IBM V03 Guide de configuration

IBM4247ModelV03SerialMatrixImpactPrinter

IBM4247ModelV03:

Maintenance Information

Part Number: 75P1301

IBM

Note!

Before using this information and the product it supports, read the information in Safety and

environmental notices and Notices.

First edition (November 2002)

This edition applies to release one of

IBM 4247 Model V03: Maintenance Information

and to all subsequent releases and

modifications until otherwise indicated in new editions.

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

Contents

Safety and environmental notices

Preface

Chapter 1, “Diagnosing problems”

Chapter 2, “Diagnostics”

Chapter 3, “Wiring diagrams”

Chapter 4, “Locations”

Chapter 5, “Removals, service checks and adjustments”

Chapter 6, “Parts catalog”

Chapter 7, “Preventative Maintenance”

Appendix A, “Printer configuration”

Appendix B, “Supplies, forms, paths, & environmental considerations”

Appendix C, “Flashing memory”

Notices

Safety and environmental notices

Safety information .................................................5

Safety notices ..................................................5

Danger hazard level ..............................................5

Caution hazard level ..............................................5

Attention notices .................................................6

Safety precautions ................................................6

Electrical safety.................................................6

Electrostatic discharge (ESD) procedures ...................................7

Approved power cord and receptacle......................................8

Electrical safety and portable power strip receptacles .............................8

Connecting or disconnecting a communication port, a teleport, or an attachment connector..........9

Servicing during an electrical storm ......................................9

Safety inspection .................................................10

Instructions ...................................................10

Reference items................................................10

Safety inspection procedure...........................................10

Performing a power-receptacle safety-check .................................11

Ground connectors check ...........................................12

Environmental notices..............................................15

Product recycling and disposal ........................................15

Safety information

Safety notices

There are two levels of safety notices: Danger and Cautions.

Danger hazard level

The word Danger indicates the presence of a hazard that has the potential of causing death or serious personal

injury.

DANGER notices are numbered <1-1>,<1-2>, and so forth where they appear in the text of this manual. Use the

notice number to locate the national language translation of that notice in

IBM 4247 Model V03: Safety

Information

, (G544-5862).

Example of a Danger notice:

DANGER

<1-10> Hazardous voltages are present. Do not touch the pins or sockets of the power receptacle.

Caution hazard level

The word Caution indicates the presence of a hazard that has the potential of causing moderate or minor

personal injury.

CAUTION notices are numbered <2-1>,<2-2>, and so forth where they appear in the text of this manual. Use the

notice number to locate the national language translation of that notice in

IBM 4247 Model V03: Safety

Information

, (G544-5862).

Example of a Caution notice:

Safety and environmental notices 5

!CAUTION:

<2-22> Carefully follow all cleaning instructions, using only the materials and solutions recommended by IBM.

Attention notices

The word Attention calls attention to the possibility of damage to a program, device, system, or data.

Attention notices are not numbered.

Examples of an Attention notices:

Attention: This is an ESD sensitive device.

Safety precautions

Electrical safety

This printer is inspected and listed by recognized national testing laboratories, such as Underwriters Laboratories,

Inc. (UL) in the U.S.A. and Canadian Standards Association (CSA) in Canada. Listing of a product by a national

testing laboratory indicates that the product is designed and manufactured in accordance with national

requirements intended to minimize safety hazards. IBM

equipment meets a very high standard of safety in

design and manufacture. Remember, however, that this product operates under conditions of high electrical

potentials and heat generation, both of which are functionally necessary.

Because the paper used in the printer can burn, you should take normal precautions to prevent fire. These

precautions include common-sense measures, such as keeping potentially combustible materials (for example,

curtains and chemicals) away from the printer, providing adequate ventilation and cooling, limiting unattended

operation, and having trained personnel available and assigned to the printer.

Safety and environmental notices 6

Electrostatic discharge (ESD) procedures

Read the following electrostatic discharge (ESD) information because, if discharged into the circuitry of an

integrated circuit, static electricity can damage the circuit. The following Attention notice in the text of this book

warns of possible damage caused by ESD.

Attention: This is an ESD sensitive area. See Electrostatic discharge (ESD) procedures before working with

parts that are sensitive to ESD.

Follow these guidelines to prevent damage to ESD-sensitive components:

vKeep an ESD-sensitive part in its original shipping container, usually a protective bag, until you are ready to

install it.

vMake the fewest possible movements to minimize static electricity.

vTouch the metal frame of the printer or the assembly to discharge static electricity in your body just before

touching the ESD-sensitive part.

vHold the ESD-sensitive part by its edges. Do not touch any components, pins, or connectors. If possible, keep

one hand on the frame while you are installing or removing an ESD-sensitive part.

vDo not place an ESD-sensitive part on anything that can provide a discharge path from your body through the

ESD-sensitive part. If you need to put down the ESD-sensitive part, first put it into the ESD protective wrapper

in which it was shipped.

vPrevent ESD-sensitive parts from being touched by other persons.

vCables may connect to logic cards or boards that are ESD-sensitive. Be careful when working with connectors.

vBe careful when working with ESD-sensitive parts when the humidity is low. Low humidity increases static

electricity.

Using the ESD kit:

To safely discharge all static electricity, use the ESD kit following the guidelines under

“Electrostatic discharge (ESD) procedures”.

vTurn off the printer before you put on the ESD wrist band.

vConnect the wrist band to an unpainted, frame-ground point of the printer.

vRemove the ESD wrist band when working on any part of the printer that has power turned on.

Safety and environmental notices 7

vDo not put the ESD mat near any electrical circuit that has power turned on. The internal resistance

(1 megohm) in the ESD cable limits the current if it touches a high voltage.

vDo not put the ESD mat near a grounded surface. Ground the ESD mat only through the ESD cable. The ESD

cable supplies a high resistance to ground for your safety. If the ESD mat touches a grounded surface, the high

resistance in the ESD cable is bypassed, which causes the ESD mat not to work as expected.

Approved power cord and receptacle

DANGER

<1-11> Your country may require an approved power cord and plug. Ensure that you have the correct power cord

and plug. Use this cord and plug only with an approved, correctly-installed power receptacle.

Electrical safety and portable power strip receptacles

Extension cords:

DANGER

<1-12> Do not use an extension power-cord.

The customer must supply the correct electrical outlet which must meet the requirements stated under“Approved

power cord and receptacle”.

Portable power strip receptacles (temporary power taps):

Portable power strip receptacles (referred to as

“temporary power taps” by the National Electrical Code

) may be used if they are fully approved in the customer’s

geographic location. It is the customer’s responsibility to supply a fully approved “temporary power tap”, if one is

to be used.

Safety and environmental notices 8

Connecting or disconnecting a communication port, a teleport, or an attachment connector

DANGER

<1-14> Switch off printer power and unplug the printer power cord before connecting or disconnecting a

communication port, a teleport, or other attachment connector.

Servicing during an electrical storm

DANGER

<1-13> Do not connect or disconnect a communication port, a teleport, or any other connector during an

electrical storm.

Safety and environmental notices 9

Safety inspection

Instructions

Perform this safety inspection before performing any of the following tasks:

vAccept a machine for service agreement

vProvide per-call service

vRelocate a machine

vReview changes or attachments on any IBM machine that is leased, on service agreement, or on per-call

service

Ensure that you correct unsafe conditions before you continue.

Possible safety hazards are:

vElectrical—An electrically charged frame, or exposed wires or connections, can cause serious electrical shock.

vMechanical—A missing safety cover or shield is hazardous. Moving parts, such as gears, shaft, and pulleys

are hazardous.

vChemical—Use only approved cleaning agents. Do not use other solvents or chemicals.

Reference items

You will need the following items:

vA copy of the machine EC history

vA list of current safety ECs

IBM Electrical Safety for IBM Customer Engineers

, S229-8124

Safety inspection procedure

1. Turn off and unplug the printer.

2. Check exterior covers for damage (loose, broken, or sharp edges).

3. Check top main cover interlock operation (see T&D13—Top cover interlock test).

Safety and environmental notices 10

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels IBM Imprimante

IBM

IBM 2CR Manuel utilisateur

IBM

IBM 17 S544-5343-03 Manuel utilisateur

IBM

IBM Infoprint Color 1220 Manuel utilisateur

IBM

IBM 5256-1 Guide de configuration

IBM

IBM 6408-CT0 Manuel utilisateur

IBM

IBM 130 Plus Manuel utilisateur

IBM

IBM 6400 Series Manuel utilisateur

IBM

IBM 1352 - InfoPrint B/W Laser Printer Manuel utilisateur

IBM

IBM InfoPrint 1622 Manuel utilisateur

IBM

IBM InfoPrint 1532 Express Manuel utilisateur

IBM

IBM 4332-004 - InfoPrint 40 B/W Laser Printer Manuel utilisateur

IBM

IBM INFOPRINT HI-LITE COLOR 4005-HC2 Manuel d'installation et d'exploitation

IBM

IBM INFOPRINT COLOR 1454 Guide de référence

IBM

IBM Network Printer 12 Manuel utilisateur

IBM

IBM color LaserJet 5500 Manuel utilisateur

IBM

IBM 6400-D Generation II Series Manuel utilisateur

IBM

IBM IBM Infoprint 1572 MICR 50 Manuel utilisateur

IBM

IBM 5225 1 Manuel

IBM

IBM 4610 - Kxx Manuel du propriétaire

IBM

IBM Network Printer 12 Fiche technique

IBM

IBM InfoPrint 20 Manuel utilisateur

IBM

IBM INFOPRINT 1116 Manuel de service

IBM

IBM 4247 - Model 001 B/W Dot-matrix Printer Manuel utilisateur

IBM

IBM 1585 (MT 4539) Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur