Inovance WL432 Series Instructions d'installation

WL432 Series IoT Module

Hardware Guide

SSuuzzhhoouu IInnoovvaannccee TTeecchhnnoollooggyy CCoo..,, LLttdd..

Address: No.16, Youxiang Road, Yuexi Town, Wuzhong District,

Suzhou 215104, P.R. China

Website: http://www.inovance.com

‑2‑

TTaabbllee ooff CCoonntteennttss

Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Ports............................................................... 5

Wireless Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installation Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Panel and Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Typical Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

‑1‑

Preface

■ Introduction

This series of 4G smart hardware products can collect local device data including

running status and faults and interwork with Inovance’s Internet of Things (IoT) server

using 4G, Wi‑Fi, or Ethernet to enable remote commissioning and maintenance

functions. Users can access the web server to monitor status and analyze faults of

local devices. Featuring security, reliability, wide application, and strong stability, this

series of products are widely used for elevators, air compressors, and cranes.

Before using the product, read this user guide carefully to fully understand the

features of the product and ensure safe use. This user guide mainly describes

specifications, installation dimensions, ports, performance parameters, wiring, and

typical applications of this series of products.

■ Acquisition

The information in this user guide is subject to change without notice. You can

acquire the latest document version from your product distributor or Inovance's

website

http://www.inovance.com

■ Purchase Information

No. Model Product Code Platform Standard Configuration

1 WL432‑DB 01100136 Elevator/Air

compressor platform

1. 4G antenna (1.5 m)

2. No SIM card

3. RS485 cable (1 m)

2 WL432‑DE 01100123 General‑purpose

Uweb platform

1. 4G antenna (1.5 m)

2. SIM card

3 WL432‑DK 01100124 General‑purpose

Uweb platform

1. 4G antenna (1.5 m)

2. SIM card

■ Options

No. Name Code Specifications

1Wi‑Fi

antenna 15310001 2.4G sucker antenna ‑ 1.5 m ‑ RG316 white cable ‑

internal thread female pin

‑2‑

Safety Instructions

●The user name and password are used for authentication of remote device

operations. Therefore, save them securely and take necessary measures to

prevent account stealing. If the user name and password are stolen, great

losses may be caused.

●Before performing remote device operations, contact on‑site engineers to

ensure safety situations. Otherwise, great losses may be caused.

●This series of products are used for industrial control with remote data

exchange based on network technologies. Inovance has taken necessary

technical measures to ensure data security. However, network risks (such as

hacking) that Inovance cannot control may still exist, and Inovance is not

responsible for losses caused by such network risks.

‑3‑

Product Information

■ Model number

①① PPrroodduucctt ttyyppee

WL: WAN LINE external

network

communication

Internet product

③③ CCoommmmuunniiccaattiioonn

pprroodduucctt ttyyppee

3: 430 series

⑤⑤ OOppeerraattoorr aanndd nneettwwoorrkk ttyyppee

D: 12–24 VDC power supply

②② NNeettwwoorrkk ttyyppee

4: 4G, IoT

④④ PPrroodduucctt ccaatteeggoorryy

2: Overseas version

⑥⑥ PPoowweerr ssuuppppllyy ttyyppee

B: Elevator/Air compressor product

E: Remote LAN

K: Remote serial port

V: High‑end version

■ Functional Advantage

Functional

Advantage Description Model

Supported

Serial port data

collection

Connected to local device controllers using the

RS485 or RS232 port, this product obtains data from

local device controllers and uploads the data to the

server using 3G, 4G, Ethernet, or Wi‑Fi, or transmits

control commands delivered by the server to the

local device controllers.

WL432–DK

WL432–DB

Network port

data collection

Connected to LAN where the target device locates

using the LAN port, this product obtains data from

multiple local target devices and uploads the data to

the server using 3G, 4G, Ethernet, or Wi‑Fi, or

transmits control commands delivered by the server

to local device controllers.

WL432–DE

‑4‑

Functional

Advantage Description Model

Supported

Remote safety

commissioning

Based on SSL VPN, the safety of remote

commissioning, upgrade, and maintenance of target

devices is ensured.

WL432–DE

WL432–DK

Power failure

reporting

When an external power supply failure occurs, the

product automatically reports the power supply

failure event to a specified server and saves the event

in the memory.

All models

Other

advantages

●Transparent or encrypted wireless data

transmission is supported.

●Fault alarms are available.

●Industrial terminals are adopted to meet industrial

field application requirements.

●Remote upgrade and maintenance are supported.

●Using a special DIN rail, this product is small in

volume, simplifying integration for users.

All models

Applicable

industry

General WL432–DE

WL432–DK

Elevator and air compressor industry WL432–DB

Monitoring data

collection mode

The data is collected through macro instructions. WL432–DB

The data is collected through development tookit on

the platform.

WL432–DE

WL432–DK

‑5‑

Ports

Figure ‑1 Port locations

‑6‑

Port Terminal Description

7‑pin socket

24V The voltage range of DC power ports is 12 V to 24 V.

24V and 0V indicate the positive pole and negative

pole of the power supply, respectively. The

maximum input current is 0.8 A.

485+ Standard RS485 serial

port

NNoottee::

●RS232 and RS485

cannot be used

together.

●For WL432‑DE, this

port is unavailable.

485‑ Standard RS485 serial

port

GND1

RS232 and RS485 share

the same reference

ground.

RXD

Standard RS232 serial

port for module data

receiving

TXD

Standard RS232 serial

port for module data

sending

4G antenna 4G Standard configuration, sucker antenna with

internal threads and inner male pin

Wi‑Fi antenna Wi‑Fi Optional, sucker antenna with internal threads and

inner female pin

SIM card slot /

Standard card dimension: 25 mm x 15 mm

Note: It is not recommended that users change SIM

cards. If users have such requirements, contact

Inovance’s technical engineers.

Reset key /

Short press (for 1s to 20s) to restore Wi‑Fi

parameters.

Long press (for over 20s) to restore factory settings.

Ethernet

WAN This port is used to connect external networks. 10 M

and 100 M networks are supported.

LAN This port is used to connect local devices. 10 M and

100 M networks are supported.

‑7‑

Port Terminal Description

LED indicators

Cloud service state indicator (green)

Data communication indicator (green)

Fault indicator (red)

4G or Wi‑Fi signal strength indicator (green)

The specific states indicated by the LED indicators are described as follows.

Steady Off Steady On Blinking

Cloud service

state indicator No network

●Device online

●Starting (within 33s)

●Button restoring

triggered

IP obtained, connecting

to the server

Data

communication

indicator No data

transceiving

●WL432‑DE/WL432‑DK: Blinking indicates normal

communication. The higher the communication

rate is, the quicker the blinking is.

●WL432‑DB: Steady on indicates normal

communication. Slow blinking indicates that a

password is used for the controller.

Fault indicator

Normal

●Starting (within 33s)

●Button restoring

triggered

●Disconnected from the

target device

●Network registering

●Poor 4G signal

Signal intensity

indicator

One bar: poor signal

Two bars: fair signal

Three bars: good signal

All off: no available signal, no network connection, or poor network

‑8‑

Wireless Indicators

Table –1 Wireless Indicators

Category Parameter Specifications

2.4G

WIFI

RF output power

(ERP/EIRP)

13–17 dBm

Frequency band

(MHz)

2412–2472 (center frequency)

Modulation DSSS, OFDM

GSM

RF output power

(ERP/EIRP)

GSM900: 33 dBm ± 2 dB

GSM1800: 30 dBm ± 2 dB

Frequency band

(MHz)

EGSM900: 880–915 MHz (TX), 925–960 MHz (RX)

DCS1800: 1710–1785 MHz (TX), 1805–1880 MHz (RX)

Modulation GMSK for GSM/GPRS, GMSK and 8PSK for EDGE

WCDMA

RF output power

(ERP/EIRP)

WCDMA: 24 dBm + 1/‑3 dB

Frequency band

(MHz)

WCDMA Band I: 1920‑1980 MHz (TX), 2110‑2170 MHz (RX)

WCDMA Band VIII: 880–915 MHz (TX), 925–960 MHz (RX)

Modulation WCDMA: QPSK

HSDPA: QPSK/16QAM

HSUPA: BPSK

LTE

RF output power

(ERP/EIRP)

LTE FDD: 23 dBm ± 2 dB

LTE TDD: 23 dBm ± 2 dB

Frequency band

(MHz)

FDD LTE Band 1: 1920‑1980 MHz (TX), 2110‑2170 MHz (RX)

FDD LTE Band 3: 1710‑1785 MHz (TX), 1805‑1880 MHz (RX)

FDD LTE Band 7: 2500‑2570 MHz (TX), 2620‑2690 MHz (RX)

FDD LTE Band 8: 880–915 MHz (TX), 925–960 MHz (RX)

FDD LTE Band 20: 832‑862 MHz (TX), 791‑821 MHz (RX)

FDD LTE Band 28: 703‑748 MHz (TX), 758‑803 MHz (RX)

FDD LTE Band 38: 2570‑2620 MHz (TX), 2570‑2620 MHz (RX)

FDD LTE Band 40: 2300‑2400 MHz (TX), 2300‑2400 MHz (RX)

Modulation QPSK/16QAM

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Inovance Unité de contrôle

Inovance

Inovance GL20-0800END Manuel utilisateur

Inovance

Inovance GL20-0016ETN Manuel utilisateur

Inovance

Inovance GL20-4AD Manuel utilisateur

Inovance

Inovance GL10-PS2 Manuel utilisateur

Inovance

Inovance AM600-RTU-ECT Manuel utilisateur

Inovance

Inovance GR10-2PHE Manuel utilisateur

Inovance

Inovance GL10-0032ETN Manuel utilisateur

Inovance

Inovance GR10-EC-6SW Manuel utilisateur

Inovance

Inovance GL20-RTU-ECT Manuel utilisateur

Inovance

Inovance PA 8000 LW Manuel utilisateur

Inovance

Inovance IMC30-6G Series Manuel utilisateur

Inovance

Inovance AM600-4PT Manuel utilisateur

Inovance

Inovance GL10-2PH Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur