ICP DAS USA ET-7044 Manuel utilisateur

ET-7044 Ethernet Remote I/O - QuickStart (Jan/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

P ET-7052/ET-7052 Quick Start Guide

ET-7044

8 Channel Digital Input and 8 Channel Digital Output

Data Acquisition Module with 32-bit Counters

Quick Start Guide

Congratulations on purchasing ET-7044 - 8 Channel Isolated Sink Type Open Collector Output

and 8 Channel Isolated Digital Input and Digital Output Data Acquisition Module with 32-bit

Counters. The most popular automation solution for Ethernet remote monitoring and control

application. This Quick Start Guide will provide information needed to get started with ET-

7044. Please also consult the User Manual for detailed information on the setup and use of ET-

7044.

In addition to this guide, the package includes the following items:

ET-7044 Module Software Utility CD

-ET-7044 Website

http://www.icpdas-usa.com/et_7044.html

-ICP DAS USA Website

http://www.icpdas-usa.com/

Phone : 1-310-517-9888

Email: [email protected]

Tech Support: tech@icpdas-usa.com

ET-7044 Ethernet Remote I/O - QuickStart (Jan/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

PET-7000/ET-7000 Quick Start Guide

-----------------------------------------------------------

Configuring Boot Mode

Init mode: For configuration. After booting, ET-7044 will not run the

default firmware and cannot surf the internet. Use this mode to

update MiniOS7 image.

Normal mode: For normal working. After booting, ET-7044 will run the

default firmware and can use all ET-7044 functions.

----------------------------------------------------------------------------------

Connecting to Network, PC and Power

The ET-7044 is equipped with an RJ-45 Ethernet port for connection to an Ethernet

hub/switch and PC.

ET-7044 Ethernet Remote I/O - QuickStart (Jan/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

PET-7000/ET-7000 Quick Start Guide

---------------------------------------------------------------------------------

Installing the MiniOS7 Utility

Step 1: Get the MiniOS7 Utility tool

The MiniSO7 Utility can be obtained from companion CD or our site:

CD:\Napdos\minios7\utility\minios7_utility\

http://www.icpdas-usa.com/minios7utility.html

Step 2: Follow the prompts to complete the installation

After the installation has been completed, there will

be a new short-cut for MiniOS7 Utility on the

desktop.

----------------------------------------------------------------------------------

Using MiniOS7 Utility to Assign a New IP

The ET-7044 are Ethernet devices, which comes with a default IP address, therefore, you must

first assign a new IP address to the ET-7044.

The factory default IP settings are as follows:

Item

Default

IP Address

192.168.255.1

Subnet Mask 255.255.0.0

Gateway

192.168.0.1

ET-7044 Ethernet Remote I/O - QuickStart (Jan/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

PET-7000/ET-7000 Quick Start Guide

Step 1: Run the MiniOS7 Utility

Double-click the MiniOS7 Utility

shortcut on your desktop.

Step 2: Press “F12” or choose “Search” from the “Connection” menu

After pressing F12 or choosing Search from Connection menu, the MiniOS7 Scan

dialog will appear, that will display a list of all the MiniOS7 modules on your network.

See the status tip, waiting

for the search to be done.

ET-7044 Ethernet Remote I/O - QuickStart (Jan/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

PET-7000/ET-7000 Quick Start Guide

Step 3: Choose the module name and then choose “IP setting” from the toolbar

Choose the module name for fields in the list, and then choose IP setting from the

toolbar.

Step 4: Assign a new IP address and then choose “Set” button

Step 5: Choose “Yes” button

After completing the settings, press the Yes

button in the Confirm dialog box to exit the

procedure.

ET-7044 Ethernet Remote I/O - QuickStart (Jan/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

PET-7000/ET-7000 Quick Start Guide

----------------------------------------------------------------------------------

Enabling Adobe Flash Player in Your Brower

Your browser must support Adobe Flash Player and have it enabled in order to use the

ET-7044 web site.

If you do not have it installed, please go to the following website and install it.

The Adobe Flash Player Download Center:

http://get.adobe.com/flashplayer/

----------------------------------------------------------------------------------

Go to the ET-7044 Web Site to Check out Functions

The ET-7044 contains an advanced web configuration system that provides users with access

ET-7044 applications through a standard web browser.

Step 1: Start ET-7044

Make sure the switch placed in the

“ Normal” position.

Then reboot ET-7044

Step 2: Open a browser

Please use a standard internet browser to view the ET-7044 webpage, such as Mozilla

Firefox or Internet Explorer…etc.

If you haven’t changed the default IP address of the ET-7044, please refer to “4. Using

MiniOS7 Utility to Assign a New IP” to configure it.

Step 4: Fill out the User name and Password

ET-7044 Ethernet Remote I/O - QuickStart (Jan/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

After entering the IP address, the login

dialog box will appear and prompt you to

enter your username and password.

The factory default user name and password

are as follows (Case sensitive) :

Item Default

User name

Admin

Password

Admin

Step 5: Welcome to ET-7044 web site

After logging into the ET-7044 web site, the welcome page will appear.

ET-7044 Ethernet Remote I/O - QuickStart (Jan/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

PET-7000/ET-7000 Quick Start Guide

Under the Main Menu, expand the Web HMI, and

then select the Web HMI option to check the

values of the data acquisition.

Table des matières

Autres manuels ICP DAS USA Enregistreur de données

ICP DAS USA

ICP DAS USA CL-201-WF Manuel utilisateur

ICP DAS USA

ICP DAS USA ET-7002 Manuel utilisateur

ICP DAS USA

ICP DAS USA DL-300-WF Series Manuel utilisateur

ICP DAS USA

ICP DAS USA DL-100S-E Manuel utilisateur

ICP DAS USA

ICP DAS USA PIR-23-WF Series Manuel utilisateur

ICP DAS USA

ICP DAS USA DL-110S-E Manuel utilisateur

ICP DAS USA

ICP DAS USA MDC-211-WF Manuel utilisateur

ICP DAS USA

ICP DAS USA M-7026 Manuel utilisateur

ICP DAS USA

ICP DAS USA CAN-Logger Series Manuel utilisateur

ICP DAS USA

ICP DAS USA DL-1 S-WF Series Manuel utilisateur

ICP DAS USA

ICP DAS USA I-7067 Manuel utilisateur

ICP DAS USA

ICP DAS USA PET-AR400 Manuel utilisateur

ICP DAS USA

ICP DAS USA ET-7053 Manuel utilisateur

Manuels Enregistreur de données populaires d'autres marques

TESTO

TESTO 176 Manuel utilisateur

HT Italia

HT Italia XL421 Manuel utilisateur

HBM

HBM SOMAT XR CX22B-R Manuel utilisateur

Agtrix

Agtrix 380i Manuel utilisateur

Hobo

Hobo H8 Pro Manuel utilisateur

Beijing ART Tech

Beijing ART Tech PCI2320 Manuel utilisateur

Athena

Athena GET SL1 Manuel utilisateur

Motec Systems

Motec Systems C185 Manuel utilisateur

Beijing ART Tech

Beijing ART Tech USB2832 Manuel utilisateur

Rotronic

Rotronic HygroLog HL20 Manuel utilisateur

MRC

MRC DW-6092 Manuel utilisateur

Racelogic

Racelogic VBOX LapTimer Manuel utilisateur

Edu-Logger

Edu-Logger 900-240 Manuel utilisateur

Elma

Elma DT173 Manuel utilisateur

MadgeTech

MadgeTech PRTemp140 Fiche technique

Comet

Comet U0121M Manuel utilisateur

pico Technology

pico Technology PT-104 Manuel utilisateur

Soil Instruments

Soil Instruments GTecLink Manuel utilisateur