Infineon Technologies XMC 2Go Manuel utilisateur

Microcontroller

Evaluation Board

For XMC1000 Family

Board User‘s Manual

Revision 1.0, 2014-02-20

XMC 2Go Kit with XMC1100

Kit Version 1.0

Edition 2014-02-20

Published by

Infineon Technologies AG

81726 Munich, Germany

Legal Disclaimer

The information given in this document shall in no event be regarded as a guarantee of conditions or

characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any

information regarding the application of the device, Infineon Technologies hereby disclaims any and all

warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual

property rights of any third party.

Information

For further information on technology, delivery terms and conditions and prices, please contact the nearest

Infineon Technologies Office (www.infineon.com).

Warnings

Due to technical requirements, components may contain dangerous substances. For information on the types in

question, please contact the nearest Infineon Technologies Office.

Infineon Technologies components may be used in life-support devices or systems only with the express written

approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the

failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life

support devices or systems are intended to be implanted in the human body or to support and/or maintain and

sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other

persons may be endangered.

XMC 2Go

XMC 2Go Kit with XMC1100

Template: IFX_Template_2011-02-24.dot

Revision History

Page or Item

Subjects (major changes since previous revision)

Revision 1.0,

2014-02-20

Initial release

Trademarks of Infineon Technologies AG

AURIX™, C166™, CanPAK™, CIPOS™, CIPURSE™, EconoPACK™, CoolMOS™, CoolSET™,

CORECONTROL™, CROSSAVE™, DAVE™, EasyPIM™, EconoBRIDGE™, EconoDUAL™, EconoPIM™,

EiceDRIVER™, eupec™, FCOS™, HITFET™, HybridPACK™, I²RF™, ISOFACE™, IsoPACK™, MIPAQ™,

ModSTACK™, my-d™, NovalithIC™, OptiMOS™, ORIGA™, PRIMARION™, PrimePACK™, PrimeSTACK™,

PRO-SIL™, PROFET™, RASIC™, ReverSave™, SatRIC™, SIEGET™, SINDRION™, SIPMOS™,

SmartLEWIS™, SOLID FLASH™, TEMPFET™, thinQ!™, TRENCHSTOP™, TriCore™.

Other Trademarks

Advance Design System™ (ADS) of Agilent Technologies, AMBA™, ARM™, MULTI-ICE™, KEIL™,

PRIMECELL™, REALVIEW™, THUMB™, µVision™ of ARM Limited, UK. AUTOSAR™ is licensed by

AUTOSAR development partnership. Bluetooth™ of Bluetooth SIG Inc. CAT-iq™ of DECT Forum.

COLOSSUS™, FirstGPS™ of Trimble Navigation Ltd. EMV™ of EMVCo, LLC (Visa Holdings Inc.). EPCOS™

of Epcos AG. FLEXGO™ of Microsoft Corporation. FlexRay™ is licensed by FlexRay Consortium.

HYPERTERMINAL™ of Hilgraeve Incorporated. IEC™ of Commission Electrotechnique Internationale. IrDA™

of Infrared Data Association Corporation. ISO™ of INTERNATIONAL ORGANIZATION FOR

STANDARDIZATION. MATLAB™ of MathWorks, Inc. MAXIM™ of Maxim Integrated Products, Inc.

MICROTEC™, NUCLEUS™ of Mentor Graphics Corporation. Mifare™ of NXP. MIPI™ of MIPI Alliance, Inc.

MIPS™ of MIPS Technologies, Inc., USA. muRata™ of MURATA MANUFACTURING CO., MICROWAVE

OFFICE™ (MWO) of Applied Wave Research Inc., OmniVision™ of OmniVision Technologies, Inc.

Openwave™ Openwave Systems Inc. RED HAT™ Red Hat, Inc. RFMD™ RF Micro Devices, Inc. SIRIUS™ of

Sirius Satellite Radio Inc. SOLARIS™ of Sun Microsystems, Inc. SPANSION™ of Spansion LLC Ltd.

Symbian™ of Symbian Software Limited. TAIYO YUDEN™ of Taiyo Yuden Co. TEAKLITE™ of CEVA, Inc.

TEKTRONIX™ of Tektronix Inc. TOKO™ of TOKO KABUSHIKI KAISHA TA. UNIX™ of X/Open Company

Limited. VERILOG™, PALLADIUM™ of Cadence Design Systems, Inc. VLYNQ™ of Texas Instruments

Incorporated. VXWORKS™, WIND RIVER™ of WIND RIVER SYSTEMS, INC. ZETEX™ of Diodes Zetex

Limited.

Last Trademarks Update 2011-02-24

XMC 2Go

XMC 2Go Kit with XMC1100

Table of Contents

Board Users Manual 4 Revision 1.0, 2014-02-20

Table of Contents

Introduction............................................................................................................................................................7

1Overview .............................................................................................................................................7

1.1 Key Features........................................................................................................................................7

1.2 Block Diagram......................................................................................................................................8

2Hardware Description........................................................................................................................9

2.1 Power Supply.......................................................................................................................................9

2.2 Pin Header Connector........................................................................................................................10

2.3 User LEDs..........................................................................................................................................10

2.4 Debugging and UART Communication..............................................................................................11

3Production Data................................................................................................................................11

3.1 Schematics.........................................................................................................................................11

3.2 Components Placement and Geometry.............................................................................................13

3.3 List of Material....................................................................................................................................14

XMC 2Go

XMC 2Go Kit with XMC1100

List of Figures

Board Users Manual 5 Revision 1.0, 2014-02-20

List of Figures

Figure 1 Block Diagram of the XMC 2Go Kit......................................................................................................8

Figure 2 XMC 2Go Kit with XMC1100................................................................................................................9

Figure 3 Pinning of Pin Header ........................................................................................................................10

Figure 4 Recommended Installation Options for the J-Link driver...................................................................11

Figure 5 Schematic of the XMC 2Go Kit with XMC1100..................................................................................12

Figure 6 Components Placement and Geometry.............................................................................................13

XMC 2Go

XMC 2Go Kit with XMC1100

List of Tables

Board Users Manual 6 Revision 1.0, 2014-02-20

List of Tables

Table 1 Features of the XMC 2Go Kit with XMC1100 ......................................................................................7

Table 2 Pins used for the User LEDs..............................................................................................................10

Table 3 XMC1100 Pins used for Debugging and UART Communication.......................................................11

Table 4 List of Material....................................................................................................................................14

XMC 2Go

XMC 2Go Kit with XMC1100

Overview

Board Users Manual 7 Revision 1.0, 2014-02-20

Introduction

This document describes the features and hardware details of the XMC 2Go equipped with the ARM® Cortex™-

M0 based XMC1100 Microcontroller from Infineon Technologies AG.

1 Overview

The XMC 2Go is designed to evaluate the capabilities of the XMC1100 Microcontroller and the powerful, free of

charge tool chain DAVE™.

This board is not cost optimized and does not serve as a reference design.

1.1 Key Features

Table 1 summarizes the features of the XMC 2Go.

Table 1 Features of the XMC 2Go Kit with XMC1100

Topic

Features

Processor

XMC1100 microcontroller (ARM® Cortex™-M0 based) in a 4 x 4 mm VQFN-24

package

Flash

64 kB

RAM

16 kB

Clock Generation

Internal Oscillator

Frequencies

32 MHz CPU clock, 64 MHz Timer clock

Dimensions

14.0 x 38.5 mm

Power Supply

from USB via Debug probe (J-Link) or

3.3V external power

Connectors

Two 8-pin header (pin pitch: 2.54 mm ≙0.1” / between rows: 10.16 mm ≙0.4”)

Pin header fits to breadboard

Debugger

On-Board J-Link Debugger supports

Serial Wire Debug (SWD, ARM Standard)

Single Pin Debug (SPD)

UART-to-USB bridge (virtual COM)

Peripherals

Mapped to pin header X1/X2:

2 Channel USIC (UART, SPI, I2C, I2S, LIN)

6 Channel Analog to Digital Converter (12-Bit resolution)

4 x 16-Bit Timer

External Interrupts (via ERU)

Others:

Real Time Clock

Random Number Generator

Others

2 User LEDs @ P1.0 and P1.1

XMC 2Go

XMC 2Go Kit with XMC1100

Overview

Board Users Manual 8 Revision 1.0, 2014-02-20

1.2 Block Diagram

The block diagram in Figure 1 shows the main components of the XMC 2Go Kit including the power supply

concept. There are following main building blocks:

XMC1100 Microcontroller in a 4x4mm VQFN24 package

On-board USB debugger realized with a XMC4200 Microcontroller for serial wire debug (SWD) and

UART-to-USB Bridge

Two 8 pin header X1 and X2

On-board power generation for power supply of the XMC1100 Microcontroller and the debug IC

2 User LEDs

Figure 1 Block Diagram of the XMC 2Go Kit

XMC1100 VQFN24

32MHz Cortex M0

64kB Flash, 16kB RAM

4 x16-bit timer, 6 Ch 12-bit ADC

2 Ch USIC (UART, SPI, I2C, I2S, LIN)

USIC

EVR

LED2

ADC, CCU4, USIC, ERU0

XMC4200

Debug IC Micro

USB

Voltage

Regulator

+5V

+3.3V

BSL

8-Pin Header X1

P2.7/P2.8, P2.9, P2.10, P2.11, P0.0, P0.5

8-Pin Header X2

P0.6-P0.9, P0.14, P0.15, P2.0, P2.6

XMC 2Go-V1 Kit

XMC1100 in VQFN24

LED1

Debug

LED

Block_Diag.emf

SWD

UART

Debug,

USIC

P1.1

P1.0 GPIO

P2.1

P2.2

P1.2

P1.3

+3.3V

X101

XMC 2Go

XMC 2Go Kit with XMC1100

Hardware Description

Board Users Manual 9 Revision 1.0, 2014-02-20

2 Hardware Description

The following sections give a detailed description of the board hardware and how it can be used. Figure 2

shows the components of the XMC 2Go Kit with XMC1100.

Figure 2 XMC 2Go Kit with XMC1100

2.1 Power Supply

The XMC 2Go Kit must be supplied by an external 5 Volt DC power supply connected to the Micro UBS plugs

(X101). Out of the box with the pre-programmed application and the on-board debugger in operation the XMC

2Go typically draws about 75 mA. This current can be delivered via the USB plug of a PC, which is specified to

deliver up to 500 mA. The Power&Debug LED indicates the presence of the generated 3.3V supply voltage.

An on-board reverse current protection diode will ensure safe operation and protects the USB port of the

Laptop/PC in case power is provided through the pin header X1.

If the board is powered via the USB plug, it’s not recommended to apply an additional power supply to the VDD

pin of X1 (3.3V), because this power supply could drive against the on-board power supply. The VDD pin can be

used to power an external circuit. But care must be taken not to draw more current than 150 mA, which is the

maximum current the on-board voltage regulator can deliver.

After power-up the Debug LED starts blinking. In case there is a connection to a PC via the Debug USB plug

X101 and the USB Debug Device drivers are installed on this PC, the Debug LED will turn from blinking to

constant illumination.

Voltage Regulator &

Reverse Current Protection Diode

Micro USB

XMC1100

Microcontroller

User LED1

@ P1.0

User LED2

@ P1.1

Pin Header X2

Pin Header X1

Power & Debug LED

Pin Header distance fits

to Breadboard

ESD Protection

Diode

Crystal for Debug IC

XMC4200 Debug IC and

UART to USB Bridge

Components.emf

XMC 2Go

XMC 2Go Kit with XMC1100

Hardware Description

Board Users Manual 10 Revision 1.0, 2014-02-20

2.2 Pin Header Connector

The pin headers X1 and X2 can be used to extend the evaluation board or to perform measurements on the

XMC1100. The order of pins available at X1 and X2 corresponds to the pinning schema of the XMC1100

Microcontroller in the TSSOP-16 pin package. The pinning table is also printed onto the bottom side of the PCB.

Figure 3 Pinning of Pin Header

2.3 User LEDs

The port pins P1.0 and P1.2 of the XMC1100 on the XMC 2Go Kit are connected to LEDs exclusively.

Table 2 Pins used for the User LEDs

LED

Port Pin

LED1

P1.1

LED2

P1.0

P0.6

Pin_Header.emf

P0.7

P0.8

P0.9

P0.14

P0.15

P2.0

P2.6

P0.5

P0.0

3.3V

GND

P2.11

P2.10

P2.9

P2.7

Table des matières

Autres manuels Infineon Technologies Carte mère

Infineon Technologies

Infineon Technologies TLE983 Series Manuel utilisateur

Infineon Technologies

Infineon Technologies TLE9278BQX Manuel utilisateur

Infineon Technologies

Infineon Technologies XMC1300 Manuel utilisateur

Infineon Technologies

Infineon Technologies EVAL-C101T-IM231 Manuel utilisateur

Infineon Technologies

Infineon Technologies TLD5099EP Manuel utilisateur

Infineon Technologies

Infineon Technologies TLE9845 Manuel utilisateur

Infineon Technologies

Infineon Technologies IR3899 Manuel utilisateur

Infineon Technologies

Infineon Technologies H-Bridge Kit 2Go Manuel utilisateur

Infineon Technologies

Infineon Technologies Cypress CYTVII-B-H-8M-176-CPU Manuel utilisateur

Infineon Technologies

Infineon Technologies SDA 55 TVTEXT PRO Manuel utilisateur

Infineon Technologies

Infineon Technologies Cypress MB39C503-EVBSK-01 Manuel utilisateur

Infineon Technologies

Infineon Technologies TLE9842QX Manuel utilisateur

Infineon Technologies

Infineon Technologies TLE987x EvalBoard Manuel utilisateur

Infineon Technologies

Infineon Technologies Cypress S6SAP413A00SA1001 Manuel utilisateur

Infineon Technologies

Infineon Technologies TLE9879QX Manuel utilisateur

Infineon Technologies

Infineon Technologies TLD5099EP B2G Manuel utilisateur

Infineon Technologies

Infineon Technologies EVAL-M1-099M-C Manuel utilisateur

Infineon Technologies

Infineon Technologies XMC4700 Relax Lite Kit Manuel utilisateur

Infineon Technologies

Infineon Technologies Cypress MB39C502-EVBSK-01 Manuel utilisateur

Infineon Technologies

Infineon Technologies SupIRBuck IR3837 Manuel utilisateur

Infineon Technologies

Infineon Technologies EVAL-FFXMR12KM1DR Manuel utilisateur

Infineon Technologies

Infineon Technologies EVALM1099MCTOBO1 Manuel utilisateur

Infineon Technologies

Infineon Technologies OptiMOS IR38263 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur