Impex WM-MXS Manuel utilisateur

WM-MXS OLYMPIC BENCH

IMPEX INC.

14777 Don Julian Rd., City of Industry, CA 91746

Tel: (800) 999-8899 Fax (626) 961-9966

www.impex-fitness.com

[email protected]

NOTE:

Please read all

instructions carefully

before using this product

Table of Contents

Safety Notice

Hardware Identifier

Assembly Instruction

Exploded Diagram

Parts List

Warranty

Ordering Parts

Model

WM-MXS

Retain This

Manual for

Reference

May 31, 2001

OWNER'S

MANUAL

TABLE OF CONTENTS

BEFORE YOU BEGIN....................................................................................................... 1

IMPORTANT SAFETY NOTICE........................................................................................ 2

HARDWARE IDENTIFIER................................................................................................ 3

ASSEMBLY INSTRUCTIONS........................................................................................... 4

EXPLODED DIAGRAM..................................................................................................... 11

PARTS LIST...................................................................................................................... 12

WARRANTY...................................................................................................................... 13

ORDERING PARTS.......................................................................................................... 13

BEFORE YOU BEGIN

Thank you for selecting the WM-MXS BENCH by IMPEX FITNESS

PRODUCTS. For your safety and benefit, read this manual carefully

before using the machine. As a manufacturer, we are committed to

provide you complete customer satisfaction. If you have any

questions, or find there are missing or damaged parts, we guarantee

you complete satisfaction through direct assistance from our factory.

To avoid unnecessary delays, please call our TOLL-FREE customer

service number. Our Customer Service Agents will provide

immediate assistance to you.

Toll-Free Customer Service Number

1-800-999-8899

Mon. - Fri. 9 a.m. - 5 p.m. PST

www.impex-fitness.com

[email protected]

IMPORTANT SAFETY NOTICE

PRECAUTIONS

This exercise machine is built for optimum safety. However, certain precautions

apply whenever you operate a piece of exercise equipment. Be sure to read the

entire manual before you assemble or operate your machine. In particular, note

the following safety precautions:

1. Keep children and pets away from the machine at all times. DO NOT

leave children unattended in the same room with the machine.

2. Only one person at a time should use the machine.

3. If the user experiences dizziness, nausea, chest pain, or any other abnormal

symptoms, STOP the workout at once. CONSULT A PHYSICIAN

IMMEDIATELY.

4. Position the machine on a clear, leveled surface. DO NOT use the machine

near water or outdoors.

5. Keep hands away from all moving parts.

6. Always wear appropriate workout clothing when exercising. DO NOT wear

robes or other clothing that could become caught in the machine. Running

or aerobic shoes are also required when using the machine.

7. Use the machine only for its intended use as described in this manual. DO

NOT use attachments not recommended by the manufacturer.

8. Do not place any sharp object around the machine.

9. Disabled person should not use the machine without a qualified person or

physician in attendance.

10. Before using the machine to exercise, always do stretching exercises to

properly warm up.

11. Never operate the machine if the machine is not functioning properly.

12. A spotter is recommended during exercise.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR

PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE

AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL

INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC.

ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY

DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.

SAVE THESE INSTRUCTIONS.

ASSEMBLY INSTRUCTION

Tools required to assembly the machine:

Two Adjustable Wrenches and Two Allen Wrenches

STEP 1 (SEE Diagram 1)

A.) Connect the Right Upright Beam (#3) to the Rear Stabilizer (#14). Secure them with

one Bracket (#17), two M10x 3 ¾” Carriage Bolts (#47), two M10 Aircraft Nuts (#50)

and two ∅7/8” Washers (#48). Repeat the same procedure to assemble the Left

Upright Beam (#2).

B.) Connect these two Upright Beams by a Cross Brace (#13) in the mid span. Secure

them with one Bracket (#17), two M10 x 3 ¾” Carriage Bolts (#47), two M10 Aircraft

Nuts (#50) and two ∅7/8” Washers (#48) on each side.

C.) Insert two Crutches (#12) into the opening holes on top of Left & Right Upright

Beams. Insert two Lock Knobs (#36) through selected holes to obtain desired

height.

D.) Insert the Left and Right Safety Hooks (#20) & (#21) into the holes on top of the

Crutches (#12). Secure them with two M8 Aircraft Nuts (#51).

DIAGRAM 1

STEP 2 (SEE DIAGRAM 2)

A.) Connect the Main Seat Support (#1) to the Rear Stabilizer (#14). Secure them with

one Bracket (#17), two M10 x 3 ¾” Carriage Bolts (#47), ∅7/8” Washers (#48) and

M10 Aircraft Nuts (#50).

B.) Connect the Main Seat Support (#1) to the Front Stabilizer (#56). Secure them with

one Bracket (#17), two M10 x 3 ¾” Carriage Bolts (#47), ∅7/8” Washers (#48) and

M10 Aircraft Nuts (#50).

C.) Slide the Sliding Block (#10) onto the Chromed Incline Adjustment Bar (#11). Align

the holes then thread a Pull Pin (#37) into the hole to hold the Sliding Block at the

position.

D.) Attach two Bushings (#54) to the Chromed Incline Adjustment Bar (#11). Then

attach the Bushings and Bar to the bracket on the Main Seat Support (#1). Secure

it with one M10 x 3” Allen Bolt (#41), two ∅7/8” Washers (#48), and one M10

Aircraft Nut (#50).

DIAGRAM 2

STEP 3 (SEE DIAGRAM 3)

A.) Attach two Bushings (#54) to the pivot on the Main Seat Support (#1). Attach the

Seat Incline Support Bracket (#8) to the Bushings and align the holes. Secure it

with a M10 x 4 ½” Allen Bolt (#40), two ∅7/8” Washers (#48), and a M10 Aircraft

Nut (#50). Do Not over tighten this nut and bolt. The Bracket needs to be able to

swing.

B.) Attach two Bushings (#54) to the Seat Incline Support Bracket (#8). Attach two

Seat Support Frames (#6) to the Bracket and align the holes. Secure them with a

M10 x 8 ¼” Allen Bolt (#38), two ∅7/8” Washers (#48), and a M10 Aircraft Nut

(#50).

DIAGRAM 3

STEP 4 (SEE DIAGRAM 4)

A.) Attach four Bushings (#54) to the Seat Support Frame (#6).

B.) Attach four Bushings (#54) to the Backrest Supports (#7). Attach one Backrest

Support (#7) to the Seat Support Frame (#6). Align the holes. Please note the

Backrest Support (#7) should be on the inside of the Seat Support Frame (#6).

Secure them with one M10 x 2 3/8” Allen Bolt (#42) and M10 Aircraft Nut (#50).

Repeat the same procedure to install the other side.

DIAGRAM 4

STEP 5 (SEE DIAGRAM 5)

A.) Attach two Bushings (#54) to the pivot on the Main Seat Support (#1).

B.) Attach the two Backrest Supports (#7) to the Pivot and align the holes. Secure

them with one M10 x 6 ¼” Allen Bolts (#39), two ∅7/8” Washers (#48), and one

M10 Aircraft Nut (#50).

C.) Attach two Bushings (#54) to the pivot on the Sliding Block (#10).

D.) Align the holes on the two Backrest Supports (#7) to the Pivot. Secure them with a

M10 x 6 ¼” Allen Bolt (#39), two ∅7/8” Washers (#48), and a M10 Aircraft Nut

(#50).

DIAGRAM 5

STEP 6 (SEE DIAGRAM 6)

A.) Attach the Seat (#22) to the Seat Support Frame (#6). Secure it with four ∅3/4”

Washers (#49) and M8 x 2” Allen Bolts (#44).

B.) Attach the Backrest Board (#23) to the Backrest Support (#7). Secure it with four

∅3/4” Washers (#49) and M8 x 2” Allen Bolts (#44).

DIAGRAM 6

Table des matières

Autres manuels Impex Salle de sport à domicile

Impex

Impex MARCY MWM-1860 Manuel utilisateur

Impex

Impex MARCY MCB-849 Manuel utilisateur

Impex

Impex PM-4400 Manuel utilisateur

Impex

Impex TC-3001 Manuel utilisateur

Impex

Impex MWB-214 Manuel utilisateur

Impex

Impex MARCY MWB-356 Manuel utilisateur

Impex

Impex PLATINUM MARCY PM-9150 Manuel utilisateur

Impex

Impex MARCY MWM 800 Manuel utilisateur

Impex

Impex MARCY AB4000 Manuel utilisateur

Impex

Impex MARCY MWB 758 Manuel utilisateur

Impex

Impex ADI-5100-I Manuel utilisateur

Impex

Impex Marcy Classic MCB 880-MG Manuel utilisateur

Impex

Impex MWB-20101 Manuel utilisateur

Impex

Impex MARCY CLASSIC MWM-977 Manuel utilisateur

Impex

Impex MARCY MWM-1100 Manuel utilisateur

Impex

Impex MARCY MKB-957 Manuel utilisateur

Impex

Impex MARCY MWB-500 Manuel utilisateur

Impex

Impex MWB 715B Manuel utilisateur

Impex

Impex MARCY PLATINUM MP-3105 Manuel utilisateur

Impex

Impex ADBE-10240 Manuel utilisateur

Impex

Impex SB 681 Manuel utilisateur

Impex

Impex MARCY SB-241 Manuel utilisateur

Impex

Impex MARCY MCB-346 Manuel utilisateur

Impex

Impex MARCY DIAMOND MD-8870 Manuel utilisateur

Manuels Salle de sport à domicile populaires d'autres marques

Horizon Fitness

Horizon Fitness OXFORD 6 Manuel utilisateur

Energetics

Energetics Multi Trainer 5.1 Manuel utilisateur

Matrix

Matrix MG-PL Series Manuel utilisateur

Reebok

Reebok Tbr2i Manuel d'utilisation et d'entretien

Weider

Weider 8300 Hard Drive Manuel utilisateur

Pure Fitness

Pure Fitness 8526HE Manuel utilisateur

Weider

Weider 8700 I Guide de démarrage rapide

Bowflex

Bowflex Sport 001-6961 Manuel utilisateur

NordicTrack

NordicTrack E8200 Competition Bench Guide de démarrage rapide

Weider

Weider WEMC10161 Manuel utilisateur

Body Solid

Body Solid GHYP-345 Manuel utilisateur

Evo

Evo TAHOE 5105 Manuel utilisateur

cardiobull

cardiobull RA17 Manuel utilisateur

ParaBody

ParaBody 40 Manuel utilisateur

JLL

JLL Ventus Pro Air Power Manuel utilisateur

Trojan

Trojan Colorado 370 Manuel utilisateur

Octane Fitness

Octane Fitness xRide xR650 Manuel utilisateur

Precor

Precor Discovery Series Manuel utilisateur