I3 International Ax32V Series Manuel utilisateur

Quick Start Guide

Network Vandal-Resistant Mini Dome Ax32V Series

• Safety

1. This quick start guide is designed for users who have an adequate

knowledge of network cameras.

2. Do not touch the imaging surface of the sensor. Use a soft cloth moistened

with alcohol to clean the surface if it is touched accidentally.

3. Ensure the power supply voltage is correct for the particular variant of

camera before operation.

4. Do not attempt to service this camera yourself unless you are authorized

to do so. Opening the camera may expose you to electrocution or other

hazards. Refer all servicing to qualified personnel only.

5. For more details on installation and operation, please refer to the CD provided.

• Package Contents

- Camera x1

- Prined Quick Guide x1

- Power Supply x1 (Optional)

- Document CD x1

- Guide Pattern Sticker x1

- Mounting Screws x2

- Allen Key x1

- White color Anchors x2

• Concept of Network Camera

• Camera Installation

1. Adhere the guide sticker to the mounting surface. The marks on the sticker

indicate the placement of the screws. If necessary, pre-drill holes. If mounting on

a cement surface, insert plastic anchors into the holes.

2. Using the Allen key provided, undo the four screws and remove

the outer casing.

3. Fasten the camera to the mounting

surface using the holes in the base

board and two screws.

4. Loosen the lens screws.

5. Adjust the lens’s angle as desired. Tighten the lens screws.

Refasten the outer casing.

NOTE:

-The lens has been factory adjusted for an optimal image. Therefore, only adjust the

camera angle.

i³ iP-Pro Server

Crossover direct connection

LAN VIA a Gigabit Switch

i³ iP-Pro Server

Connection type: 1

Connection type: 2

Network Vandal-Proof Mini Dome

Quick Start Guide

• Connecting the camera to a network

Internet Explorer version 6.0 or higher is necessary to use this

camera.

1. This camera is designed to be used on an Ethernet network. It is

set to use the default IP address 192.0.0.16 If your network sup-

ports DHCP, you will need to enable this feature from the camera

network settings.

2. In order to connect, your PC must be set to the same IP address

range as the camera. This means the two addresses must

match, except for the final set of digits which must be different.

For example, with a camera address of 192.0.0.16, the PC ad-

dress could be 192.0.0.99

a) To change your computer’s IP address, follow these steps:

- in the control panel, go to ‘Network Connections’.

- double-click on ‘Local Area Connection’.

- a new window appears; click on ‘Properties’.

- another window appears; scroll down to ‘Internet Protocol (TCP/

IP)’; make sure it is selected with a check mark, then double

click on it.

- in the window that appears, click ‘Use the following IP address’.

- enter an appropriate address in the IP address field.

- enter 255.255.255.0 into the subnet address field.

- click ‘OK’.

To verify a functioning connection between the camera and PC,

“ping” the camera’s IP address. To do so, under the ‘Start’ menu,

click ‘Run’. In the ‘Open’ field, type cmd. A black command win-

dow appears. Type ping 192.0.0.16 and hit enter. If the mes-

sage ‘Reply from 192.0.0.16’ appears, it means the camera and

computer are connected. Note: Window command should appear.

Reply from 192.0.0.16: bytes=32 time <1ms TTL=64

3. Open Internet Explorer and enter 192.0.0.16 into the address

bar. A pop-up window will require you to login. Enter the default

username: admin and password: 1234 to login.

4. Install the Active X viewer. It is required to monitor H.264, MPEG4

and M-JPEG video modes.

5. Before viewing, you may need to adjust your browser’s security

settings. To do so:

- From the ‘Tool’ menu, click ‘Internet Options’.

- Click on the ‘Security’ tab.

- If the camera is using the intranet, click the ‘Local intranet’ icon. If

the camera is using the internet, click the ‘Internet’ icon.

- Click on ‘Custom level’. Under ‘ActiveX controls and plug-ins’, enable

the following three functions:

‘Download signed ActiveX controls’

‘Run ActiveX control and plug-ins’

‘Script ActiveX controls marked safe for scripting*’

e. Click OK.

Table des matières

Autres manuels i3 International Caméra de sécurité

i3 International

i3 International AM42R Manuel utilisateur

i3 International

i3 International DB78BB Manuel utilisateur

i3 International

i3 International i3B261 Manuel utilisateur

i3 International

i3 International C-AX401C1MN Manuel utilisateur

i3 International

i3 International i3F416U Manuel utilisateur

i3 International

i3 International Ax68R/Ax78R Manuel utilisateur

i3 International

i3 International Ax47R4 Manuel utilisateur

i3 International

i3 International Ax78R Manuel utilisateur

i3 International

i3 International Ax50D Manuel utilisateur

i3 International

i3 International Ax40W2 series Manuel utilisateur

i3 International

i3 International i3F417U Manuel utilisateur

i3 International

i3 International Ax63Z Series Manuel utilisateur

i3 International

i3 International M71 Manuel utilisateur

i3 International

i3 International C-Di210 Manuel utilisateur

i3 International

i3 International Ax61 series Manuel utilisateur

i3 International

i3 International Am52R Manuel utilisateur

i3 International

i3 International Ax45RM series Manuel utilisateur

i3 International

i3 International Ax51B Manuel utilisateur

i3 International

i3 International Ax63Z Series Manuel utilisateur

i3 International

i3 International Ax68R Manuel utilisateur

i3 International

i3 International Am57 Manuel utilisateur

i3 International

i3 International Ax46DC Manuel utilisateur

i3 International

i3 International Ax45RM series Manuel utilisateur

i3 International

i3 International ANNEXXUS Ax41V1MVR Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur

i3 International Ax32V Series Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques