Infinity NF4 SLI Manuel utilisateur
935-CK804A-000
87100523
System Board User’s Manual
Carte Mère Manuel Pour Utilisateur
System-Platine Benutzerhandbuch
Manual del Usuario de Placas Base
Ðóêîâîäñòâî ÏîëüçîâàòåëÿÐóêîâîäñòâî Ïîëüçîâàòåëÿ
Ðóêîâîäñòâî ÏîëüçîâàòåëÿÐóêîâîäñòâî Ïîëüçîâàòåëÿ
Ðóêîâîäñòâî Ïîëüçîâàòåëÿ
2
Quick Setup Guide
1
Quick Setup
Guide
Copyright
This publication contains information that is protected by copyright. No part of it
may be reproduced in any form or by any means or used to make any
transformation/adaptation without the prior written permission from the copyright
holders. This publication is provided for informational purposes only. The
manufacturer makes no representations or warranties with respect to the
contents or use of this manual and specifically disclaims any express or implied
warranties of merchantability or fitness for any particular purpose. The user will
assume the entire risk of the use or the results of the use of this document.
Further, the manufacturer reserves the right to revise this publication and make
changes to its contents at any time, without obligation to notify any person or
entity of such revisions or changes. © 2005. All Rights Reserved.
Trademarks
Product names or trademarks appearing in this manual are for identification
purpose only and are the properties of the respective owners.
Caution
To avoid damage to the system, use the correct AC input voltage range.....
To reduce the risk of electric shock, unplug the power cord before removing the
system chassis cover for installation or servicing. After installation or servicing,
cover the system chassis before plugging the power cord.
Battery: 1. Danger of explosion if battery incorrectly replaced. 2. Replace only
with the same or equivalent type recommend
by the manufacturer. 3. Dispose of
used batteries according to the battery manufacturer’s
instructions.
Notice
The system board and accessories in the package may not come similar to the
information stated in this manual. This may differ in accordance to the sales region
or models in which it was sold. For more information about the standard
package in your region, please contact your dealer or sales representative.
FCC and DOC Statement on Class B
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accord-
ance with the instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio TV technician for help.
Notice:
1. The changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
2. Shielded interface cables must be used in order to comply with the emission
limits.
3
1
Quick Setup Guide
Quick Setup
Guide
Table of Contents
Chapter 1
Quick Setup Guide.............................................
Chapter 2
English......................................................................
Chapter 3
Français....................................................................
Chapter 4
Deutsch...............................................................................
Chapter 5
Español............................................................................
Chapter 6
Ðóññêèé.......................................................................
4
17
21
25
29
33
The user’s manual in the provided CD contains detailed information about the system board. If, in some
cases, some information doesn’t match those shown in this manual, this manual should always be re-
garded as the most updated version.
Le manuel d’utilisateur dans le CD muni contient renseignement détaillé au sujet de carte de système. Si,
en quelque cas, quelque renseignement n’appareille de ce que dit dans ce manuel, ce manuel doit
toujours être considéré comme la plus nouvelle version.
Das Benutzerhandbuch in der angebotenen CD enthält detaillierte Informationen über die Hauptplatine.
Wenn in manchen Fällen manche Informationen nicht denjenigen Informationen dargestellt in diesem
Handbuch entsprechen, soll dieses Handbuch als die meist aktualisierte Ausgabe gelten.
El uso explicativo contene información detalle sobre la sistema board en el CD preparativo. Si en algún
caso, la información no es igual con el uso explicativo, necesita ver el uso explicativo, esque es más
nuevo.
 ðóêîâîäñòâå ïîëüçîâàòåëÿ íà ïðåäîñòàâëÿåìîì CD äèñêå ñîäåðæèòñÿ ïîäðîáíàÿ
èíôîðìàöèÿ î ìàòåðèíñêîé ïëàòå. Èíîãäà íàïå÷àòàííîå ðóêîâîäñòâî ìîæåò íå
ñîâïàäàòü ðóêîâîäñòâîì íà CD, òàê êàê ïîñëåäíåå íàèáîëåå ÷àñòî îáíîâëÿåòñÿ è
ÿâëÿåòñÿ ñàìûì ñâåæèì.
4
Quick Setup Guide
1
Quick Setup
Guide
System Board Layout
Chapter 1 - Quick Setup Guide
5
1
Quick Setup Guide
Quick Setup
Guide
System Memory
•DIMMs are on the same channel.
•DIMMs in a channel can be identical or
completely different. However, we highly
recommend using identical DIMMs.
•Not all slots need to be populated.
•DIMMs of the same memory configura-
tion are on different channels.
Single Channel
Dual Channel
Memory Configurations
The table below shows the DIMM sockets that must be populated
with DIMMs for single or dual channel interface. We strongly
recommend that you strictly follow the memory configurations below.
Installing DDR DIMMs other than the recommended configurations
may cause system boot failure.
DDR 1
-
DDR 1
DDR 1
-
DDR 1
Dual Channel
Dual Channel
Dual Channel
Single Channel
Single Channel
Single Channel
DDR 2
-
DDR 2
-
-
-
-
DDR 3
DDR 3
-
DDR 3
DDR 3
-
DDR 4
DDR 4
-
-
-
DDR 4 Channel B
DDR 3 Channel A
DDR 2 Channel B
DDR 1 Channel A
6
Quick Setup Guide
1
Quick Setup
Guide
Important Notes on Memory Usage
1. The system board will fail to boot when 3 DIMMs are used.
The integrated memory controller in AMD's 64-bit Socket 939
series CPU supports dual channel however when 3 DIMMs are
installed, the controller is not capable of accurately distinguishing
between dual and single channels resulting to boot up problem.
Even if you have luckily booted the system, the total memory
size detected is from 2 DIMMs only, not 3.Therefore we do not
suggest using 3 DIMMs.
Memory Speed
DDR400
DDR400
DDR400
DDR400
DDR400
DDR333
DDR400
DDR400
DDR400
DDR333
DIMM 1
S
D
S
D
S
D
S
D
DIMM 2
S
D
S
D
DIMM 3
S
D
S
D
S
D
DIMM 4
S
D
"S": Single side DIMM
"D": Double side DIMM
2. The table below lists different memory configurations and their
corresponding memory speed. Take note that some memory
configurations will automatically reduce the memory speed to
DDR333.
If in any case the system becomes unstable, set the memory
timing from “1T” to “2T” in the “1T/2T Memory Timing” field
(Genie BIOS Setting submenu of the Award BIOS).
7
1
Quick Setup Guide
Quick Setup
Guide
Jumpers
Important:
The 5VSB power source of your power supply must support
≥
720mA.
Clear CMOS Data
PS/2 Power Select
2-3 On:
Clear CMOS Data
1-2 On: Normal
(default)
X
JP2
312312
X
JP7 3
1
2
3
1
2
2-3 On: 5VSB
1-2 On: 5V
(default)
8
Quick Setup Guide
1
Quick Setup
Guide
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2
USB ports, the 5VSB power source of your power supply must
support
≥
1.5A. For 3 or more USB ports, the 5VSB power source of
your power supply must support
≥
2A.
USB Power Select
Rear Panel I/O Ports
X
USB 1-4
(JP5) 3
1
2
3
1
2
2-3 On: 5VSB1-2 On: 5V
(default)
2-3 On: 5VSB
1-2 On: 5V
(default)
X
USB 5-10
(JP6)
312312
PS/2
Mouse
PS/2
K/B COM
S/PDIF-out
S/PDIF-in USB 1-2 USB 3-4
1394_1 LAN
Parallel
Line-out
Line-in
Mic-in
9
1
Quick Setup Guide
Quick Setup
Guide
I/O Connectors
Note:
DO NOT use RCA S/PDIF and optical S/PDIF at the same time.
S/PDIF-in/out Jacks
WJ3
1
5
+5V
Key
SPDIF out
SPDIF in
GND
S/PDIF-out
S/PDIF-in
W
IEEE 1394
1394_1
W
W
1394_2
+12V (fused)
1
TPA+
Ground
TPB+
+12V (fused)
Key
TPA-
Ground
TPB-
Ground
210
9
10
Quick Setup Guide
1
Quick Setup
Guide
USB 4
USB 3
Universal Serial Bus Ports
W
USB 2
USB 1
USB 5-6
W
USB 7-8
W
USB 9-10
1
VCC
-Data
+Data
Ground
Key
VCC
-Data
+Data
Ground
N. C.
210
9
CD-in Internal Audio Connector
W
1
4
Right audio
channel
Left audio
channel
Ground
Ground
Table des matières
Langues :
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
