HunterDouglas Powerview Gen 2 Manuel utilisateur
Powerview® Quick Start Guide Gen 2
This guide will help getting you started with your Powerview® purchase.
Step 1. Install your shades
Make sure you have properly installed your shades and that they are connected to a power source (battery pack or power
supply).
Step 2. Your Powerview® components
Packed with your purchased product you will nd one or more remotes, repeaters and a Hub (which is optional and only
required when you want to control your shades using a tablet or smartphone). Remotes come in different colours. Please
locate them all before you start.
Step 3. Pairing remotes
In case no remotes are used or you want to start the setup process using the PowerView® Hub & App, please proceed to
step 5
.
Battery pack Power supply
Pebble remote Surface remote Repeater Hub
MANUAL
Page 1 of 23 version: 1.1
By pairing PowerView® remotes you make all your remotes part of the same PowerView® Network. This is important for
seamless installation of the PowerView® system.
Note
If you only have one remote, please proceed to
step 4
.
3.1 Take all remotes.
Name one remote "SOURCE"
Name the rest of the remotes "TARGET"
Repeat the following steps until all "TARGET" remotes
have been set.
3.2 On the back of the target remote , Press the reset
button for six seconds.
The group buttons will ash 3x after 6 seconds to
conrm.
3.3 On the source remote , Press stop for 6 seconds.
Keep pressing until the remote lights start blinking.
3.4 On the target remote , Press and hold the stop
button.
MANUAL
Page 2 of 23 version: 1.1
Step 4. Adding a shade to a remote
A Remote can control 6 groups of shades (buttons 1 to 6). The instructions below assign a shade to
group 1 .
Depending on your preference you can choose your own group.
3.5 On the source remote , Press and release the
stop button.
As a conrmation, the group buttons on the target
remote will ash 2x.
3.6 If the buttons on the source remote are still ashing
Press stop for 6 seconds.
Keep pressing until the remote lights stop blinking.
4.1 Locate the manual control button on your shade.
MANUAL
Page 3 of 23 version: 1.1
Roller blind Roller blind 230V Twist® Roller Blind
EOS Bottom-Up blind CHR Bottom-Up blind CHR Top-Down Bottom-Up blind
Vertical Venetian blind Venetian blind Roman shade
4.2 Press and hold the stop button for 6 seconds.
Keep pressing until the remote lights start blinking.
MANUAL
Page 4 of 23 version: 1.1
Step 5. Connect and setup the Hub
4.7 Press and hold the stop button for 6 seconds.
Keep pressing until the remote lights stop blinking.
The remote will exit programming mode
automatically after 20 seconds.
5.1 Download the Powerview® App from the Apple App store or Google Play store on your mobile
device.
5.2 Connect the Hub with the ethernet cable to your
home network router .
Put the ethernet cable into an empty LAN port.
Do not use the WAN port!
After Hub setup has nished, you can wirelessly connect your Hub to your WiFi network.
Open Menu > Select your Hub > Select the info button > Select Hub Wi-Fi Set Up and follow the
wizard.
MANUAL
Page 6 of 23 version: 1.1
5.4 Watch out for the colour of the LED.
The Hub is ready to be discovered within the App when the LED is Blinking Amber
5.5 Open the app and select Connect to Hub .
The app will start looking for an available Hub.
Make sure your mobile device and the PowerView® Hub are
connected to the same home network.
5.6 When your Hub has been discovered, select Set Up to start
conguring the Hub.
MANUAL
Page 8 of 23 version: 1.1
5.7 Select New Setup .
Note 1
If you already have a Gen 1 Hub installed in your
PowerView® network, select Migrate from an Existing
Hub and follow the in App instructions to Transfer Gen 1
Hub data to the new Gen 2 Hub.
Note 2
If you already have a Gen 2 Hub installed in your
PowerView® network and created a Hub backup, select
Set Up from Hub Backup and follow the onscreen
instructions.
5.8 Enter a Hub Name and press Next .
MANUAL
Page 9 of 23 version: 1.1
5.9 Select Pair with PowerView® Remotes .
5.10 Choose 1remote.
In this quick start guide we select one remote, regardless of the
amount of remotes you have.
5.11 Follow the onscreen instructions to add the Hub to
your Powerview® network.
The Hub is added when the LED is Solid Blue
MANUAL
Page 10 of 23 version: 1.1
Table des matières
Autres manuels HunterDouglas Changer
HunterDouglas
HunterDouglas Platinum Technology Manuel utilisateur
HunterDouglas
HunterDouglas PowerView Manuel utilisateur
HunterDouglas
HunterDouglas PowerView Hub 2.0 Manuel utilisateur
HunterDouglas
HunterDouglas DecoFlex Wirefree RTS Manuel utilisateur
HunterDouglas
HunterDouglas PowerView Manuel utilisateur
