InFocus Learn Big IN3102 Manuel utilisateur
IN3102 IN3104 IN3106 IN3108
010-0710-03
Regulatory models W3220, W3240 and W3260
1
Declaration of Conformity
Manufacturer: InFocus Corporation, 13190 SW 68th Parkway, Portland,
Oregon 97223-8368 USA
We declare under our sole responsibility that this projector conform to the
following directives and norms:
EMC Directive 2004/108/EC
EMC: EN 55022
EN 55024
EN 61000-3-2
EN 61000-3-3
Low Voltage Directive 2006/95/EC
Safety: IEC 60950-1: 1st Edition
Trademarks
DisplayLink is a trademark of DisplayLink Corporation.
Apple, Macintosh, and PowerBook are trademarks or registered trademarks
of Apple Computer, Inc. IBM is a trademark or registered trademark of
International Business Machines, Inc. Microsoft, PowerPoint, and Windows
are trademarks or registered trademarks of Microsoft Corporation. Adobe
and Acrobat are trademarks or registered trademarks of Adobe Systems
Incorporated. DLP® and the DLP logo are registered trademarks of Texas
Instruments and BrilliantColor™ is a trademark of Texas Instruments.
InFocus, In Focus, and INFOCUS (stylized) are either registered trademarks
or trademarks of InFocus Corporation in the United States and other
countries.
FCC Warning
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by InFocus Corporation may void
authority to operate the equipment.
Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Agency Approvals
UL, cUL
Other specific Country Approvals may apply. Please see product
certification label.
This document applies to regulatory models W3220, W3240, and W3260.
Input ratings: 3.3 - 1.2A (W3220, W3260), 3.9 - 1.4A (W3240)
InFocus reserves the right to alter product offerings and specifications at
any time without notice.
2
Table of Contents
Introduction 3
Positioning the projector 5
Projector and device connector guide 6
Connecting a computer source 9
Required computer connections
(DisplayLink or VESA) 9
Optional computer connections 9
Displaying an image 10
Adjusting the image 11
Connecting a video device 12
Video device connections 13
Composite video connection 13
HDMI 1.3 connection 13
S-video connection 13
VESA connection 13
Component video connection 13
Shutting down the projector 14
Troubleshooting your setup 14
Using the remote control 22
Using the audio 23
Using the keypad buttons 24
Optimizing computer images 25
Presentation features 25
Optimizing video images 26
Customizing the projector 26
Using the menus 27
Basic Picture menu 28
Advanced Picture menu 29
Setup menu 30
Status and Service menu 32
Maintenance 33
Cleaning the lens 33
Using the security lock 33
Replacing the projection lamp 34
Important Operating Considerations for Safety
• Place the projector in a horizontal position no greater than 15 degrees
off axis.
• Locate the projector in a well-ventilated area without any obstructions
to intake or exhaust vents. Do not place the projector on a tablecloth or
other soft covering that may block the vents.
• Locate the projector at least 4' (1.2 m) away from any heating or cooling
vents.
• Use only InFocus-approved ceiling mounts. Warning: To prevent eye
injury if the projector is ceiling mounted, wear protective eyewear
before opening lamp door. A warning sticker is included with the user
documentation. Place this sticker on the lamp door if the projector is
mounted on the ceiling.
• Only genuine InFocus lamps are tested for use in this projector.
InFocus is not liable for the performance, safety or certification of any
other lamps. The use of other lamps violates the projector warranty and
voids all certification marks on this projector.
• Use only the power cord provided. A surge-protected power strip is
recommended.
• Refer to this guide for proper startup and shutdown procedures.
• Hg – Lamp contains mercury. Manage in accordance with local
disposal laws. See www.lamprecycle.org.
• In the unlikely event of a lamp rupture, particles may exit through the
projector side vents. When the projector is turned on, keep people,
food, and drinks out of the "keep out" area under and around the
projector, as indicated by the "X" areas below.
Follow these instructions to help ensure image quality and lamp life over
the life of the projector. Failure to follow these instructions may affect the
warranty. For complete details of the warranty, see the Warranty Booklet.
5’/1.5m
8’/2.4m
3’/1m
2’/0.6m
3
Introduction
Your new digital projector is simple to connect, easy to use, and
straightforward to maintain. It is a versatile projector that is flexible enough
for business presentations and home video viewing too. The IN3102/
IN3104 has native XGA 1024x768 resolution, and the IN3106/IN3108 has
WXGA 1280x800 resolution. This guide applies to all products. They are
compatible with a wide variety of computers and video devices.
Product specifications
To read the latest specifications on your multimedia projector, be sure to
visit our website at www.infocus.com, as specifications are subject to change.
Accessories
The standard accessories that came with your projector are listed in the
included Quick Start Poster/Booklet. Optional accessories can be found on
our website at www.infocus.com or at your retailer or dealer.
Online registration
Register your projector on our website at www.infocus.com/register to
activate your warranty and receive product updates, announcements, and
registration incentives.
zoom (rear ring)
focus (front ring)
touch keypad
elevator foot
lens
remote control
receiver (IR)
elevator foot connector
panel
remote control
receiver (IR)
power cord
connector
4
Connector panel
The projector provides both computer and video connection options,
including:
•VESAcomputer(2)
• HDMI, for computer (1) and for video (1)
•S-video
•Compositevideo
• Separate audio inputs for video and computer
• USB DisplayLink connector, for computer audio/video input. This
USB connection also provides slide advance (and mouse control when
used with an optional remote control only)
The projector also provides the following connectors:
• Monitor out, to provide an image on your desktop computer as well as
on the projection screen
• Audio out, to provide sound for external speakers
• A 5 volt DC output (see below)
It also has an RS-232 connector for serial control. The Command Line
Interface (CLI) specifications and commands are on our website.
NOTE: DisplayLink video and audio is not sent to monitor out and audio
out.
5 volt DC output
The 3.5mm mini-jack triggers provide a 5 volt, 2 amp DC output. It provides
a constant output while the projector is on. It is designed to provide power
for an InFocus LiteShow II wireless device, which allows wireless
projection. More information can be found on our website at
www.infocus.com or at your retailer or dealer.
audio in
DisplayLink
connector
security lock RS-232
5 volt output
audio out
S-video
computer
composite
video HDMI for video
monitor out
5
Positioning the projector
To determine where to position the projector, consider the size and shape of
your screen, the location of your power outlets, and the distance between the
projector and the rest of your equipment. Here are some general guidelines:
• Position the projector on a flat surface at a right angle to the screen. The
projector must be at least 4.9 feet (1.5m) from the projection screen.
• Position the projector within 10 feet (3m) of your power source and
within 6 feet (1.8m) of your video device (unless you purchase
extension cables). To ensure adequate cable access, do not place the
projector within 6 inches (.15m) of a wall or other object.
• If you are installing the projector on the ceiling, refer to the installation
guide that comes with the Ceiling Mount Kit for more information. To
turn the image upside down, see “Ceiling mount” on page 31. We
recommend using an InFocus authorized ceiling mount.
• Position the projector the desired distance from the screen. The
distance from the lens of the projector to the screen, the zoom setting,
and the video format determine the size of the projected image.
• The image exits the projector at a given angle. IN3102/IN3104 image
offset is 115%; IN3106/IN3108 image offset is 112.4%. This means if
you have an image 10’ high, the bottom of the image will be 1.5'
(IN3102/IN3104) and 1.24' (IN3106/IN3108) above the center of the
lens.
Table 1: (IN3102 & IN3104)
Range of distance to the screen for a given screen size
Diagonal Screen
Size (inches/m)
Distance to screen
Maximum
distance (feet/m)
Minimum
Distance (feet/
m)
60/1.5 8.6/2.6 7.8/2.4
80/2.0 11.5/3.5 10.4/3.2
90/2.3 12.9/3.9 11.7/3.6
150/3.8 21.5/6.6 19.5/5.9
Table 2: (IN3106 & IN3108)
Range of distance to the screen for a given screen size
Diagonal Screen
Size (inches/m)
Distance to screen
Maximum
distance (feet/m)
Minimum
Distance (feet/
m)
60/1.5 7.3/2.2 6.5/2.0
(IN3102 & IN3104)
(IN3106 & IN3108)
10 ft high
image
10 ft high
image
bottom of image
1.24 ft above center
of lens
Projection angle
lens center
bottom of image
1.5 ft above center
of lens
Projection angle
lens center
6
80/2.0 9.7/2.9 8.7/2.7
90/2.3 10.9/3.3 9.8/3.0
150/3.8 18.1/5.5 16.3/5.0
Table 2: (IN3106 & IN3108)
Range of distance to the screen for a given screen size
Diagonal Screen
Size (inches/m)
Distance to screen
Maximum
distance (feet/m)
Minimum
Distance (feet/
m)
7
Projector and device connector guide
The following illustration and table should help you find the connectors to use and obtain the best resolution possible from your input devices, such as
computers, standard VCRs, DVD players (progressive and interlaced), HDTV sources (1080i, 1080p and 720p HDTV formats), TV and satellite tuners,
camcorders, video games (progressive and interlaced), and laser disc players.
audio in
DisplayLink
connector
security lock RS-232
5 volt output
audio out
S-video
computer
HDMI for video
composite
video monitor out
8
Video Device Video Compatibility If Your Device
Connector Is
Attach to Adapter or
Labeled Connector
on Projector
For Setup Instructions, see Comments
Standard Broadcast TV (not
HDTV) via: cable, digital cable,
satellite TV, DVD, or VCR
NTSC, PAL, and
SECAM formats
Composite video
or S-video
Video 3
or Video 2
Composite video connection on
page 14.
S-video connection on page 14
Not for progressive
(i.e. HDTV) sources.
See page 9.
Standard Video Camera
NTSC, PAL, and
SECAM formats
Composite video
or S-video
Video 3
or Video 2
Composite video connection on
page 14.
S-video connection on page 14
Not for progressive
(i.e. HDTV) sources.
See page 9.
Standard Video Game
NTSC, PAL, and
SECAM formats
Composite video
or S-video
Video 3
or Video 2
Composite video connection on
page 14.
S-video connection on page 14
Not for progressive
(i.e. HDTV) sources.
See page 9.
9
HDTV
(High Definition TV)
1080i, 1080p, 720p
Component 480i
VGA
Component video
Computer 3 or
Computer 2
Computer 3 or
Computer 2 via
optional VESA to
Component adapter
HDMI
VESA connection on page 14
Component video connection on
page 14
HDMI connection on page 14
Progressive DVD
1080i, 1080p, 720p
Component 480p
and 480i
VGA
Component video
Computer 3 or
Computer 2
Computer 3 or
Computer 2 via
optional VESA to
Component adapter
HDMI
VESA connection on page 14
Component video connection on
page 14
HDMI connection on page 14
Progressive Video Game
1080i, 1080p, 720p
Component 480p
and 480i
VGA
Component video
Computer 3 or
Computer 2
Computer 3 or
Computer 2 via
optional VESA to
Component adapter
HDMI
VESA connection on page 14
Component video connection on
page 14
HDMI connection on page 14
Video Device Video Compatibility If Your Device
Connector Is
Attach to Adapter or
Labeled Connector
on Projector
For Setup Instructions, see Comments
Autres manuels pour Learn Big IN3102
2
Ce manuel convient aux modèles suivants
6
Table des matières
Autres manuels InFocus Projecteur
InFocus
InFocus IN3118HD Manuel utilisateur
InFocus
InFocus IN5542 Manuel utilisateur
InFocus
InFocus ScreenPlay 4805 Mode d’emploi
InFocus
InFocus IN5534 Manuel utilisateur
InFocus
InFocus Work Big IN35 Manuel utilisateur
InFocus
InFocus Work Big IN1100 Manuel utilisateur
InFocus
InFocus IN5314 Manuel utilisateur
InFocus
InFocus LP630 Manuel utilisateur
InFocus
InFocus X16 Manuel utilisateur
InFocus
InFocus IN5302 Manuel utilisateur
InFocus
InFocus ScreenPlay 4800 Manuel utilisateur
InFocus
InFocus ScreenPlay 8602 Manuel utilisateur
InFocus
InFocus LP 420 Manuel utilisateur
InFocus
InFocus LP630 Instructions d'installation
InFocus
InFocus Quantum Laser Core Series Manuel utilisateur
InFocus
InFocus SP7205 Manuel utilisateur
InFocus
InFocus X16 Manuel utilisateur
InFocus
InFocus INL3149WU Manuel utilisateur
InFocus
InFocus LP 740 LiteMount Manuel utilisateur
InFocus
InFocus P111 Manuel utilisateur
Manuels Projecteur populaires d'autres marques
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur
NEC
NEC NP600S EDU Manuel utilisateur
BenQ
BenQ SH753P Manuel utilisateur
Eiki
Eiki EK-623U series Manuel utilisateur
Epson
Epson PowerLite Pro Cinema 6020UB Manuel utilisateur
Epson
Epson PowerLite Home Cinema 705HD Manuel utilisateur
