impro technologies IMPROX O16 Manuel utilisateur
MODEL NUMBER: XOT900-0-0-GB-XX
IMPROXO16
ImproX O16 16 Channel Output Terminal
INSTALLATION MANUAL
SPECIFICATIONS
Working Environment .................
Mounted vertically, with the Cable Entry Glands
at the lower side, the Terminal is designed to
work in an indoor or outdoor environment
similar to IP43.
Input Voltage................................
10 V DC to 30 V DC, polarity sensitive.
Power Requirements
Current (mA)
Power (W)
Input Voltage 10 V DC
Relays and Indicators all OFF
35.40
0.36
Input Voltage 30 V DC
Relays and Indicators all OFF
16.50
0.49
Input Voltage 10 V DC
Relays and Indicators all ON
400
4
Input Voltage 30 V DC
Relays and Indicators all ON
131
3.90
Relays
Relay Output..........................
16 Relays, each with NO, COM and NC
contacts.
Relay Contact Ratings ...........
1 A at 30 V DC.
2 A at 125 V AC.
Status Indicators
Relay Status...........................
16 Red LEDs (On when Relay operates),
(externally visible).
Power Polarity Indicator .........
Red LED (internally visible).
Incoming RS485 Data............
Flashing Green LED (externally visible).
Outgoing RS485 Data............
Flashing Red LED (externally visible).
Unit Status .............................
Red LED (Software controllable) (externally
visible).
XOT300-0-0-GB-02
July 2009
Page 2
INSTALLATION INFORMATION
Accessories
Find the following when unpacking the Terminal:
An ImproX O16 16 Channel Output Terminal housed in a Black powder-coated
Aluminium extruded Cabinet. The Cabinet is sealed at each end with a Nylon End
Plate, secured with 4 Allen Head Screws (M3 x 12 mm).
Two Plastic Bushing Plugs (20.6 mm).
A 2.5 mm Allen Key.
Four Brass Wood Screws (3.5 mm x 25 mm).
Four Wall Plugs (7 mm).
An extra Fixed Address Label.
General
Remember the following when installing the Terminal:
Communications Distance
The RS485 communications distance between the first ImproX Controller and the LAST
ImproX unit in a cable run, MUST NOT exceed 1 km (1 094 yd). Achieve this by using
good quality screened twisted pair cable, with the screen EARTHED at one end.
Jumper Links
Long transmission lines or multiple “star” connections, may cause communication
problems. Placing a Jumper Link across the jumper [LNK1] in the LAST UNIT AT THE
END OF THE CABLE RUN should solve the problem.
EARTH Connection
Connect the Terminal to a good EARTH point. Using the RS485 Port, connect the
EARTH Lead to the „ETH‟Terminal. Mains EARTH can be used, but electrical noise
may exist.
Blank Space
XOT300-0-0-GB-02
July 2009
Page 3
Arc Suppression
Snubber devices are recommended for EMF Flyback and Arc Suppression when
driving an inductive load with the Relay, see Figure 1.
Figure 1: EMF Flyback and Arc Suppression on the ImproX O16
Mounting the Terminal
CAUTION: Make certain that you mount the ImproX O16 on a vibration-free
surface.
Select the mounting position of the Terminal, considering accessibility, routing of wires
and visibility of the externally visible LEDs.
Secure the enclosure to the mounting surface, using four suitable screws and wall
plugs (supplied), nuts and bolts or rivets.
Blank Space
XOT300-0-0-GB-02
July 2009
Page 5
Fixed Address Label
Once the ImproX O16 is installed, sketch a rough site plan. Attach the loose (additional
Fixed Address Label packaged with the Terminal) Fixed Address Label in the position
of the Terminal on the sketched site plan. When the system installation is complete
and all the units are represented on the site plan by their Fixed Address Labels, file the
site plan for future reference.
GUARANTEE OR WARRANTY
This product conforms to our Guarantee or Warranty details placed on our Web Site, to
read further please go to www.impro.net.
USER NOTES
XOT300-0-0-GB-02
July 2009
Page 6
USER NOTES
XOT300-0-0-GB-02
July 2009
Page 7
USER NOTES
XOT300-0-0-GB-02
July 2009
Page 8
This manual is applicable to the ImproX O16 16 Channel Output Terminal,
XOT900-0-0-GB-00.
(The last two digits of the Impro stock code indicate the issue status of the product).
XOT300-0-0-GB-02
Issue 03
Jul 2009
ImproX O16\English Manuals\LATEST ISSUE\
ImprXO16-insm-en-03.docx
Table des matières
Autres manuels impro technologies Terminal tactile
Manuels Terminal tactile populaires d'autres marques
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Manuel utilisateur
Ingenico
Ingenico AXIUM EX4000 Manuel utilisateur
Heisei Electronics
Heisei Electronics Q-POS 815 Manuel utilisateur
Amano
Amano MTX-15 Manuel utilisateur
FLOWBIRD
FLOWBIRD CWT Compact Touch Manuel utilisateur
Demco
Demco SP7 Manuel utilisateur
