ICOP Technology VSX-6124-FD-V2 Manuel utilisateur

Full 16-bit ISA Bus

VSX-6124-FD-V2

DM&P Vortex86SX 300MHz

Half-Size CPU Module

with 4S/4USB/VGA/LCD/LAN/GPIO/FDD

128MB DDR2 Onboard

User’s Manual

(Revision 1.1A)

The information in this manual is subject to change without notice for continuous improvement in

the product. All rights are reserved. The manufacturer assumes no responsibility for any

inaccuracies that may be contained in this document. And makes no commitment to update or to

keep current the information contained in this manual.

No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part,

in any form or by any means without the prior written permission of the ICOP Technology Inc..

Manual No. IUM6124-FD-V2000-01 Ver.1.0A August , 2009

Manual No. IUM6124-FD-V2000-01 Ver.1.1A May , 2010

Trademarks Acknowledgment

Vortex86SXis the registered trademark of ICOP Technology Inc.

Other brand names or product names appearing in this document are the properties

and registered trademarks of their respective owners. All names mentioned herewith

are served for identification purpose only.

T a b l e o f C o n t e n t s

T ab l e o f C o n t e nt s.............................................................iii

C h a p t e r 1 Introduction……………………………………………1

1.1 Packing List............................................................1

1.2 Product Description................................................1

1.3 Specifications.........................................................3

1.4 Board Dimension....................................................5

C h a p t e r 2 Installation……………………………………………..6

2.1 Board Outline.........................................................6

2.2 Connectors & Jumpers Location............................7

2.3 Connectors & Jumpers Summary...........................9

2.4 PinAssignments & Jumper Settings......................11

2.5 System Mapping...................................................24

2.6 Watchdog Timer...................................................27

2.7 GPIO....................................................................28

2.8 SPI flash...............................................................29

C h a p t e r 3 Driver Installation……………………………………30

Appendix ………………………………………………………………..31

A. TFT Flat Panel Data Output......................................31

B. TFTFlat Panel Support List.......................................32

C. LVDS Flat Panel Support List....................................33

D. Flat Panel Hardware Setting.....................................34

E. Flat Panel Wiring and Lighting ..................................35

F. TCP/IPlibrary for DOS real mode..............................36

G. BIOS Default Setting.................................................37

Warranty............................................................................................38

Vortex86SX-6124-FD-V2 Vortex86SXHalf-Size CPU Module

C h a p t e r 1

Introduction

1.1 Packing List

Product Name Package

VSX-6124-FD-V2

Embedded Vortex86SX CPU All-in-One Board

Manual & Drivers CD x 1

RS232 cable x 3

PRINT cable x1

IDE cable x 1

FDD cable x 1

USB cable x 2 (USB port x 2)

GPIO cable x 1

YKB for PS/2 Keyboard & Mouse x 1

Vortex86SX-6124-FD-V2 Vortex86SXHalf-SizeCPUModule 2

1.2 Product Description

The VSX-6124-FD-V2 family of low-power x86 embedded controller is designed to meet

Half-Size specification with full 16-bit ISABus, and integrated with the following features.

300MHz Vortex86SX System-On-Chip

VGA, TFT/LVDS LCD support up to

1280x1024 resolution

128 / 256MB DDR2 system memory

Enhanced IDE

10/100Mbps Ethernet

4 USB 2.0 (host)

Up to 4 serial ports

Parallel port

16-bit GPIOs

Onboard 2MB SPI Flash

PC/104-Plus expansion bus

Meet PC/104 stacking spec.

2 watchdog timer

JTAG interface

AMI BIOS

Single voltage +5V DC

Support extended operating

temperature range of -20°C to +70°C

The VSX-6124-FD-V2 Half-Size family of embedded controller is designed with backward

compatibility in mind, to provide migration path for projects facing end-of-life challenges with their

existing x86 based Half-Size controller. The VSX-6124-FD-V2 family of controller is designed as

a plug in replacement, with backward compatibility to support legacy software to help extend

existing product life cycle without heavy re-engineering.

VSX-6124-FD-V2 is suitable for broad range of data-acquisition, Industrial automation, Process

control,Automotive controller,AVL, Intelligent Vehicle management devic,Medical device,

Human machine interface, Robotics, machinery controlAnd more…application that required

small footprint, low-power and low-cost hardware with open industry standard such as Half-Size.

Vortex86SX-6124-FD-V2 Vortex86SXHalf-SizeCPUModule 3

1.3 Specifications

Features VSX-6124-FD-V2

CPU

DM&P SoC CPU Vortex86SX- 300MHz

Real Time Clock with Lithium Battery Backup

Cache L1:16K I-Cache, 16K D-Cache

BIOS AMI BIOS

Bus Interface PC/104 Standard Compliant (Optional: PCI-104)

System Memory 128 /256MB DDR2 Onboard

Watchdog Timer

Software programmable from 30.5 us to 512 seconds x2

sets(Watchdog 1 fully compatible with M6117D)

VGA

XGI Volari Z9s Chipset

VGA and TFT Flat Panel Interface Support

LVDS Flat Panel Interface Support (Optional)

Onboard 32MB VGA Memory

Support resolution up to 1280 x 1024

LAN Integrated 10/100M Ethernet

Audio CM119 USB Audio Controller (Optional)

I /O Interface Enhanced IDE port x1

FDD x1

RS-232 port x3

RS-232/422/485 port x1 (RS485 Auto Direction)

Parallel port x1

USB port (2.0) x4

16-bit GPIO port x1

10/100Mbps Ethernet port x1

Vortex86SX-6124-FD-V2 Vortex86SXHalf-SizeCPUModule 4

Connectors

2.54 mm 26-pin box header for Print x1

2.54 mm 10-pin box header for RS-232 x3

2.54 mm 10-pin box header for USB x2

2.54 mm 20-pin box header for 16-bit GPIO x1

2.54 mm 3-pin header for RS-485 x1

2.54 mm 2-pin header for Reset x1

2.54 mm 4-pin header for DC-in x1

2.54 mm 7-pin header for Redundancy Signal x1(O)

2.54 mm 2-pin header for SYS-SW-IN x1 (Opt)

2.0 mm 44-pin box header for IDE x1

2.0 mm 44-pin box header for LCD x1

1.25 mm 6-pin Wafer for JTAG x1

1.25 mm 4-pin Wafer for Line-out/MIC-in x2 (O)

External RJ-45 connector for Ethernet x1

External Mini DIN connector for KBD/Mouse x1

External D-Sub 15 pin female connector for VGA x1

External D-Sub 9 pin male connector for RS232 x1

Type I/II Compact Flash Slot x1

4-pin Male Power Connector x1

Flash Disk Support

On board 2MB SPI Flash Disk (Driver: A)

44-pin IDE Flash Disk( EmbedDisk 16MB or above)

Compact Flash Type I/II

SRAM support 512KB (Optional)

Power Requirement Single Voltage +5V @ 660mA

Dimension 184mm X 122mm (7.24 x4.80 inches)

Weight 176g

Operating

Temperature -20oC ~ +70oC

-40°C ~ +85°C (Optional)

Vortex86SX-6124-FD-V2 Vortex86SXHalf-SizeCPUModule 5

1.4 Board Dimension

Vortex86SX-6124-FD-V2 Vortex86SXHalf-SizeCPUModule 6

C h a p t e r 2

Installation

2.1 Board Outline

(Note1: COM2 RS232/422/485 is selected by BIOS setting)

(Note2: PCI-104 connector is optional)

(Note3:Audio is optional)

(Note4: Redundancy Signal and System-Fail-SW are optional)

Vortex86SX-6124-FD-V2 Vortex86SXHalf-SizeCPUModule 7

2.2 Connectors & Jumpers Location

Connectors

Table des matières

Autres manuels ICOP Technology Matériel informatique

ICOP Technology

ICOP Technology VDX3-6724 Manuel utilisateur

ICOP Technology

ICOP Technology VEX-SOM Manuel utilisateur

ICOP Technology

ICOP Technology VDX-6357RD Manuel utilisateur

ICOP Technology

ICOP Technology VDX3-6724-V2 Manuel utilisateur

ICOP Technology

ICOP Technology VSX-6150-V2 Manuel utilisateur

ICOP Technology

ICOP Technology VDX-6350E Manuel utilisateur

ICOP Technology

ICOP Technology VDX-6354RD Manuel utilisateur

ICOP Technology

ICOP Technology HMI-043T-EM41N-BF Manuel utilisateur

ICOP Technology

ICOP Technology VDX-6326RD Manuel utilisateur

ICOP Technology

ICOP Technology IBW-35 Manuel utilisateur

ICOP Technology

ICOP Technology VSX-6158-V2 Manuel utilisateur

ICOP Technology

ICOP Technology VSX-6150E-V2 Manuel utilisateur

ICOP Technology

ICOP Technology Vortex86SX VSX-6101 Manuel utilisateur

ICOP Technology

ICOP Technology VDX-6354D Manuel utilisateur

ICOP Technology

ICOP Technology VDX-6358 Manuel utilisateur

ICOP Technology

ICOP Technology ICOP-602X Manuel utilisateur

ICOP Technology

ICOP Technology VDX-6372RD Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur