Huawei HG8245W5 Manuel utilisateur

HG8245W5

Quick Start

Issue 04

Date 2020-09-10

HUAWEI TECHNOLOGIES CO., LTD.

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and

the customer. All or part of the products, services and features described in this document may not be

within the purchase scope or the usage scope. Unless otherwise specied in the contract, all statements,

information, and recommendations in this document are provided "AS IS" without warranties, guarantees

or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every eort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: https://www.huawei.com

Email: [email protected]

Contents

1 Placing the Device................................................................................................................... 1

2 Connecting Cables................................................................................................................... 3

3 Indicator Description.............................................................................................................. 5

4 Technical Specications......................................................................................................... 7

5 FAQs............................................................................................................................................ 8

HG8245W5

Quick Start Contents

1 Placing the Device

NO TE

● Do not install the ONT outdoors or in an outdoor cabinet.

● The ONT can be mounted onto a wall or placed on a desk. Do not install the ONT in

other modes, such as ceiling.

● Keep 10 cm clearance on all sides to ensure adequate ventilation.

● It is recommended that the computer and ONT be put far away from electric appliances

that generate strong magnetic or electric elds, such as microwave ovens.

Mounting an ONT on the desk

The gure below shows an ONT that is horizontally placed on a desk.

HG8245W5

Quick Start 1 Placing the Device

NO TE

The appearance shown in this document may be dierent from the actual appearance of

the product. The actual product prevails.

Mounting an ONT onto the wall

1. Mark two positions with the same spacing as that between the two mounting

holes of the ONT using a marker on a wall.

2. Select a proper drill bit according to the outer diameter of the screws. Use a

hammer drill to drill the marked positions on the wall. Then clean the holes

and install two expansion bolts.

3. Use a screwdriver to fasten the screws into the expansion bolts, reserving 5

mm ends out of the wall, and mount the ONT onto the screws.

NO TE

It is recommended that the screw be about 4 mm in diameter and longer than 20 mm.

HG8245W5

Quick Start 1 Placing the Device

2 Connecting Cables

NO TE

● The ber connector connected to the optical port on the wall varies depending on

actual conditions.

● To ensure normal use of bers, make sure that the ber bending radius is larger than 30

mm.

HG8245W5

Quick Start 2 Connecting Cables

No. Item Description

1On/O Powers the ONT on or o.

2 Power Connects to a power adapter.

3 TEL1-

TEL2

Connects to the ports on a telephone or fax machine.

4 LAN1-

LAN4

Connects to PCs or IP set-top boxes (STBs).

5 USB Connects to USB storage devices.

6 Reset Press the button for a short time to reset the device; or

press the button for a long time (longer than 10s) to

restore the device to the default settings and reset the

device.

NOTE

Reset Huawei ONTs with caution. Otherwise, the ONTs may fail to

access the Internet. If an ONT cannot access the Internet after a

reset, contact your Internet service provider.

7 Optical

port

The optical port is equipped with a rubber plug and

connected to a ber for upstream transmission.

The type of the optical connector connected to the optical

port can be SC/APC.

8 WPS/

WLAN

● When the wireless function (WLAN) is enabled, press

the WPS/WLAN switch for 1s to 5s to start Wi-Fi

protected setup (WPS) negotiation.

● When the wireless function (WLAN) is enabled, press

and hold the button WPS/WLAN switch for more than

5s to turn o the wireless function (WLAN).

● When the wireless function (WLAN) is disabled, tap the

WPS/WLAN switch for more than 1s to turn on the

wireless function (WLAN).

NOTE

If the WLAN indicator is steady on or blinks, the wireless

function is enabled. If the WLAN indicator is o, the wireless

function is disabled.

HG8245W5

Quick Start 2 Connecting Cables

3 Indicator Description

Indicator Status Description

Power Steady on The ONT is powered on.

O The power supply is cut o.

PON/LOS See the following table .

LAN1-

LAN4

Steady on The Ethernet connection is in the normal state.

Blinking Data is being transmitted over the Ethernet port.

O The Ethernet connection is not set up.

TEL1-

TEL2

Steady on The ONT is registered with the softswitch but no

service ows are transmitted.

Blinks twice a

second

The ONT is registered with the softswitch, and data

is being transmitted on the port.

Blinks once

every 2

seconds

The ONT fails to be registered with the softswitch.

O The POTS port is disabled.

USB Steady on The USB port is connected and working in the host

mode, but no data is transmitted.

Blinking Data is being transmitted on the USB port.

O The system is not powered on or the USB port is

not connected.

WLAN Steady on The WLAN function is enabled.

Blinking Data is being transmitted over the WLAN port.

HG8245W5

Quick Start 3 Indicator Description

Indicator Status Description

O The WLAN function is disabled.

WPS Steady on The WPS function is enabled.

Blinking A Wi-Fi terminal is accessing the system.

O The WPS function is disabled.

Status

No.

PON

Status

LOS

Status

Description

1O O The ONT is prohibited by the upper-layer

device or blinks abnormally. Contact the

service provider for help.

2 Blinks

twice a

second

Blinks

twice a

second

3 Blinks

twice a

second

O The ONT attempts to set up a connection

with its upper-layer device.

4 Steady on O A connection is set up between the ONT and

its upper-layer device.

5O Blinks

once

every 2

seconds

The ONT is not connected to bers or does

not receive optical signals.

6 Blinks once

every 2

seconds

Blinks

once

every 2

seconds

The hardware is faulty.

HG8245W5

Quick Start 3 Indicator Description

4 Technical Specications

Product Function

HG8245W5 ● 4 Ethernet ports

● 2 POTS ports

● 1 USB port

● 2.4 GHz & 5 GHz Wi-Fi

● Power adapter input: See the nameplate on the adapter.

● System power supply: See the nameplate on the device.

● Ambient temperature: 0ºC to +40ºC

● Ambient humidity: 5%–95% (non-condensing)

● Dimensions (H x W x D): 32 mm x 200 mm x 127 mm (without external

antenna and pads)

● Weight: About 360g

● Maximum system power consumption: 18 W

HG8245W5

Quick Start 4 Technical Specications

Table des matières

Autres manuels Huawei Matériel réseau

Huawei

Huawei RT-FIC-16LS Manuel utilisateur

Huawei

Huawei iSitePower-M Manuel utilisateur

Huawei

Huawei ME60 Series Mode d’emploi

Huawei

Huawei RT-1E1 Manuel utilisateur

Huawei

Huawei LSBM1FP20B0 Manuel utilisateur

Huawei

Huawei NE-HIC-2xFE Manuel utilisateur

Huawei

Huawei RRU3942 Manuel utilisateur

Huawei

Huawei SUN600-5KTL-L0 Manuel utilisateur

Huawei

Huawei EchoLife EG8143H5 Manuel utilisateur

Huawei

Huawei EMUA Series Manuel utilisateur

Huawei

Huawei PDU8000 Series Manuel utilisateur

Huawei

Huawei RRU3203 Manuel utilisateur

Huawei

Huawei OptiX PTN 3900 Manuel utilisateur

Huawei

Huawei EchoLife HS8245W1 Manuel utilisateur

Huawei

Huawei Lampsite RHUB3908 Manuel d'utilisation

Huawei

Huawei PDU8000 Series Manuel utilisateur

Huawei

Huawei EchoLife HG8247H Manuel de l'opérateur

Huawei

Huawei SUN2000-M3 Manuel utilisateur

Huawei

Huawei FusionModule 500 Manuel utilisateur

Huawei

Huawei iMaster NetEco V600R021C10 Manuel utilisateur

Huawei

Huawei OptiX OSN 9560 Manuel utilisateur

Huawei

Huawei SmartLi 1.0 Manuel utilisateur

Huawei

Huawei OptiXstar EN8245X6s-8N Manuel utilisateur

Huawei

Huawei RRU3908 V2 Mode d’emploi

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur