ILD 6 Manuel utilisateur

ILD 6 Insert: EN13229 - NS3058

Manual version No. 12-1b B 25-02-2013

Model 6 insert

CONTENT

First use .................................................................................................................................................................. 3

Technical data sheet ............................................................................................................................................. 4

Before installation ................................................................................................................................................. 5

Packing ................................................................................................................................................................... 5

Installation ............................................................................................................................................................. 6

entilation example ............................................................................................................................................ 11

Distance to combustible wall protected by brick or Jøtul Firewall ................................................................ 12

Closed combustion system ................................................................................................................................. 14

Chimney & flue collar .......................................................................................................................................... 14

The chimney effect ............................................................................................................................................. 15

Measurements ..................................................................................................................................................... 17

Setup Examples ................................................................................................................................................... 18

Refuelling on to a low fire bed .......................................................................................................................... 19

Fuel overloading .................................................................................................................................................. 19

Environmental use .............................................................................................................................................. 19

Smoke Control Areas ........................................................................................................................................... 20

Primary air control ............................................................................................................................................... 21

Secondary air control .......................................................................................................................................... 22

Ash drawer and bottom grate ............................................................................................................................ 23

Dampers left open ............................................................................................................................................... 23

Fuel........................................................................................................................................................................ 24

Lighting the stove ............................................................................................................................................... 25

Cleaning maintenance ......................................................................................................................................... 26

Trouble shooting .................................................................................................................................................. 27

Thank you for having confidence in us

Thank you for having confidence in usThank you for having confidence in us

Thank you for having confidence in us

Ild is a range of safe, environmentally friendly and efficient high-quality stoves, which meet all

requirements for a modern heating source. In order to get the best out of your stove, we

recommend that you read this booklet and our homepage www.ildstoves.com carefully.

First use

First useFirst use

First use

Before the stove is fired up for the first time, we advise you to open all windows and doors in

the room to ensure optimum ventilation. When the stove is at operating temperature, the

surface paint will harden and emit a strong odour for a short time. As the stove heats up and

cools down there may be expansion and contraction noises from the metal. This is normal.

Technical data sheet

Technical data sheetTechnical data sheet

Technical data sheet

Model 6 Wood Units

CO-Emission at 13% O2 : 0,097 %

NOx @ 13% O2 71 mg/Nm

Efficiency 83 %

Nominal performance 4,5 Kw.

Chimney temperature EN13229 204 C

Recommended under pressure in flue connection piece 16 Pa.

Flue pipe under pressure EN 13229 12 Pa.

Combustion air requirements 12 m3/h

Fuel consumption 1,32 Kg/h

Refuelling amount. 1,05 Kg.

Refuelling frequency for nominal output 47 Min.

Weight 54 Kg.

Flue connection piece internal diameter 126 mm.

Flue connection piece external diameter 130 mm.

Max. Fuelsize diameter 80 mm.

Max. Fuel length 155 mm.

Heat output range 4,3 – 4,9 Kw.

Type of verification EN 13229NS3058-Din+

Before

BeforeBefore

Before

installation

installationinstallation

installation

Ensure that your Local registered installer can recommend wood stove installation

Ensure that updated European, national and local standards can be fulfilled

Ensure that the area can support the stove and installation weight

Ensure that there will be sufficient space and access to service

Ensure that the Chimney has a minimum draft of 12 Pa.

Ensure that the heat output of the stove is suitable for the room

Ensure that combustible materials are at least 125 mm + thickness of insulation, from the rear

part of the stove.

Warning! It is not allowed to make any unauthorised changes to the stove

Packing

Packing Packing

Packing

The stove comes packaged in the cardboard box on wooden pallet nailed down on vertical

boards at the corners. In cardboard box stove is fixed with EPS styrofoam elements.

Consult local regulations on the disposal of these materials; the wood has been treated to

repel vermin and may not be burnt in stove.

Installation

Installation Installation

Installation

Prepare a non-combustible base with spare space (+) for the convection box which is: W 390

(+) H 550 (+) Depth 350 (+)

Hearth must be minimum 350 mm. Higher than floor and 150 mm wider at both sides than

outer frame in front it must reach out 450 mm from frame .

In the United Kingdom, Hearth depth must meet local standards. This is 300mm in front of the

stove and 150mm each side of the stove.

After unpacking the stove, the first thing which needs to be done is remove the baffle plate

from the firebox. In order to remove the baffle plate you need to remove two pins (Picture 1)

and after that draw baffle plate out from the firebox (Picture 2).

Picture

After removing the baffle plate you need to unscrew 4 bolts which hold connecting piece for

close combustion (Picture 3).

Picture 3

The firebox should be removed from the convector box before installation. This is done in a

few steps.

1. The frame is secured by 2 bolts top and 4 bolts bottom. Using a 3mm Allen key, remove

these and keep frame and bolts safe and protected. (fig 5).

2. Using a 5mm Allen key, unscrew the 1 bolt that secures the firebox to the convector

box (fig 4)

Picture 4 Picture 5

3. Remove the 4 bolts holding the flue spigot to the convector box (fig 7).

4. Lift the firebox a little and drag it forwards slightly (fig 6).

Picture 6 Picture 7

5. From inside the convector box remove the 4 nuts holding the connector plate in place.

(fig 8)

6. Make the flue pipe connection to the spigot and secure with the 2 Allen bolts. This is

done above the convector box (fig 9).

Picture

7. Now the convector box can be positioned. Once in place, the flue spigot and flue pipe

can be fed through the aperture at the top of the convector box (fig 10)

Picture 1

8. Reconnect the connector plate with the 4 nuts to hold the flue spigot loosely in place

(fig 11).

9. Level the convector box using the 4 leveling screws in the base of the convector box.

(fig 12).

Picture 11 Picture 12

10. There are 4 pre drilled holes in both the base and the side of the convector box for

securing it to the hearth. Ensure appropriate fixings are used. NO PLASTIC PLU S etc.

(fig 13 & 14).

Picture 13 Picture 14

11. Once the convector box is secured, the firebox can be re-inserted and the flue spigot re-

attached using the 4 bolts removed earlier. (Fig 15 & 16)

12. Re-connect the firebox using the 1 bolt that was removed earlier. (fig 17).

Picture 15 Picture 16

13. Replace baffle plate and pins. (fig. 18)

Picture 17 Picture 18

Table des matières

Autres manuels ILD Poêle

ILD

ILD 12 ECO Manuel utilisateur

ILD

ILD 9 ECO Manuel utilisateur

ILD

ILD 15 ECO Manuel utilisateur

Manuels Poêle populaires d'autres marques

Arada

Arada Cassette Stove Manuel utilisateur

Parmco

Parmco FS 600 Manuel utilisateur

MCZ

MCZ SUITE AIR 10 M2 Manuel utilisateur

HearthStone

HearthStone Stowe DV 8321 Guide de dépannage

Cattara

Cattara FAMILY Manuel utilisateur

Stanley

Stanley Argon F500 OVAL Manuel utilisateur

Avalon

Avalon B-VENT Manuel utilisateur

Nordpeis

Nordpeis Vega Manuel utilisateur

Exquisit

Exquisit EKC601-5 Manuel d'utilisation

Stanley

Stanley Oisin Oil MK II Manuel du propriétaire

Thermocet

Thermocet Brookfield S/CC Manuel utilisateur

HASE

HASE delhi Manuel utilisateur

Vermont Castings

Vermont Castings Intrepid 2 Manuel utilisateur

Italiana Camini

Italiana Camini CLASSICA Guide de démarrage rapide

Avalon

Avalon Vashon Avanti DVS FS Manuel utilisateur

Spartherm

Spartherm ambiente a1 Manuel utilisateur

Dimplex

Dimplex MCFSTV12AU Manuel utilisateur

Warmlite

Warmlite WL46040 Manuel utilisateur