I-Tech BlueBand Manuel utilisateur
www.tuv.com
Test Report No.: 14008928 001 Appendix 4 page 10 of 27
1.6 User Manual
(Cover)
i.Tech BlueBAND
User Guide
(Version 1 – 28-Apr-2005)
www.tuv.com
Test Report No.: 14008928 001 Appendix 4 page 11 of 27
(Page 0)
Contents
i.Tech BlueBAND Overview…..……………..………………………………………2
Getting Started………………..……………..………………………………………3
Charging Your Earphone…………………………………………………………….4-5
Nominal Charging Time…………………………………………………………5
Talk & Standby Time………………………………………………………….5
Low Battery……………………………………………………………………...5
Turning Your Earphone On and Off………………………………………………….6
Pairing Your Earphone..…..………………………………………………………7-8
Using Your Earphone………………………………………………………………9-10
Answering a Call…………………………………………………………………9
Answering a Call when Listening to Stereo Audio………………………………9
Ending a Call……………………………………………………………………..9
Rejecting a Call…………………………………………………………………..9
Dialing from Your Mobile Handset……………………………………………...9
Voice Dialing from Your Earphone………………………………………....10
Last Number Redialing from Your Earphone………………………………10
Listening to Stereo Audio fromYour PC / Device……………………………..10
Adjusting the Volume………………………………………………………………...11
Resetting / Removing the Pairing …………………………………………………...11
Care and Maintenance……………………………………………………………12-13
Safety Information……………………………………………………………………14
Troubleshooting……………………………………………………...……………….15
Product Specifications………………………………………………………………..16
www.tuv.com
Test Report No.: 14008928 001 Appendix 4 page 12 of 27
(Page 1)
i.Tech BlueBAND Overview
Fig. 1 (Right Channel Earphone)
Fig. 2 (Left Channel Earphone)
Getting Started
To use your i.Tech BlueBAND earphone (“Earphone”), please follow these simple steps:
Charge your earphone
Pair your earphone with a Bluetooth-enabled mobile handset or music player
Built-in rechargeable battery
Dual color LED Indicator
Multifunction Button (MFB)
Volume Key (+)
Volume Key (-)
Right Audio Channel
Left Audio Earphone
Charging Socket
A
djustable-pitch Arm
www.tuv.com
Test Report No.: 14008928 001 Appendix 4 page 13 of 27
(Page 2)
Wearing Your i.Tech BlueBAND
Fig. 3 Wearing your Earphone
www.tuv.com
Test Report No.: 14008928 001 Appendix 4 page 14 of 27
Page 3
Charging Your Earphone
Fig. 4
The Earphone comes with a built-in rechargeable battery. Prior to using the headset, it is recommendable to
charge the battery fully for the first time.
www.tuv.com
Test Report No.: 14008928 001 Appendix 4 page 15 of 27
Page 5
Charging Your Earphone
Connect the charger to an AC wall outlet and the charger plug to the headset’s charging socket (fig.4). The LED
will be red while charging.
IMPORTANT Charging indication will be delayed for a few seconds if the headset has not been used for
a long time or the battery is drained.
Nominal Charging Time
Charging the battery fully is normally within 3 hours. When the battery is fully charged, the LED will turn blue
and remains on for 30 minutes. Disconnect the charger from AC wall outlet and the headset. Press and hold the
MFB (fig.1) for 2 seconds to turn the headset on, please refer to “Turning Your Earphone On and Off” on the
next page. For pairing, please refer to “Pairing your earphone”.
Talk & Standby Time
The fully charged battery offers up to 6 hours talk time and up to 150 hours standby time. When no calls are in
progress, the headset remains turned on in standby mode.
Low Battery
When the headset is on and the battery becomes low, the LED flashes red and the headset emits a beep every
1 minute. Please recharge the battery as described above.
www.tuv.com
Test Report No.: 14008928 001 Appendix 4 page 16 of 27
Page 6
Turning Your Earphone On and Off
Turning On the Earphone
Press and hold the MFB for 2 seconds until you hear a short beep. The LED will flash blue.
IMPORTANT Press the MFB again each time you turn on the headset to reactivate pairing so that the
connection between the headset and the mobile handset is resumed. For pairing, please refer to “Pairing
Your Earphone” on page 7-8.
Turning Off the Earphone
Press and hold the MFB for 3 seconds until you hear a long beep. The LED flash stops.
IMPORTANT To disconnect the Bluetooth connection, please firstly turn of your headset by pressing
the MFB key.
www.tuv.com
Test Report No.: 14008928 001 Appendix 4 page 17 of 27
Page 7
Pairing Your Earphone
Prior to using your Earphone for the first time, you must pair it with a Bluetooth-enabled mobile handset or Music
Player (The “Device”).
The information on the next page describes pairing instruction for typical Bluetooth-enabled mobile handset or
music player. Earphone pairing procedure is subject to different models of mobile handsets and music player.
Up to 1 meter
www.tuv.com
Test Report No.: 14008928 001 Appendix 4 page 18 of 27
Page 8
Pairing Your Earphone
1. Place the Earphone and the device where they are easily viewable by no more than 1 meter apart.
2. Ensure the earphone is OFF.
3. Press and hold the MFB until the earphone LED alternately flashes blue and red.
4. Activate your mobile handset’s Bluetooth function by referring to your mobile handset user guide for details.
5. Set the device to search for Bluetooth devices within about 1 meter as instructed in the mobile handset user
guide and select “i.Tech BlueBAND” from the list.
6. Enter the preprogrammed passkey “8888” and press “OK” to pair your earphone and device. When the
pairing is complete, the headset LED will flash blue rapidly for 5 times followed by a long beep.
7. Go back to your device’s main menu. For certain device models, a headset / audio icon will be shown on the
screen. You should now be able to make and receive calls using your earphone and listen stereo music via
your earphone.
IMPORTANT If the pairing cannot be completed within 2 minutes while the pairing mode is activated, the
headset LED flashes purple red with 3 beeps and the headset is turned off. Please repeat Steps 2 to 7 to
pair the headset and the mobile handset again.
www.tuv.com
Test Report No.: 14008928 001 Appendix 4 page 19 of 27
Page 9
Using Your Earphone
Answering a Call
When there is an incoming call, you will hear ringing through the earphone. Press the MFB to accept the call or
answer the call via your mobile handset in the normal way.
Answering a Call when Listening to Stereo Audio
Press the MFB once to answer the call and when finished, press the MFB once to resume stereo audio.
If the other party you are speaking to ends the call, stereo audio will automatically resume without having to
pressing the MFB.
NOTE To receive stereo audio from your mobile handset or PDA, please make sure they support the
Bluetooth A2DP profile.
Ending a Call
Press the MFB to end your call or end the call via your mobile handset in the normal way.
Rejecting a Call
To reject an incoming call during ringing of the headset, press and hold the Volume Key for 2 seconds until you
hear 2 beeps.
Dialing from Your Mobile Handset
Simply make calls on your mobile handset in the normal way.
Table des matières
