IESC MLB 1218 Manuel utilisateur

Motherboard

User Manual

MLB 1218

July 2006 (Revision B)

P/N: 1230B0026301

All rights, including copyright, in the content of this manual are owned or controlled by IESC and

protected by the Taiwan and international copyright act.

No one may, transmit, adapt, assign, compile, rent, sale, change, copy, reproduce, distribute, publish,

display, broadcast, or use in any way the content of this manual, in whole or in part, for any other

purpose whatsoever without the prior written permission of IESC.

All product names or brands mentioned herein are the trademarks of IESC, its subsidiaries or other

respective owners in Taiwan, United States and other countries.

This manual provides the information in relation to the set-up and installation of the product herein.

Nothing herein may be construed as granting any right or license relating to any intellectual property

rights of this manual or product. Unless otherwise provided in the Purchase and Sale Agreement for

this product, manufacturer and distributor of this product will not be liable whatsoever relating to the

distribution and/or use of this product. In addition, manufacturer and distributor of this product hereby

specifically disclaim any express or implied warranties of merchantability, fitness for a particular

purpose, or non-infringement of third party rights in connection with this product.

Manufacturer of this product may have the right to change specifications and product descriptions at

any time without notice.

About This Manual ........................................................................................................................................i

Conventions..................................................................................................................................................i

Safety Precautions.......................................................................................................................................ii

Operation Safety......................................................................................................................................ii

Electrical Safety ......................................................................................................................................ii

Tools Required .......................................................................................................................................iii

Regulatory and Integration Information.....................................................................................................iv

Regulatory Compliance Identification Numbers....................................................................................iv

Product Regulatory Compliance ............................................................................................................iv

Battery Replacement Notice...................................................................................................................vi

1Introduction........................................................................................................................................1-1

1.1 Audience Assumptions.................................................................................................................1-1

1.2 Manual Organization....................................................................................................................1-1

1.3 Product Features...........................................................................................................................1-2

1.4 Motherboard Layout.....................................................................................................................1-4

1.4.1 Connectors and Component Locations.................................................................................1-4

1.4.2 Back Panel Connectors.........................................................................................................1-6

2Hardware Operations ........................................................................................................................2-1

2.1 Before You Start...........................................................................................................................2-1

2.2 Screw Holes..................................................................................................................................2-2

2.3 Battery..........................................................................................................................................2-3

2.3.1 To remove the battery...........................................................................................................2-4

2.3.2 To install the battery.............................................................................................................2-4

2.4 Processor ......................................................................................................................................2-5

2.4.1 To remove the heat sink........................................................................................................2-6

2.4.2 To install the heat sink..........................................................................................................2-7

2.4.3 To remove the processor.......................................................................................................2-8

2.4.4 To install the processor.........................................................................................................2-9

2.4.5 To remove the heat sink socket ..........................................................................................2-10

2.4.6 To install the heat sink socket.............................................................................................2-10

2.5 System Memory .........................................................................................................................2-11

2.5.1 To remove a DIMM............................................................................................................2-14

2.5.2 To install a DIMM..............................................................................................................2-14

2.6 Jumpers ......................................................................................................................................2-15

3Connectors and Jumpers...................................................................................................................3-1

3.1 Power Connectors (J5, J28)..........................................................................................................3-1

3.1.1 Main Power Connector (J5) .................................................................................................3-1

3.1.2 Processor Power Connector (J28) ........................................................................................3-2

3.2 Front Panel IDE Connector (J7)...................................................................................................3-3

3.3 Floppy Connector (J26)................................................................................................................3-5

3.4 Internal USB Port for USB Floppy (J27) .....................................................................................3-6

3.5 Chassis Intrusion Connector (J17)................................................................................................3-7

3.6 Front Panel VGA Connector (J13) ...............................................................................................3-8

3.7 D-sub VGA Port (J39)..................................................................................................................3-9

3.8 Serial Port (J31)..........................................................................................................................3-10

3.9 Keyboard and Mouse Ports (J6, J15)..........................................................................................3-11

3.10 Rear Dual USB Port (J35)..........................................................................................................3-13

3.11 Front Panel USB Connector (J38)..............................................................................................3-14

3.12 I2C (SMBus) Signal Connector for PSU (J46)...........................................................................3-15

3.13 Dual NIC Connector (RJ45) (J14)..............................................................................................3-16

3.14 Management Port (RJ45) (J59) ..................................................................................................3-16

3.15 Fan Power/Fan Tach Connector (J99)........................................................................................3-17

3.16 Mini-SAS Connectors (J1, J2)....................................................................................................3-18

3.17 LCM Connector (Optional) (J33)...............................................................................................3-19

3.18 Jumper Settings (J3, J12)............................................................................................................3-20

3.18.1 System Configuration Jumper (J3).....................................................................................3-20

3.18.2 CPU FSB Clock Jumper (J12)............................................................................................3-21

4BIOS Setup .........................................................................................................................................4-1

4.1 BIOS Setup Utility.......................................................................................................................4-1

4.2 Entering the BIOS Setup Utility...................................................................................................4-2

4.3 Keyboard Command Bar..............................................................................................................4-3

4.4 BIOS Updates...............................................................................................................................4-5

4.4.1 BIOS Requirements..............................................................................................................4-5

4.4.2 ROM Flash...........................................................................................................................4-5

Figure 1-1 Motherboard Overview....................................................................................................1-2

Figure 1-2 Connectors and Component Locations............................................................................1-4

Figure 1-3 Back Panel Connectors....................................................................................................1-6

Figure 2-1 Screws Placement............................................................................................................2-2

Figure 2-2 Battery Location..............................................................................................................2-3

Figure 2-3 Pulling the Battery out of the Holder...............................................................................2-4

Figure 2-4 Putting the Battery into the Holder..................................................................................2-4

Figure 2-5 Processor Location ..........................................................................................................2-5

Figure 2-6 Pulling up the Two Levers...............................................................................................2-6

Figure 2-7 Lifting the Heat Sink up ..................................................................................................2-6

Figure 2-8 Pulling up the Two Levers...............................................................................................2-7

Figure 2-9 Placing the Heat Sink on Top of the Processor................................................................2-7

Figure 2-10 Locking the Two Levers................................................................................................2-7

Figure 2-11 Opening the Load Plate..................................................................................................2-8

Figure 2-12 Lifting the Processor out of the Socket..........................................................................2-8

Figure 2-13 Closing the Load Plate...................................................................................................2-8

Figure 2-14 Putting on the PnP Cap..................................................................................................2-9

Figure 2-15 Aiming the Golden Corner at the Socket.......................................................................2-9

Figure 2-16 Releasing the Screws...................................................................................................2-10

Figure 2-17 Lifting up the Heat Sink Socket...................................................................................2-10

Figure 2-18 Installing the Heat Sink Base Socket...........................................................................2-10

Figure 2-19 System Memory Location............................................................................................2-13

Figure 2-20 Lifting the DIMM out of the Socket............................................................................2-14

Figure 2-21 Pressing the Retaining Clips Outward.........................................................................2-14

Figure 2-22 Inserting the DIMM into the Socket............................................................................2-14

Figure 2-23 System Configuration Jumper Location......................................................................2-15

Figure 2-24 CPU FSB Clock Jumper Location...............................................................................2-15

Figure 3-1 Main Power Connector....................................................................................................3-1

Figure 3-2 Processor Power Connector.............................................................................................3-2

Figure 3-3 Front Panel IDE Connector .............................................................................................3-3

Figure 3-4 Floppy Connector............................................................................................................3-5

Figure 3-5 Internal USB Port for USB Floppy..................................................................................3-6

Figure 3-6 Chassis Intrusion Connector............................................................................................3-7

Figure 3-7 Front Panel VGA Connector............................................................................................3-8

Figure 3-8 D-sub VGA Port ..............................................................................................................3-9

Figure 3-9 Serial Port......................................................................................................................3-10

Figure 3-10 Keyboard Port..............................................................................................................3-11

Figure 3-11 Mouse Port...................................................................................................................3-12

Figure 3-12 Rear Dual USB Port ....................................................................................................3-13

Figure 3-13 Front Panel USB Connector ........................................................................................3-14

Figure 3-14 I2C (SMBus) Signal Connector for PSU......................................................................3-15

Figure 3-15 Dual NIC Connector (RJ45)........................................................................................3-16

Figure 3-16 Management Port (RJ45).............................................................................................3-16

Figure 3-17 Fan Power/Fan Tach Connector...................................................................................3-17

Figure 3-18 Mini-SAS Connector...................................................................................................3-18

Figure 3-19 LCM Connector...........................................................................................................3-19

Figure 3-20 System Configuration Jumper .....................................................................................3-20

Figure 3-21 CPU FSB Clock Jumper..............................................................................................3-21

Table 1-1 Introduction of the Manual................................................................................................1-1

Table 1-2 Product Features................................................................................................................1-2

Table 2-1 Processor Information.......................................................................................................2-5

Table 2-2 DIMM Installation Option in Non-redundant Mode.......................................................2-11

Table 2-3 DIMM Installation Option in Mirrored Mode.................................................................2-12

Table 2-4 DIMM Installation Option in Sparing Mode...................................................................2-12

Table 3-1 Main Power Connector Pin Definition..............................................................................3-2

Table 3-2 Processor Power Connector Pin Definition.......................................................................3-2

Table 3-3 Front Panel IDE Connector Pin Definition .......................................................................3-3

Table 3-4 Floppy Connector Pin Definition......................................................................................3-5

Table 3-5 Internal USB Port for USB Floppy Pin Definition............................................................3-6

Table 3-6 Chassis Intrusion Connector Pin Definition......................................................................3-7

Table 3-7 Front Panel VGA Connector Pin Definition......................................................................3-8

Table 3-8 D-sub VGA Port Pin Definition ........................................................................................3-9

Table 3-9 Serial Port Pin Definition................................................................................................3-10

Table 3-10 Keyboard Port Pin Definition........................................................................................3-11

Table 3-11 Mouse Port Pin Definition.............................................................................................3-12

Table 3-12 Rear Dual USB Port Pin Definition ..............................................................................3-13

Table 3-13 Front Panel USB Connector Pin Definition ..................................................................3-14

Table 3-14 I2C (SMBus) Signal Connector for PSU Pin Definition ...............................................3-15

Table 3-15 Fan Power/Fan Tach Connector Pin Definition.............................................................3-17

Table 3-16 LCM Connector Pin Definition.....................................................................................3-19

Table 3-17 System Configuration Jumper Function........................................................................3-20

Table 3-18 CPU FSB Clock Frequencies and Setting.....................................................................3-21

Table 4-1 BIOS Setup Utility Screen Description.............................................................................4-2

Table 4-2 Keyboard Command Bar Description...............................................................................4-3

Table 4-3 BIOS Requirements Description.......................................................................................4-5

About This Manual

Conventions

Safety Precautions

Regulatory and Integration Information

About This Manual

1230B0026301 i

To make sure that you perform certain tasks properly, take note of the following symbols used

throughout this manual.

Warning: Information to prevent injury to yourself when trying to complete a task.

Caution: Information to prevent damage to the components when trying to complete

a task.

Important: Information that you must follow to complete a task.

Note: Tips and information to aid in completing a task.

About This Manual

1230B0026301 ii

Observe the following safety precautions when you are connecting or disconnecting any device.

Regarding the standards of workstation regulations, do not place the server in the visual

field of the user, because of the glossy front of the case.

Operation Safety

• Any operation on this server must be conducted by certified or experienced engineers.

• Before operating your server, carefully read all the manuals included with the server package.

• Before using the server, make sure that all cables are correctly connected and power cables are not

damaged. If any damage is detected, contact your dealer as soon as possible.

• To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets

and circuitry.

• Before opening the chassis panels, make sure all power cables are unplugged.

• Avoid dust, humidity, and extreme temperatures, place the server on a stable surface.

• If the power supply is broken, do not try to fix it by yourself. Contact an authorized dealer.

• It is recommended that you wear gloves when assembling or dissembling the server to protect from

cuts and scrapes.

• When the server is powered on, heat sinks and the surfaces of certain IC devices may be hot. Do not

touch them. Check whether the fans are functioning properly.

Electrical Safety

• Before installing or removing signal cables, ensure that the power cables for the system unit and all

attached devices are unplugged.

• To prevent electric shock hazard, disconnect the power cable from the electrical outlet before

relocating the system.

• When adding or removing any additional devices to or from the system, ensure that the power

cables for those devices are unplugged before the signal cables are connected. If possible,

disconnect all power cables from the existing system before you add a device.

• Use one hand, when possible, to connect or disconnect signal cables to prevent a possible shock

from touching two surfaces with different electrical potentials.

About This Manual

1230B0026301 iii

• This product is equipped with a three-wire power cable and plug for user safety. Use the power

cable with a properly grounded electrical outlet to avoid electric shock.

Motherboards, adapters, and disk drives are sensitive to static electricity discharge. These devices are

wrapped in antistatic bags to prevent this damage. Take the following precautions:

• If you have an antistatic wrist strap available, use it while handling the device.

• Do not remove the device from the antistatic bag until you are ready to install the device in the

system unit.

• With the device still in its antistatic bag, touch it to a metal frame of the system.

• Grasp cards and boards by the edges. Hold drives by the frame. Avoid touching the solder joints or

pins.

• If you need to lay the device down while it is out of the antistatic bag. Lay it on the antistatic bag.

Before picking it up again, touch the antistatic bag and the metal frame of the system unit at the

same time.

• Handle the devices carefully to prevent permanent damage.

Tools Required

A cross screwdriver or a flat screwdriver is needed to install or remove the components in the server.

Table des matières

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur