Huawei OptiXstar HG8145X6-10 Manuel utilisateur

Huawei OptiXstar HG8145X6-10

Quick Start for QR code

Issue 01

Date 2023-04-14

HUAWEI TECHNOLOGIES CO., LTD.

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and

the customer. All or part of the products, services and features described in this document may not be

within the purchase scope or the usage scope. Unless otherwise specied in the contract, all statements,

information, and recommendations in this document are provided "AS IS" without warranties, guarantees

or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every eort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: https://www.huawei.com

Email: [email protected]

Contents

1 Placing the Device................................................................................................................... 1

2 Connecting Cables................................................................................................................... 4

3 Indicator Description.............................................................................................................. 6

4 Technical Specications......................................................................................................... 8

5 FAQs............................................................................................................................................ 9

Huawei OptiXstar HG8145X6-10

Quick Start for QR code Contents

1 Placing the Device

NO TE

● Do not install the ONT outdoors or in an outdoor cabinet.

● The ONT can be mounted onto a wall or placed on a desk. Do not install the ONT in

other modes, such as ceiling.

● Keep 10 cm clearance on all sides to ensure adequate ventilation.

● It is recommended that the computer and ONT be put far away from electric appliances

that generate strong magnetic or electric elds, such as microwave ovens.

Mounting an ONT on the desk

The gure below shows an ONT that is horizontally placed on a desk.

Huawei OptiXstar HG8145X6-10

Quick Start for QR code 1 Placing the Device

NO TE

The appearance shown in this document may be dierent from the actual appearance of

the product. The actual product prevails.

Mounting an ONT onto the wall

1. Mark two positions with the same spacing as that between the two mounting

holes of the ONT using a marker on a wall.

2. Select a proper drill bit according to the outer diameter of the screws. Use a

hammer drill to drill the marked positions on the wall. Then clean the holes

and install two expansion bolts.

3. Use a screwdriver to fasten the screws into the expansion bolts, reserving 5

mm ends out of the wall, and mount the ONT onto the screws.

Huawei OptiXstar HG8145X6-10

Quick Start for QR code 1 Placing the Device

NO TE

It is recommended that the screw be about 4 mm in diameter and longer than 20 mm. The

screw head should be between 6mm and 9mm in diameter.

Huawei OptiXstar HG8145X6-10

Quick Start for QR code 1 Placing the Device

2 Connecting Cables

Huawei OptiXstar HG8145X6-10

Quick Start for QR code 2 Connecting Cables

NO TE

● The ber connector connected to the optical port on the wall varies depending on

actual conditions.

● To ensure normal use of bers, make sure that the ber bending radius is larger than 30

mm.

No. Item Description

1On/O Powers the ONT on or o.

2 Power Connects to a power adapter.

3 USB Connects to USB storage devices.

4 TEL Connects to the ports on a telephone or fax machine.

5 LAN1-LAN4 Connects to PCs or IP set-top boxes (STBs).

6 Reset Press the button for a short time to reset the device, or

press the button for a long time (longer than 10s) to

restore the device to the default settings and reset the

device.

NOTE

Reset Huawei ONTs with caution. Otherwise, the ONTs may

fail to access the Internet. If an ONT cannot access the

Internet after a reset, contact your Internet service provider.

7 WLAN Used to enable or disable the WLAN function.

● When the WLAN is o, press the WLAN button (>

3s) and release the button to open the WLAN.

● When the WLAN is on, press the WLAN button (>

3s) and release the button to close the WLAN.

8 WPS When the WLAN is on, press the WPS button (> 3s) and

release the button to start Wi-Fi protected setup (WPS)

negotiation.

9 Optical port The optical port is equipped with a rubber plug and

connected to a ber for upstream transmission.

The type of the optical connector connected to the

optical port can be SC/APC.

Huawei OptiXstar HG8145X6-10

Quick Start for QR code 2 Connecting Cables

3 Indicator Description

Indicator Status Description

Power Steady on The ONT is powered on.

O The power supply is cut o.

PON/LOS See the following table.

LAN1-

LAN4

Steady on The Ethernet connection is in the normal state.

Blinking Data is being transmitted on the Ethernet port.

O The Ethernet connection is not set up.

TEL Steady on The ONT is registered with the softswitch but no

service ows are transmitted.

Blinks twice a

second

The ONT is registered with the softswitch, and

data is being transmitted on the port.

Blinks once

every 2

seconds

The ONT fails to be registered with the softswitch.

O The POTS port is disabled.

USB Steady on The USB port is connected and working in the

host mode, but no data is transmitted.

Blinking Data is being transmitted on the USB port.

O The system is not powered on or the USB port is

not connected.

WLAN Steady on The WLAN function is enabled.

Blinking Data is being transmitted on the WLAN port.

Huawei OptiXstar HG8145X6-10

Quick Start for QR code 3 Indicator Description

Indicator Status Description

O The WLAN function is disabled.

WPS Steady on The WPS function is enabled.

Blinking A Wi-Fi terminal is accessing the system.

O The WPS function is disabled.

Status

No.

PON Status LOS Status Description

1O O The ONT is prohibited by the upper-layer

device or blinks abnormally. Contact the

service provider for help.

2 Blinks twice

a second

Blinks twice

a second

3 Blinks twice

a second

O The ONT attempts to set up a connection

with its upper-layer device.

4 Steady on O A connection is set up between the ONT

and its upper-layer device.

5O Blinks once

every 2

seconds

The ONT is not connected to bers or

does not receive optical signals.

6 Blinks once

every 2

seconds

Blinks once

every 2

seconds

The hardware is faulty.

NO TE

If the ONT is not powered on or the power switch is turned o, all indicators are o.

Huawei OptiXstar HG8145X6-10

Quick Start for QR code 3 Indicator Description

Table des matières

Autres manuels Huawei Routeur réseau

Huawei

Huawei Wi-Fi WALKER WiMAX 2+ HWD14 Guide de démarrage rapide

Huawei

Huawei B311As-853 Caractéristiques techniques

Huawei

Huawei EchoLife HG8247H Guide de configuration

Huawei

Huawei Quidway S9300 Manuel utilisateur

Huawei

Huawei AR1200 Series Manuel utilisateur

Huawei

Huawei EchoLife HG8245 Manuel utilisateur

Huawei

Huawei E5783-230a Caractéristiques techniques

Huawei

Huawei SmartAX MT880a Manuel utilisateur

Huawei

Huawei Quidway NetEngine80E Manuel utilisateur

Huawei

Huawei EG8247Q Manuel utilisateur

Huawei

Huawei SmartAX MT882 Manuel utilisateur

Huawei

Huawei LTE CPE E5172 Manuel utilisateur

Huawei

Huawei Quidway NetEngine40E Mode d’emploi

Huawei

Huawei LTE CPE B593 Manuel utilisateur

Huawei

Huawei V200R001 Caractéristiques techniques

Huawei

Huawei Quidway S1700-24-AC Manuel utilisateur

Huawei

Huawei AR150 series Manuel utilisateur

Huawei

Huawei SUN2000-M5 Series Manuel utilisateur

Huawei

Huawei Quidway AR 46 Series Manuel utilisateur

Huawei

Huawei E5170s-22 Manuel utilisateur

Huawei

Huawei NE20E-S8 Guide rapide

Huawei

Huawei OptiXstar EG8010Hv6-10 Manuel utilisateur

Huawei

Huawei B315S-607 Manuel utilisateur

Huawei

Huawei Baudcom EG8145V5 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité