Huawei CR52-MPUA Manuel utilisateur

Quidway® NetEngine 80E Core Router Main Processing Unit

http://www.huawei.com/products/datacomm/ 1

Quidway® NetEngine 80E Core Router

Main Processing Unit

Overview

Main Processing Unit (MPU) is the core of the Quidway®NetEngine 80E core router (“NE80E”

hereinafter).

The NE80E provides 22 slots in total, two of which are reserved for the MPU. MPU supports hot

swapping. It is suggested that you configure two MPUs in order to implement MPU redundancy and

enhance the system reliability. Each MPU needs to be configured with one or two Compact Flash

(CF) cards (512MB) and memory (1GB). It is suggested to configure two CF cards and memory for

improving the system performance.

CR52-MPUA

MPU is integrated with the clock module, LAN Switch module and CF card. As the core of system

control and management, MPU also serves as system clock source and maintenance and

management unit. It implements the functions of control and system maintenance planes.

The detailed functions are as follows:

zExecute routing protocols:

All routing protocol packets are sent by the forwarding engine to MPU for processing. The MPU

updates routing entries and load forwarding tables to the forwarding engine. In addition, the

MPU also is responsible to broadcast and filter routing packets and download routing policies

from the policy server.

zExecute the signaling protocols.

zProvide out-of-band channels for the communication between boards.

This function is attributed to the LAN Switch module and aimed to control, maintain and

exchange information between MPU, Switching Fabric Unit (SFU) and Line Processing Unit

(LPU).

zProvide level-3 clock and the reference clock of the switching network.

It provides service and interface boards with high-precision and high-reliability SDH clock

Quidway® NetEngine 80E Core Router Main Processing Unit

http://www.huawei.com/products/datacomm/ 2

signals (38.388MHz). The clock module sends 2-channel 2.048MHz or 2.048Mbit/s

synchronization clock signals to lower-level equipment as it receives the 2.048MHz or

2.048Mbit/s clock reference.

zMonitor the running status of the system.

MPU collects the running data of units periodically and generates the control information,

including detecting whether boards are in position, controlling the running status of the

switching network and speeding up fans.

zManage and maintain equipment.

zConfigure data:

MPU is a storage place for system configuration data, boot files, billing information, upgraded

software and system running logs. Providing an interface for the CF card, MPU also functions

as a storage device to store data files.

zEnsure reliability:

MPU works in the 1+1 backup mode. Active and standby MPUs monitor each other. The

standby MPU takes over services when the active one gets faulty. MPU, clock module and LAN

Switch module are all designed with 1+1 hot backup, which enhances the system reliability.

Specifications

Currently the NE80E provides one type of MPU: CR52-MPUA. CR52-MPUA provides multiple

external interfaces whose specification and functions are described in the table below.

Module Name Interface

Name Interface type Description

ETH0 port RJ45

Used to connect the system

Network Management workstation.

It is 10/100/1000M adaptive and

supports a maximum transmission

distance of 100m. It provides LINK

and ACT indicators.

ETH1 port RJ45

Used for interconnection of multiple

chassis but currently reserved. It is

10/100M adaptive and supports a

maximum transmission distance of

100m. It provides LINK and ACT

indicators.

CR52-MPUA

Console port RJ45 RS-232 level; used to connect the

console and implement on-site

configuration of the system.

Quidway® NetEngine 80E Core Router Main Processing Unit

http://www.huawei.com/products/datacomm/ 3

Module Name Interface

Name Interface type Description

AUX port RJ45 RS-232 level; used to connect the

Modem and implement remote

maintenance through dialing.

CF interface TYPE II standard

(compatible with

TYPE I standard)

Used to hold the CF card to save

data files. Standard configuration:

512MB

CLK-IN1

CLK-IN2 SMB Used to connect the external

2.048MHz or 2.048Mbps clock input.

CLK-OUT1

CLK-OUT2 SMB Used to output the 2.048MHz or

2.048Mbps clock to the downstream

equipment.

Autres manuels Huawei Matériel réseau

Huawei

Huawei CX600-X1-M Series Mode d’emploi

Huawei

Huawei NE-FIC-ATM-E3 Manuel utilisateur

Huawei

Huawei E5785-320a Caractéristiques techniques

Huawei

Huawei RTN 380e V100R007 Manuel utilisateur

Huawei

Huawei CR52-10GE Manuel utilisateur

Huawei

Huawei Airbridge BTS3606C Caractéristiques techniques

Huawei

Huawei NE-HIC-2xFE Manuel utilisateur

Huawei

Huawei EchoLife HG8247H Manuel de l'opérateur

Huawei

Huawei SmartAX MA5616 Manuel utilisateur

Huawei

Huawei OptiX OSN 8800 T64 Manuel utilisateur

Huawei

Huawei CR52-MPUA Manuel utilisateur

Huawei

Huawei CR-E4GC Manuel utilisateur

Huawei

Huawei EN83CTLC Manuel utilisateur

Huawei

Huawei RT-8LS Manuel utilisateur

Huawei

Huawei LSBM1SRP Manuel utilisateur

Huawei

Huawei SUN2000P-375 W Manuel utilisateur

Huawei

Huawei OptiX RTN 950A Manuel utilisateur

Huawei

Huawei OptiX RTN 600 ODU Manuel utilisateur

Huawei

Huawei OptiXstar V183 Manuel utilisateur

Huawei

Huawei Lampsite RHUB3908 Manuel d'utilisation

Huawei

Huawei RT-NE20E-NPU Manuel utilisateur

Huawei

Huawei 21501043-003 Manuel utilisateur

Huawei

Huawei FusionPower6000 3.0 Manuel utilisateur

Huawei

Huawei V600R019C00 Caractéristiques techniques

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur