INETVU® MOBILE SYSTEM QUICK START – NEWTEC
C-COM Satellite Systems Inc. Page 4
1.2 System Overview
The iNetVu Mobile Satellite system is an automatic satellite pointing system for two-way satellite
communications. It has been designed to automatically acquire the satellite beam based on both a GPS
and other positioning parameters. It is targeted for mobile users that require high speed Internet access
in remote locations where cable and DSL do not exist. It provides two-way, high-speed data
communications over satellite. iNetVu™ empowers mobile users with the ability to stop anywhere there
is Satellite coverage and access Internet at broadband speeds. The iNetVu™ Mobile application
consists of the iNetVu™ Mobile software 7710 software (for the 7700 Series Controller
iNetVu™ Mobile Application
Key Features:
•Automatic re-peak on satellite upon signal loss.
•Automatic dish stow if Mobile Platform moves
•If the vehicle is moved before the dish is stowed, the dish will sense movement and will
automatically begin stowing itself.
•The dish will not transmit unless it is pointed adequately to meet cross-polarization
specifications.
•The system will automatically find any satellite from any point on the Earth within its coverage
area.
•Displays comprehensive information about the satellite, dish, motors, GPS, compass, control
box, and modem.
•Finds the satellite, peaks the signal strength and selects the optimal path to perform the selected
satellite, allowing the customer’s computer to be online as soon as possible
•Simple to install, configure and operate.
1.3 General
All iNetVu™ Mobile Systems have been fully tested with the iNetVu ™ 7700 Controller prior to shipment.
All position feedback; limit sensing, limit switches and motor speeds have been calibrated and preset
prior to shipping. The wave-guide, the boom mounted Radio Transmitter cables and the
Transmission/Receive coaxial cables have all pre-wired. There is no need to re-calibrate the Mobile
Platform unless directed by a C-Com Support Technician.
It is critical that the iNetVu™ Controller stay together with the Mobile Platform it shipped with. You may
refer to the iNetVu™ Shipping Checklist to confirm this.
The iNetVu™ Mobile System has been designed for either roof rack mounting or mounting directly to a
vehicle. The iNetVu ™ Mobile Platform should always be secured to the vehicle.
