Insignia NS-RMT415 Manuel utilisateur

1
APPS
USER GUIDE
4-Device
Universal
Remote
NS-RMT415
Before using your new product, please read
these instructions to prevent any damage.

2
PACKAGE CONTENTS
• 4-Device Universal Remote
• User Guide
FEATURES
• Works with aTV, DVD or Blu-ray player, set-top
box, and streaming device
• Programming by popular brand names for
quick and easy setup
• Extensive code library for less common brands
and devices
• Premium design, materials, and construction
for rugged use
INSTALLING BATTERIES
• Insert two AA batteries (not included) into the
remote. Make sure that the + and – symbols
match the + and – symbols in the battery
compartment.
Note: To set up your remote, follow the setup steps
below, in order, and STOP as soon as your remote
works correctly.
PROGRAMMING YOUR REMOTE
There are three ways to set up your remote:
• Use“Setup method A: Popular brands”for
pre-set popular brands.
• Use“Setup method B: Direct code entry”if your
device’s direct code is located on the back page.
• Use“Setup method C: Code search”to perform
a code search for your device.
Note: This remote comes pre-set for Insignia TVs and DVD
players, DIRECTV set-top boxes, and AppleTV streaming.
If the remote control does not work with your device,
use method B or C to change the setup.
Setup method A: Popular brands
1Turn on your target device.
2Press and hold SETUP until your remote’s LED
blinks twice.
3Press the mode button for the type of device
you want to set up (TV, DVD, STB, STREAM).
The LED stays lit.

3
4Press digit 0- 3to select the device that you
wish to set up:
0 - STB/cable/streamer
1 -TV
2 - DVD/VCR
3 - Audio/receiver/sound bar
5Find your device type and brand in the tables
below, then press and hold its number until your
device turns o. Release the button when your
device turns o and the remote’s LED blinks twice.
Setup for that device is complete.
Note: If your brand does not appear in the table below,
use“Setup method B: Direct code entry”or“Setup
method C: Code search.”
# TV BLURAY/DVD
1Insignia Insignia
2LG LG
3Panasonic Panasonic
4Philips, Magnavox Philips, Magnavox
5Samsung Pioneer
6Sharp Samsung
7Sony Sharp
8TCL Sony
9Toshiba Toshiba
0VIZIO Yamaha
# SET-TOP BOX AUDIO
1AT&T Bose
2Bell Denon
3Comcast, Xnity LG
4Cox Communications Onkyo
5DIRECTV Panasonic
6DISH Network Philips
7Frontier Communications, Verizon Pioneer
8Rogers Samsung
9Shaw Sony
0Spectrum Yamaha

4
Setup method B: Direct code entry
1Turn on your target device.
2Press and hold SETUP until your remote’s LED
blinks twice.
3Press the mode button for the type of device
you want to set up (TV, DVD, STB, STREAM).
The LED stays lit.
4Enter the rst 5-digit code for your brand from
the code list (see“TV CODE LIST”on page 10).
5Press the (power) button to test your device.
If your device turns o and the remote’s LED
blinks twice, setup is complete.
6If the device does not turn o, repeat steps
2-5 using the next code for your brand or use
“Setup method C: Code search.”
Setup method C: Code search
1Turn on your target device.
2Press and hold SETUP until your remote’s LED
blinks twice.
3Press the mode button for the type of device
you want to set up (TV, DVD, STB, STREAM).
The LED stays lit.
4Press digit 0- 3to select the device that you
wish to set up:
0 - STB/cable/streamer
1 -TV
2 - DVD/VCR
3 - Audio/receiver/sound bar
5Press and hold OK until your device turns o.
Release the button when your device turns o
and the remote’s LED blinks twice. Setup for
that device is complete.
USING YOUR REMOTE
1Press the mode button (TV, DVD, STB,
STREAM) for the type of device you want to
control.
2Press the buttons applicable to that type of
device.

5
WATCH TV MODE
While watchingTV in STB and STREAM mode,
you can:
• Use your remote’s volume and input buttons to
control theTV. The rest of the buttons control the
device you’ve added to STB or STREAM mode.
• Press (power) once to turn your set-top box
on or o.
OR
• Press and hold (power) for two seconds to
turn both your set-top box and yourTV on or o.
To turn o watch TV mode:
1Press and hold SETUP until your remote’s LED
blinks twice.
2Press STB or STREAM twice.The LED blinks
four times.WatchTV mode is turned o and
your remote will not control yourTV.
To turn on watch TV mode after turning
it o:
1Press and hold SETUP until your remote’s LED
blinks twice.
2Press STB or STREAM twice.The LED blinks
twice.Watch TV mode is turned back on and
your remote controls yourTV again.
LOCKING AND UNLOCKING VOLUME
CONTROLS
To lock the volume of all four modes to one
device, turn o watchTV mode. See“WatchTV
mode”for instructions.
Locking volume controls to one device
1Press and hold SETUP until your remote’s LED
blinks twice.
2Press 9, 9, 3.
3Press the mode button for the type of device
you want to set up (TV, DVD, STB, STREAM).
The LED blinks twice to conrm.
Two blinks = Success
One long blink = Failure

6
Unlocking volume controls
1 Press the mode button (TV, DVD, STB,
STREAM) for the device you want to unlock the
volume for.
2Press and hold SETUP until your remote’s LED
blinks twice.
3Press 9, 9, 3, then press
Vol Down .
OR
To unlock the volume for all devices, press 9, 9,
3, then pressVolume Up [].
LOCKING AND UNLOCKING CHANNEL
CONTROLS
If you want to lock the channel of all four modes
to one device, deactivateWatchTV mode as
described above.
Locking channel controls to one device
1 Press and hold SETUP until your remote’s LED
blinks twice.
2Press 9, 7, 3, then press CH .
3Press the mode button for the type of device
you want to set up (TV, DVD, STB, STREAM).
The LED blinks twice to conrm.
Two blinks = Success
One long blink = Failure
Unlocking channel controls
1Press and hold SETUP until your remote’s LED
blinks twice.
2Press 9, 7, 3, then press CH -.
RESETTING REMOTE TO FACTORY
DEFAULTS
1Press and hold SETUP until your remote’s LED
blinks twice.
2Press 9, 7, 7.

7
REMOTE OVERVIEW
APPS

8
# ITEM DESCRIPTION
1LED Lights when buttons are pressed
2SET Programs the remote
3MENU Displays the main menu
4OK Conrms a selection
5 Navigate through menu items
6GUIDE Displays the program guide
7Control buttons Controls playback
8VOL + / - and
MUTE
Raises or lowers the volume
and mutes the sound
9Numbers Enter channel numbers
10 Delimiter (–) Enters a digital sub-channel
number (for example 4.1)
11 Home Opens the HOME menu
12 VOD Press to orderVideo-on-de-
mand or Pay-per-view
13 Input Selects INPUT/SOURCE to be
displayed (for example HDMI 1)
14 Power Turns devices on and o
15 TV, DVD, STB,
STREAM
Press to control aTV, DVD, set-
top box, or streaming device
16 INFO Displays info on the current
program
17 EXIT Exits the current menu
18 Red, green,
yellow, blue Shortcut keys in some menus
19 LIST Displays a LIST of currentTV
programs
20 Record Starts or stops recording
21 LAST Return to the last channel

9
TROUBLESHOOTING
PROBLEM SOLUTION
The LED does not
turn on when a key
is pressed.
•Replace the batteries.
•Make sure that your
batteries are installed
correctly. The + and -
symbols should match
the symbols inside the
battery compartment.
The LED turns on,
but the remote
does not control my
device.
•Make sure that your
remote is programmed
to your device.
•Make sure that your
remote is set to
the correct mode
(TELEVISION or TV/
DVD/STB/STREAM).
I have tried all of
the codes for my
device’s brand, but
none of them work.
•Use Setup Method C:
Code Search.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call
1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
# ITEM DESCRIPTION
22 CH + / - Changes the channel
23 ENTER Conrms selections
24 LIVE Return to liveTV after watching
a recording or streamed content
25 PAGE Scrolls up/down a page in menus
26 APPS Opens a smart device’s app menu
27 OPT Opens the options menu

10
BRAND CODES
Acer 14143
Advent 11570
Anity 13717, 13870, 13577, 13716
Aiwa 11362
Akai 11675, 11385
Akura 11687
AOC 11589, 13720, 11365, 12014, 12087, 13938
Apex Digital 12397, 14347, 14350
Ario 12397
Asus 13340
Atvio 13636
Atyme 12746
Audiosonic 11675
Audiovox 11564, 11276, 11769, 12121
Auria 14748, 12087, 12014, 12277
Avera 12397, 12049
Avol 14367, 13382, 13118
Axess 13593
Broksonic 11892
Calypso 14748
Champion 11362
Changhong 14629
Coby 13478, 13627, 12344, 13629
Commercial Solutions 11447
Conia 11687
Contex 14053
Craig 13423
Crosley 13115
Curtis 12855, 13577, 13121, 12466, 13895,
12352, 12397, 13939, 14035, 13636,
11326, 11314, 13154, 13382, 13717
Curtis Mathes 11661
Cytron 11326
Daewoo 11661, 13115, 10661
Digitrex 14207
TV CODE LIST
Autres manuels pour NS-RMT415
1
Table des matières
Autres manuels Insignia Télécommande universelle




















