General Information
PROmesh P10X –User Manual 6
1 General Information
Please read this document thoroughly from start to finish before you begin installing the device and taking
the device into operation.
1.1 Overview of the PROmesh P10X –Function Scope
The PROmesh P10X is an industrial Ethernet switch with management and PROFINET functions that can
be configured easily and conveniently via a web application. It supports the effective setup of all network
topologies, such as bus, star, and ring structure in your plant, with its comprehensive functions with cut
through technology.
Features:
Web application for configuration
Reverse polarity protected supply 12-48V DC; redundant operation possible
Line diagnostics
Leakage current monitoring
Port statistics (network load in ms, errors, discards)
Alarm management
8 x 10/100 Mbit/s M12 D-coded
2 x 10/100/1000 Mbit/s X-coded
Switch technology: Cut-through
MAC address table: 16K (16384 addresses)
PROFINET Conformance Class B
PROFINET Netload Class III
Quality of Service (QoS) with eight priority queues
Prioritisation by class of service (COS), type of service (TOS), or port priority
Limitation of incoming and outgoing packets
Port Mirroring (Rx/Rx and Tx packets)
Port-based VLAN with 4096 possible VLAN IDs
Simple Network Time Protocol (SNTP)
Simple Mail Transfer Protocol (SMTP)
Web interface access via HTTP/HTTPS
Simple Network Management Protocol (SNMP), v1, v2c, v3
Update, save, and backup the system configuration via web interface, TFTP
