IFM Electronic Efector 500 PP2001 Manuel utilisateur
Operating instructions
Programming and display unit
PP2001
704635 / 00 05 / 2009
UK
2
Contents
1 Preliminary note....................................................................................................3
1.1 Explanation of symbols ..................................................................................3
2 Safety instructions ................................................................................................3
3 Items supplied ......................................................................................................4
4 Functions and features.........................................................................................4
5 Function................................................................................................................4
6 Installation ............................................................................................................5
7 Electrical connection.............................................................................................5
7.1 Offline operation .............................................................................................5
7.1 Online operation .............................................................................................6
8 Operating and display elements...........................................................................7
9 Menu.....................................................................................................................8
9.1 Menu structure ...............................................................................................8
10 Operation............................................................................................................9
10.1 Connection of a sensor / initialisation...........................................................9
10.2 Setting the sensor parameters ...................................................................10
10.3 Copying the parameter set of a sensor ......................................................12
10.4 Changing a stored parameter set...............................................................13
10.5 Transferring a parameter set to other sensors ...........................................14
10.6 Remote display / remote evaluation ...........................................................15
11 Scale drawing ...................................................................................................16
12 Technical data...................................................................................................17
3
UK
1 Preliminary note
1.1 Explanation of symbols
►Instruction
> Reaction, result
[…] Designation of pushbuttons, buttons or indications
→Cross-reference
Important note:
Non-compliance can result in malfunctions or interference.
2 Safety instructions
Please read the product description prior to set-up of the unit. Ensure that the•
product is suitable for your application without any restrictions.
If the operating instructions or the technical data are not adhered to, personal•
injury and/or damage to property can occur.
Checkthecompatibilityoftheproductmaterials(→Technicaldata)withthe•
media to be measured in all applications.
The device shall be supplied from an isolating transformer having a secondary
Listed fuse rated as noted in the following table.
Overcurrent protection
Control-circuit wire size Maximum protective device rating [A]
AWG [mm2]
22 0.32 3
20 0.52 5
18 0.82 7
16 1.3 10
14 2.1 20
12 3.3 25
4
3 Items supplied
1: PP2001
2: cable for connection of a sensor to PP2001
Thefollowingcomponentsareavailableasaccessories(tobeorderedseparately):
Connection cable with M12 connector for voltage supply and output signals of•
thesensor(→catalogueorwww.ifm.com).
24Vpowersupply(orderno.E30080).•
4 Functions and features
The unit can be used for diagnosis and parameter setting of pressure sensors.
The sensor must be suitable for communication with PP2001 or PP2000. Check
the indications in the operation instructions of the sensor.
PP2001issuitableformobileuseaswellasforpermanentinstallation(→6•
Installation).
Sensors can be read and parameterised before installation and set-up or dur-•
ing operation.
If you change parameters during operation, the operating principle of the
production plant will be influenced.
Ensure that there will be no malfunctions in your plant.►
5 Function
The unit fulfils the following functions:
It supplies the sensor with operating voltage.•
It detects type, measuring range and the current parameter set of the sensor.•
It reads and displays the current measured value of the sensor.•
It transmits the evaluation signals of the sensor.•
5
UK
It permits modification of the current parameters of the sensor.•
The unit has a rewriteable read-only memory. It can store the parameter set of•
a sensor and transmit it to other sensors of the same type by means of simple
actions(COPYandSEND).
A stored parameter set can be changed and stored again as desired.•
They provide the unit with the following operating options :
Remoteparametersettingofsensors(→10.2).•
Fastprogramming/seriesprogramming(→10.3/10.5).•
Changingastoredparameterset(→10.4).•
Remotedisplay/remoteevaluation(→10.6).•
6 Installation
For stationary operation two types of installation are possible:
Fixing with mounting clamp Fixing with mounting bracket
�
A: mounting clamp (to be ordered sepa-
ratelyasaccessories;orderno.E10077).
A: mounting bracket
Diameter of the bore hole: 18.5...20 mm.
Loosenthethreadedsleeve(B).►
Insert the unit in the bore hole.►
Screw the sleeve and tighten firmly.►
7 Electrical connection
7.1 Offline operation
Operation outside the production plant
Connect24VpowersupplytoPP2001(plugA).►
ConnectthesensortoPP2001(socketB)viathesuppliedconnectioncable.►
6
7.1 Online operation
Operation with installed sensor during operation of the production plant
Disconnect power.►
DisconnecttheconnectorfromthesensorandscrewittoPP2001(plugA).►
ConnectthesensortoPP2001(socketB)viathesuppliedconnectioncable.►
Switch on the supply voltage.►
If you change parameters during operation, the operating principle of the
production plant will be influenced.
Ensure that there will be no malfunctions in your plant.►
7
UK
8 Operating and display elements
1 to 8: indicator LEDs
- LED 2: green = indication of the system pressure in mbar.
- LED 2 + LED 1: green = indication of the system pressure in mWS.
- LED 3: green = indication of the system pressure in bar.
- LED 3 + LED 1: green = indication of the system pressure in mmWS.
- LED 4: green = indication of the system pressure in kPa.
- LED 4 + LED 1: green = indication of the system pressure in inH2O.
- LED 5: green = indication of the system pressure in MPa.
- LED 5 + LED 1: green = indication of the system pressure in mmHg.
- LED 6: green = indication of the pressure system in PSI.
- LED 6 + LED 1: green = indication of the pressure system in inHg.
- LED 7: yellow = output 2 is switched.
- LED 8: yellow = output 1 is switched.
9: Alphanumeric display, 4 digits
- System pressure is displayed.
- Parameters, parameter values and action points are displayed.
10: Set button
- Setting of the parameter values (continuously by keeping the button pressed; incremen-
tallybypressingonce).
- Triggering a COPY or SEND action.
11: Mode/Enter button
- Selection of the parameters and acknowledgement of the parameter values.
8
9 Menu
9.1 Menu structure
1:sensor-specificparameters(dependingontheconnectedsensor)
2: action points of the PP2001
9
UK
10 Operation
10.1 Connection of a sensor / initialisation
1Connect the sensor to PP2001.►
Apply operating voltage.►
Initial display is shown.>
Sensortype(runningdisplay)
2The current measured value is>
displayed.
PP2001 and sensor are operational.
Notes:
If only [COPY] and [SEND] are active in the operating mode, the connected•
sensor does not support the parameter setting and editing functions.
Onlytheevaluatingfunction(Transmissionoftheoutputsignals,→10.6)and
thecopyfunctions(→10.3and10.5)aresupported.
If the sensor is disconnected, a running display indicates the type of the stored•
data set. Then [EDIT] is displayed.
Ifanothersensorisconnected,theinitialisation(step1)startsagain.•
Error messages
[E.COM] Input output error: communication error / data transfer disturbed.
[E.INI] Communication error or data error; initialisation / support of the sensor not
possible.
10
10.2 Setting the sensor parameters
During parameter setting the unit remains in the operating mode. It continues its
monitoring function with the existing parameters until the parameter setting has
been completed.
The following steps must be taken for each parameter setting:
1Connect the sensor to PP2001.►
The unit passes the initialisation>
phase and then displays the current
measured value.
2Selection of the parameter
Press [Mode/Enter] until the re-►
quested parameter is displayed.
3Setting of the parameter value
Press [Set] and keep it pressed.►
Current setting value of the param->
eter flashes for 5 s.
After 5 s: setting value is changed:>
incrementally by pressing the button
once or continuously by keeping the
button pressed.
Numerical values are incremented continuously. For reducing the value: let the dis-
play move to the maximum setting value. Then the cycle starts again at the minimum
setting value.
4Acknowledgement of the parameter
value
Press [Mode/Enter] briefly.►
[SEND] is briefly displayed, then the>
parameter designation.
The new setting value is stored in the>
sensor and now effective.
Setting of other parameters:
Start again with step 1.►
Finishing the parameter setting:
Press [Mode/Enter] several times until the current measured value is displayed or wait►
for 15
s. The unit returns to the operating mode if no button is pressed for 15 s after
acknowledgement of the new parameter value.
Finishing the parameter setting and storing the changed parameter set in PP2001:
Carryoutthe[COPY]action(→10.3)►
Table des matières
Autres manuels IFM Electronic Unité de contrôle
IFM Electronic
IFM Electronic Ecomat 300 AL1030 Guide d'application
IFM Electronic
IFM Electronic Ecomat 300 AC2625 Guide d'application
IFM Electronic
IFM Electronic AS-i AC2505 Manuel utilisateur
IFM Electronic
IFM Electronic AS interface AC506S Manuel utilisateur
IFM Electronic
IFM Electronic Ecomat 300 AC1154 Manuel utilisateur
IFM Electronic
IFM Electronic AS-interface AC2631 Manuel utilisateur
IFM Electronic
IFM Electronic A5 interface AC535A Manuel utilisateur
IFM Electronic
IFM Electronic Efector 500 Manuel utilisateur
IFM Electronic
IFM Electronic Ecomat 300 AC2618 Manuel utilisateur
IFM Electronic
IFM Electronic CR1083 Manuel utilisateur
IFM Electronic
IFM Electronic PDM360 NG Manuel utilisateur
IFM Electronic
IFM Electronic Ecomot 100 CR2511 Guide d'application
IFM Electronic
IFM Electronic AC2028 Manuel utilisateur
IFM Electronic
IFM Electronic ecomot 300 AC2219 Manuel utilisateur
IFM Electronic
IFM Electronic AS-Interface AS-i Series Manuel utilisateur
IFM Electronic
IFM Electronic AL2230 Manuel utilisateur
IFM Electronic
IFM Electronic efector 600 TR2432 Manuel utilisateur
IFM Electronic
IFM Electronic efector 300 SR5906 Manuel utilisateur
IFM Electronic
IFM Electronic efector 600 TR7430 Manuel utilisateur
IFM Electronic
IFM Electronic Ecomat100 CR1083 PDM360 NG Manuel utilisateur
Manuels Unité de contrôle populaires d'autres marques
Festo
Festo Compact Performance CP-FB6-E Manuel de la liste des pièces
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur
JS Automation
JS Automation MPC3034A Manuel utilisateur
JAUDT
JAUDT SW GII 6406 Series Guide rapide
Spektrum
Spektrum Air Module System Manuel utilisateur
BOC Edwards
BOC Edwards Q Series Manuel utilisateur
