HYCON HY16F19X Series Manuel utilisateur
© 2014-2017 HYCON Technology Corp.
www.hycontek.com
APD-HY16IDE009-V03_EN
HY16F19X Series
IDE Hardware User’s Manual
.
HY16F1
9
X Series
IDE Hardware User’s Manual
© 2014-2017 HYCON Technology Corp
www.hycontek.com
APD-HY16IDE009-V03_EN
page2
Table of Contents
1. PACKAGE CONTENTS ............................................................................................................................ 4
2. SAFETY PRECAUTIONS ......................................................................................................................... 5
3. SOFTWARE INSTALLATION REQUIREMENTS ..................................................................................... 6
3.1. IDE Software Installation Requirements ............................................................................................... 6
4. DESCRIPTION OF THE IDE HARDWARE (HY16F MINI LINK) ............................................................. 7
4.1. Schematic architecture description ....................................................................................................... 7
4.2. Mini Link diagram .................................................................................................................................. 7
4.3. Mini Link connection with EDM ............................................................................................................. 8
4.4. Connection Diagram of Mini Link and Target Board (Powered by Mini Link) ....................................... 8
5. HARDWARE TARGET BOARD INTRODUCTION ................................................................................... 9
5.1. Target Board Features .......................................................................................................................... 9
5.2. External Power Supply and Precautions............................................................................................. 10
5.3. Target Board Circuit Diagram .............................................................................................................. 11
6. LCD BOARD INTRODUCTION .............................................................................................................. 12
7. HARDWARE CONNECTION INTRODUCTION ..................................................................................... 13
8. REVISIONS ............................................................................................................................................. 14
.
HY16F1
9
X Series
IDE Hardware User’s Manual
© 2014-2017 HYCON Technology Corp
www.hycontek.com
APD-HY16IDE009-V03_EN
page3
Attention:
1、 HYCON Technology Corp. reserves the right to change the content of this datasheet
without further notice. For most up-to-date information, please constantly visit our
website: http://www.hycontek.com .
2、 HYCON Technology Corp. is not responsible for problems caused by figures or
application circuits narrated herein whose related industrial properties belong to third
parties.
3、 Specifications of any HYCON Technology Corp. products detailed or contained herein
stipulate the performance, characteristics, and functions of the specified products in the
independent state. We does not guarantee of the performance, characteristics, and
functions of the specified products as placed in the customer’s products or equipment.
Constant and sufficient verification and evaluation is highly advised.
4、 Please note the operating conditions of input voltage, output voltage and load current
and ensure the IC internal power consumption does not exceed that of package
tolerance. HYCON Technology Corp. assumes no responsibility for equipment failures
that resulted from using products at values that exceed, even momentarily, rated values
listed in products specifications of HYCON products specified herein.
5、 Notwithstanding this product has built-in ESD protection circuit, please do not exert
excessive static electricity to protection circuit.
6、 Products specified or contained herein cannot be employed in applications which
require extremely high levels of reliability, such as device or equipment affecting the
human body, health/medical equipments, security systems, or any apparatus installed in
aircrafts and other vehicles.
7、 Despite the fact that HYCON Technology Corp. endeavors to enhance product quality
as well as reliability in every possible way, failure or malfunction of semiconductor
products may happen. Hence, users are strongly recommended to comply with safety
design including redundancy and fire-precaution equipments to prevent any accidents
and fires that may follow.
8、 Use of the information described herein for other purposes and/or reproduction or
copying without the permission of HYCON Technology Corp. is strictly prohibited.
.
HY16F1
9
X Series
IDE Hardware User’s Manual
© 2014-2017 HYCON Technology Corp
www.hycontek.com
APD-HY16IDE009-V03_EN
page4
1. Package Contents
HY16F19X IDE Hardware development kit includes HY16F Mini Link and
HY16F198B-L100 Target Board.
Integrated Hardware development kit helps to develop MCU application program of HY16F
Series. Program compiling, hardware debug, IC programming was implemented through
NB/PC end connection.
Serial number Name Spec Quantity
HY16F19X-DK04
1. HY16F198B-L100 Target
Board HY16F19X-IM02 1
2. HY16F Mini Link debug tool
HY16000-CM04 1
3. USB cable USB Type A to Mini B
Cable 1
4. EDM line 5pin to 4x2pin (2.54mm)
1
.
HY16F1
9
X Series
IDE Hardware User’s Manual
© 2014-2017 HYCON Technology Corp
www.hycontek.com
APD-HY16IDE009-V03_EN
page5
2. Safety Precautions
Do not place heavy objects on the display panel, in order to avoid damage caused by
stress.
Place the application display boards at steady place, so as to avoid falling damage.
Do not use this product with the input voltage which is not meeting the electrical
specifications, , in order to avoid working abnormally or damage
Avoid application display boards being touched by liquid, dirt and avoid being exposed
to moisture during operation. This application should be kept in a dry environment, so
as not to affect the function and performance
Remove the power supply when not using it.
When following status occurred, please remove the power supply immediately, and
contact our engineer.
Power Supply line is worn or damaged.
Power source (battery) connected but no any light on while operating.
Component off.
.
HY16F1
9
X Series
IDE Hardware User’s Manual
© 2014-2017 HYCON Technology Corp
www.hycontek.com
APD-HY16IDE009-V03_EN
page6
3. Software Installation Requirements
3.1. IDE Software Installation Requirements
Minimum System Requirements of operating AndeSight RDS:
(1) PC/NB hardware requirement:
IBM PC compatible X86 system CPU
4GB Memory
8GB Hard disk
(2) Product number support:
HY16F19X Series
(3) Hardware model support:
HY16F19X development tools, HY16F19X-DK04.
(4) Software version support:
AndeSight V2.1.1 RDSp3 version above
Device => HY16F_RDSp3_DeviceV0.1
Mini Link Version information => Andes AICE-MINI v1.0.1
(5) Operating system support:
Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10
(6) Apply the following interface modes:
USB Port
.
HY16F1
9
X Series
IDE Hardware User’s Manual
© 2014-2017 HYCON Technology Corp
www.hycontek.com
APD-HY16IDE009-V03_EN
page7
4. Description of the IDE hardware (HY16F Mini Link)
4.1. Schematic architecture description
HY16F Mini Link (AICE) for the HY16F198B-L100 Target Board and PC / NB end, the
middle connection device. Mainly used as a Programming program and Debug mode.
AndeSight
RDS S/W
USB2.0 EDM line
HY16F19X
Target Board
PC/NB
EDM
ICE
Note: EDM (Embedded debug module)
4.2. Mini Link diagram
Pin Name Description
RST Reset Pin
VDD The VDD pin of the Mini Link is fixed to provide 3.3V, And to provide IC
(HY16F198B-L100) power directly from the Target Board EDM Pin7.
ECK EDM Clock Pin
EDIO EDM Data Input / Output Pin
VSS Ground Pin
.
HY16F1
9
X Series
IDE Hardware User’s Manual
© 2014-2017 HYCON Technology Corp
www.hycontek.com
APD-HY16IDE009-V03_EN
page8
Mini Link LED Description:
POWER LED (Green LED): When the USB Port connection, POWER LED will
continue to light.
ACTIVE LED (Yellow LED): When enter Debug Mode, ACTIVE LED will flash
continuously.
ERROR LED (Red LED): When the USB Port is connected but the Target Board is not
connected, the Error LED is on.
4.3. Mini Link connection with EDM
HY16F
Mini Link
EDM line
Target Board EDM
1
2
RST (Blue)-> Target board EDM Pin2
VDD (Red)-> Target board EDM Pin7
ECK(Green)-> Target board EDM Pin6
EDIO(Yellow)-> Target board EDM Pin4
VSS(Black)-> Target board EDM Pin3,5
4.4. Connection Diagram of Mini Link and Target Board (Powered by Mini Link)
Step1: The EDM Line connection Mini Link and Target Board.
Step2: Connect the PC's USB Port to the Mini Link.
Step3: The Power LED is on.
.
HY16F1
9
X Series
IDE Hardware User’s Manual
© 2014-2017 HYCON Technology Corp
www.hycontek.com
APD-HY16IDE009-V03_EN
page9
5. Hardware Target Board Introduction
10. 4com x 17seg
LCD Panel
11. HY16F198B-L100
13. Bridge Sensor
Connector
12. S25FL040A
SPI Flash
14. Tack Switch x 2
2. Power Management
9. Touch Key PAD x 4
3. EDM port for Mini Link
4. MCU Reset Switch
5. Writer Connector(5pin)
6. External HSXT 4MHz
and LSXT 32768Hz
7. 24C02 EEPROM
8. 4 wires SPI Connector
1. Power LED
5.1. Target Board Features
No. Name Description
1 Power LED When the Target Board is powered normally, the
Power LED is on
2 Power Management External power supply voltage regulator circuit
(see section 5.2)
3 EDM Port Connection Mini Link
(See Section 4.3 ICE Connection for details)
4 MCU Reset Switch Reset MCU is used
5 Writer Connector Programming IC use
6 External HSXT
and LSXT External HSXT (4MHz) & LSXT (32768Hz)
7 24C02 EEPROM With 2K EEPROM for I2C interface
8 SPI Connector 4 wires SPI Interface
9 Touch key PAD 4 Touch key
10 4Com*17Seg
LCD Panel See Chapter 6 for details
11 HY16F198B-L100 HY16F198B LQFP100 MCU
12 S25FL040A With the SPI interface using Flash Memory (4M bit)
.
HY16F1
9
X Series
IDE Hardware User’s Manual
© 2014-2017 HYCON Technology Corp
www.hycontek.com
APD-HY16IDE009-V03_EN
page10
13 Bridge Sensor
Connector ADC Input Pin A0 & A1
14 Tack Switch*2 S2 and S3 are Tack Switches
5.2. External Power Supply and Precautions
Use an external power supply method (Through the Power Management will power
regulator into 3V, and then provided to HY16F198B IC)
5.2.1. Use an external power supply step
Step1: Remove the EDM Line
Step2: By JP8 (+), JP9 (-) to provide external power supply.
(Input range VDD~9.0V)
Step3: Press S4 switch (External power switch) Through the Power Management will
power regulator into 3V, and then provided to HY16F198B IC
Precautions:
Because Mini Link supplied power = 3.3V, so when want to use an external power
supply, be sure to remove EDM line, avoid voltage different voltages caused conflict.
.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels HYCON Matériel informatique
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
