IBM System Storage DS4000 Manuel technique

IBM TotalStorage DS4000 Alert Manager Appliance

Planning and Installation Guide

GC26-7739-01



IBM TotalStorage DS4000 Alert Manager Appliance

Planning and Installation Guide

GC26-7739-01



Note:

Before using this information and the product it supports, be sure to read the general information in “Notices” on page 11.

Second Edition (February 2005)

US Government Users Restricted Rights –Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Safety

The caution and danger statements that this document contains can be referenced

in the multilingual IBM

Safety Information document that is provided with your IBM

TotalStorage

product. Each caution and danger statement is numbered for easy

reference to the corresponding statements in the translated document.

vDanger: These statements indicate situations that can be potentially lethal or

extremely hazardous to you. Adanger statement is placed just before the

description of apotentially lethal or extremely hazardous procedure, step, or

situation.

vCaution: These statements indicate situations that can be potentially hazardous

to you. Acaution statement is placed just before the description of apotentially

hazardous procedure step or situation.

vAttention: These notices indicate possible damage to programs, devices, or

data. An attention notice is placed just before the instruction or situation in which

damage could occur.

Before installing this product, read the following danger and caution notices.

©Copyright IBM Corp. 2005 iii

Statement 1:

DANGER

Electrical current from power, telephone, and communication cables is

hazardous.

To avoid ashock hazard:

vDo not connect or disconnect any cables or perform installation,

maintenance, or reconfiguration of this product during an electrical

storm.

vConnect all power cords to aproperly wired and grounded electrical

outlet.

vConnect to properly wired outlets any equipment that will be attached to

this product.

vWhen possible, use one hand only to connect or disconnect signal

cables.

vNever turn on any equipment when there is evidence of fire, water, or

structural damage.

vDisconnect the attached power cords, telecommunications systems,

networks, and modems before you open the device covers, unless

instructed otherwise in the installation and configuration procedures.

vConnect and disconnect cables as described in the following table when

installing, moving, or opening covers on this product or attached

devices.

To Connect: To Disconnect:

1. Turn everything OFF.

2. First, attach all cables to devices.

3. Attach signal cables to connectors.

4. Attach power cords to outlet.

5. Turn device ON.

1. Turn everything OFF.

2. First, remove power cords from outlet.

3. Remove signal cables from connectors.

4. Remove all cables from devices.

iv IBM TotalStorage DS4000 Alert Manager Appliance: Planning and Installation Guide

Statement 3:

CAUTION:

When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or

transmitters) are installed, note the following:

vDo not remove the covers. Removing the covers of the laser product could

result in exposure to hazardous laser radiation. There are no serviceable

parts inside the device.

vUse of controls or adjustments or performance of procedures other than

those specified herein might result in hazardous radiation exposure.

DANGER

Some laser products contain an embedded Class 3A or Class 3B laser

diode. Note the following.

Laser radiation when open. Do not stare into the beam, do not view directly

with optical instruments, and avoid direct exposure to the beam.

Class 1Laser statement

IEC 825-11993 CENELEC EN 60 825

Safety v

Statement 4:

≥18 kg (39.7 lb) ≥32 kg (70.5 lb) ≥55 kg (121.2 lb)

CAUTION:

Use safe practices when lifting.

Statement 5:

CAUTION:

The power control button on the device and the power switch on the power

supply do not turn off the electrical current supplied to the device. The device

also might have more than one power cord. To remove all electrical current

from the device, ensure that all power cords are disconnected from the power

source.

vi IBM TotalStorage DS4000 Alert Manager Appliance: Planning and Installation Guide

Statement 8:

CAUTION:

Never remove the cover on apower supply or any part that has the following

label attached.

Hazardous voltage, current, and energy levels are present inside any

component that has this label attached. There are no serviceable parts inside

these components. If you suspect aproblem with one of these parts, contact

aservice technician.

Safety vii

viii IBM TotalStorage DS4000 Alert Manager Appliance: Planning and Installation Guide

Autres manuels pour System Storage DS4000

Table des matières

Autres manuels IBM Stockage

IBM

IBM Modbus Plus Manuel utilisateur

IBM

IBM N7800 Manuel utilisateur

IBM

IBM Storwize V7000 Gen2 Manuel utilisateur

IBM

IBM System Storage TS2900 Manuel utilisateur

IBM

IBM Cloud Object Storage System Slicestor 2212... Manuel utilisateur

IBM

IBM Storwize V3500 Manuel utilisateur

IBM

IBM DDRS-39130 - Ultrastar 9.1 GB Hard Drive Manuel utilisateur

IBM

IBM Storwize V7000 Manuel utilisateur

IBM

IBM TS7700 Series Manuel utilisateur

IBM

IBM Storwize V7000 Manuel utilisateur

IBM

IBM SAN768B-2 Manuel utilisateur

IBM

IBM DTNA-21800 Manuel utilisateur

IBM

IBM Storwize V7000 Manuel utilisateur

IBM

IBM FlashSystem 720 Mode d’emploi

IBM

IBM TotalStorage DS8000 Manuel utilisateur

IBM

IBM SAN64B-6 Manuel

IBM

IBM 1 GB Microdrive Storage Card Manuel utilisateur

IBM

IBM Storwize V3700 Manuel utilisateur

IBM

IBM SAN768B Manuel

IBM

IBM Storwize V7000 Manuel utilisateur

IBM

IBM B01 Manuel utilisateur

IBM

IBM TotalStorage Ultrium 3580 L23 Manuel

IBM

IBM Travelstar 5GS Manuel utilisateur

IBM

IBM DCS3700 Mode d'emploi

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur