisateur

Inspur

Inspur NF8380M5 Manuel utilisateur

Inspur

Inspur NX5460M4 Manuel utilisateur

Inspur

Inspur NF8480M5 Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur