Insignia NS-RMT2D18 Manuel utilisateur
Final flat size: 1.65 × 8.26 in. (42 × 210 mm)
USER GUIDE
2-Device
Universal
Remote
NS-RMT2D18
Before using your new product, please read
these instructions to prevent any damage.
PACKAGE CONTENTS
• 2-Device Universal Remote
• Quick Setup Guide
FEATURES
• Works with a TV and a set-top
box
• Programming by popular brand
names for quick and easy setup
• Extensive code library for less
common brands and devices
• Premium design, materials, and
construction for rugged use
INSTALLING BATTERIES
• Insert two AAA batteries (not
included) into the remote. Make
sure that the + and – symbols
match the + and – symbols in
the battery compartment.
Note:To set up your remote, follow the
setup steps below, in order, and STOP as
soon as your remote works correctly.
PROGRAMMING YOUR
REMOTE
There are three ways to set up your
remote:
• Use“Setup method A: Popular
brands”for pre-set popular brands.
• Use“Setup method B: Direct
code entry”if your device’s direct
code is located on the back page.
• Use“Setup method C: Code
search”to perform a code search
for your device.
Note:This remote comes pre-set for
InsigniaTVs and DIRECTV set-top boxes.
Setup method A: Popular
brands
1Turn on your target device.
2Press and hold SETUP until your
remote’s LED blinks twice.
3Press TELEVISION or
CABLE / SATELLITE /
STREAMING to select the mode
you want to set up.The LED stays
lit.
4Press either 0(for streaming/
cable/satellite) or 1(forTVs) to
select the device type you want
to set up.
5Find your device type and brand
in the table below, then press
and hold its number until your
device turns o. Release the
key when your device turns o.
Setup for that device is complete.
Note: If your brand does not appear in
the table below, use“Setup method B:
Direct code entry”or“Setup method C:
Code search.”
#TV
STREAMING /
CABLE /
SATELLITE
1Insignia AT&T
2LG Bell
3Panasonic Comcast, Xnity
4Philips,
Magnavox
Cox
Communications
5Samsung DIRECTV
6Sharp DISH Network
7Sony Frontier
Communications,
Verizon
8TCL Rogers
9Toshiba Shaw
0VIZIO Spectrum
Setup method B: Direct code
entry
1Turn on your target device.
2Press TELEVISION or
CABLE / SATELLITE /
STREAMING to select the mode
you want to set up.
3Press and hold SETUP until your
remote’s LED blinks twice.
4Enter the rst 5-digit code for
your brand from the code list
(seeTV CODE LIST on page 11).
5Press the (power) button to
test your device. If the device
turns o, setup is complete.
6If the device does not turn o,
repeat steps 2-5 using the next
code for your brand or use“Setup
method C: Code search.”
Setup method C: Code search
1Turn on your target device.
2Press and hold SETUP until your
remote’s LED blinks twice.
3Press TELEVISION or
CABLE / SATELLITE /
STREAMING to select the mode
you want to set up.
4Press either 0(for cable/satellite
streaming) or 1(forTVs) to select
the device type you want to set up.
5Press and hold OK until your
device turns o. Release the
key when your device turns o.
Setup for that device is complete.
USING YOUR REMOTE
1Press TELEVISION or
CABLE / SATELLITE /
STREAMING for the device you
want to control.
2Press the buttons applicable to
that type of device.
Watch TV mode
Note:To control a soundbar or other
audio device with your remote, see
Adding an audio device.
While watchingTV in
CABLE / SATELLITE / STREAMING
mode, you can:
• Use your remote’s volume and
input buttons to control the
TV.The rest of the buttons will
control the device you’ve added
to CABLE / SATELLITE /
STREAMING mode.
• Press (power) once to turn
your set-top box on or o.
OR
• Press and hold (power) for
two seconds to turn both your
set-top box and your TV on or o.
To turn o watch TV mode:
1Press and hold SETUP until your
remote’s LED blinks twice.
2Press CABLE /
SATELLITE / STREAMING twice.
The LED blinks four times.
WatchTV mode is turned o and
your remote will not control your
TV.
To turn on watch TV mode
after turning it o:
1Press and hold SETUP until your
remote’s LED blinks twice.
2Press CABLE /
SATELLITE / STREAMING twice.
The LED blinks twice.
WatchTV mode is turned back on
and your remote will control your
TV again.
ADDING AN AUDIO DEVICE
If you listen to sound through
a connected audio device (for
example, a soundbar or audio/
video receiver), you can program
your remote to control it when
in CABLE / SATELLITE /
STREAMING mode:
• Use“Method A: Popular audio
devices”if your audio device is
listed as a popular brand, or
• Use“Method B: Audio device
code entry”to perform a code
search for your device.
Method A: Popular audio
devices
IfWatchTV mode has been turned
o, it is possible to lock volume
controls to one device such as a TV.
To do this:
1Turn on your audio device and
play something through its
speakers.
2Press and hold SETUP until your
remote’s LED blinks twice.
3Press MUTE.
4Find your audio device’s brand
and corresponding number in
the table on the next page.
5While aiming the remote at
your audio device, press and
hold your audio device’s number
(from step 4) until the device
turns o. Setup is complete and
your remote controls your audio
device’s volume while using a
streaming, cable, or satellite
device.
# AUDIO # AUDIO
1Bose 6Philips
2Denon 7Pioneer
3LG 8Samsung
4Onkyo 9Sony
5Panasonic 0Yamaha
Method B: Audio device code
entry
1Turn on your audio device and
play something through its
speakers.
2Press and hold SETUP until your
remote’s LED blinks twice.
3Press MUTE.
4Find your audio device’s brand
in the code list (see AUDIO CODE
LIST on page 54), then use your
remote to enter the rst 4-digit
code for your brand from the
code list.
5Press MUTE to test your
audio device. If the sound
mutes, setup is complete and
your remote controls your audio
device’s volume while using a
streaming, cable, or satellite
device.
6If the sound doesn’t mute, repeat
steps 2-5 using the next code for
your brand.
Unlocking volume controls
1Press and hold SETUP until your
remote’s LED blinks twice.
2Press 9, 9, 3, then press VOL +.
LOCKING AND UNLOCKING
CHANNEL CONTROLS
The channel control lock lets you
lock channel controls (Channel Up
and Down, Digits, Enter, and Last)
to either aTV or a cable/satellite/
streaming device.
Locking channel controls to one
device
1 Press and hold SETUP until your
remote’s LED blinks twice.
2Press 9, 7, 3, then press CH +.
3Press TELEVISION or
CABLE / SATELLITE /
STREAMING to lock channel
controls to that device.The LED
blinks twice.
Unlocking channel controls
1Press and hold SETUP until your
remote’s LED blinks twice.
2Press 9, 7, 3, then press CH -.
RESETTING REMOTE TO
FACTORY DEFAULTS
1Press and hold SETUP until your
remote’s LED blinks twice.
2Press 9, 7, 7.
REMOTE OVERVIEW
# ITEM DESCRIPTION
1SETUP Programs the remote
2TELEVISION Press to control
yourTV
3APPS Opens a smart device’s
app menu
4Playback
controls
Control devices
connected to yourTV
5Home Opens the home
menu
6MENU Displays the main
menu
7OK Conrms a selection
8 Navigate through
menu items
9INFO Displays info on the
current program
10 LAST Return to the last
channel
11 VOL + / - Raises or lowers the
volume
12 MUTE Mutes the sound
13 Red, green,
yellow, blue
Shortcut keys in some
menus
14 Numbers Enter channel
numbers
15 Delimiter (–) Enters a digital
sub-channel number
(for example 4.1)
16 Power Turns devices on
and o
17 CABLE /
SATELLITE /
STREAMING
Press to control a
streaming/cable/
satellite device
18 VOD Press to order
Video-on-demand or
Pay-per-view
19 REC Starts or stops
recording
20 GUIDE Displays the program
guide
21 EXIT Exits the current
menu
22 CH + / - Changes the channel
23 INPUT Select input/source
to be displayed (for
example HDMI 1)
TROUBLESHOOTING
PROBLEM SOLUTION
The LED
does not
turn on
when a key
is pressed.
• Replace the
batteries.
• Make sure that
your batteries are
installed correctly.
The + and -
symbols should
match the symbols
inside the battery
compartment.
The LED
turns on,
but the
remote does
not control
my device.
• Make sure that
your remote is
programmed to
your device.
• Make sure that
your remote is set
to the correct mode
(TELEVISION
or CABLE /
SATELLITE /
STREAMING).
I have tried
all of the
codes for
my device’s
brand, but
none of
them work.
• Use Setup Method
C: Code Search.
ONEYEAR LIMITED
WARRANTY
Visit www.insigniaproducts.com
for details.
CONTACT INSIGNIA:
For customer service, call
1-877-467-4289 (U.S. and Canada)
or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
Table des matières
Autres manuels Insignia Télécommande universelle
