Huawei USG6310 Manuel utilisateur
Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved.
All other trademarks and trade names mentioned in this document are the
property of their respective holders.
HUAWEI USG6310/6320 Unified Security Gateway
V100R001
Quick Start
Issue: 04
Part Number: 31507267
Date: 2015-06-18
1
Thank you for using Huawei USG6310/6320 products. This USG product series protects your network against Internet
threats. This Quick Start shows the product appearance and provides the essential information required for installing the
device and setting up Internet access. For detailed hardware description and installation guidelines, refer to the
Hardware
Guide
. For detailed configurations, refer to the
Administrator Guide
.
Safety Precautions
Be aware of the following safety precautions when installing the device.
•Deactivatepowerwheneverpossiblebeforeperformingmaintenanceonpowercables.
•Alwayswearaproperly-groundedwriststrapbeforetouchingthedeviceorexpansioncardsinit.
Device and Accessories
Your product package includes the following items:
PWR SYS ALM USB
Secospace USG6000
1 3 5 7
0 2
ETH
4 6
Secospace USG6000
0 2 4 6
1 3 5 7
RST 12V ; 3A
CONSOLE
XXXXXXXXXXXXXXXXXXXXXXXXXXX
Console port
Protection ground
terminal
Power
PGND cable
Power Cable
retention clip
Quick start
M4 screw M6 screw
Rack-mounting ears
AC power cable 36W power adapter
Reset button
USBPort indicatorsIndicators
Rubber feet
Equipment
Serial Number
10/100/1000M autosensing
Ethernet electrical interface
•The rack-mounting ear is optional.
•AC power cables vary by country or area, and the AC power cable in the figure is used for reference only.
Cabling
1. Connect the ground terminal on the device to the ground bar using a PGND cable.
2. Connect the device to the WAN and LAN through Ethernet ports (GE0/0/4 and GE0/0/6 in this example, respectively).
3. Connect the device' interface GE0/0/0 to a PC where the NMS client is installed using a network cable.
4. Insert the cable retention clip into the hole close to the power socket. Connect the AC power cable to power adapter, and
insert the 4-pin self-locking plug of the power adapter into the power socket on the device. Then round the clip over the
power cable and fix it using the clip. Insert the AC power cable plug into the power supply socket.
AsUSGdoesnotprovideapowerswitch,itstartsupimmediatelyafterreceivingpower.WhentheSYSindicator
ontheSPUApanelisblinking(onceeverytwoseconds),thedeviceisrunningandreadyforconfiguration.
2
Secospace USG6000
0 2 4 6
1 3 5 7
RST 12V ; 3A
CONSOLE
XXXXXXXXXXXXXXXXXXXXXXXXXXX
Administrator
Intranet
Rear panel
Switch
GE0/0/4 GE0/0/6GE0/0/0
344
4
1
2 2
Default Configuration
The following table lists the default configuration.
Item Description
GE0/0/0 The IP address is 192.168.0.1.
Administrator account/password You can use the default account/password (admin/Admin@123) to log in through web or
console.
Connecting to the Internet
Collect the information in the following table based on the WAN mode you use and the IP address plan for the LAN. The un-
derlined red texts in the table are examples for reference only.
Item Port Description
WAN GE0/0/4 WAN Mode Static IP IP Address: 1.1.1.1 Request your ISP or
network administrator
to provide the data.
Subnet Mask: 255.255.255.0
Default Gateway: 1.1.1.254
Primary DNS: 2.2.2.2
(Optional) Secondary DNS: 2.2.3.3
PPPoE User name/Password: user/Password123
DHCP -The device functions
as a DHCP client.
LAN GE0/0/6 IP Address: 10.0.0.1
Subnet Mask: 255.255.255.0
The LAN IP address range
shall be pre-determined.
DHCP server IP address range: 10.0.0.1 to 10.0.0.254
1. Set the IP address to 192.168.0.2 (or any other in the range of 192.168.0.2 to 192.168.0.254) and subnet mask to
255.255.255.0 of the corresponding network interface on the administration PC.
2. Open a web browser and navigate to https://192.168.0.1:8443.
3. Enter the user name (admin) and password (Admin@123) in the login dialog box, and then click Login. You need to
change the user password as instructed after the first login.
4. In the Startup Wizard page that is displayed, click Next to access the Basic Configuration page. Change the device
name and click Next.
IftheStartup Wizardpageisnotdisplayed,clicktheSystemtabandchooseWizard>Startup Wizardinthe
navigationtree.
3
5. In the Time Settings step, configure the system clock of the device according to your local time zone, and click Next.
6. In the WAN Mode step, select a WAN mode and click Next.
7. In the WAN Settings step, set the parameters and click Next.
8. In the LAN Settings step, set the parameters and click Next.
9. (Optional) In the LAN DHCP Settings step, set the parameters and click Next.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base Bantian Longgang
Shenzhen 518129
People's Republic of China
enterprise.huawei.com
4
10. In the Summary step, confirm the previous settings and click Apply.
11. Click Finish in the Startup Wizard Complete page to complete Internet access configurations. For other settings, refer to
the Administrator Guide, which is contained in the CD-ROM delivered with the device.
Appendix
•Activating Licenses
More functions of the device will be available after a license is activated. Activate a license as follows:
1. Click the System tab on the web UI, and click License Management in the navigation tree.
2. Select Automatic Online Activation in License Activation Mode.
3. Fill the domain name of the license authorization server in the License Center Domain Name field. You can also
leave the field as default.
4. Find the license authorization code in the license certificate, which is delivered with the device, and enter it in the
License Authorization Code field.
5. Click Activate to activate the license.
•Obtaining Product Documents
The latest documents of all products are published at the technical support website (http://support.huawei.com/enterprise)
of Huawei Technologies Co., Ltd..
•Obtaining Technical Support
Contact your local representative for further information.
Thecontactinformationisavailableathttp://support.huawei.com/enterprise.
Ce manuel convient aux modèles suivants
1
Autres manuels Huawei Porte
Huawei
Huawei HG532e Manuel utilisateur
Huawei
Huawei HG630 V2 Manuel utilisateur
Huawei
Huawei Sunrise Internet Box 5G Manuel utilisateur
Huawei
Huawei E960 HSDPA Manuel utilisateur
Huawei
Huawei HG658 Manuel utilisateur
Huawei
Huawei B535-232a Manuel utilisateur
Huawei
Huawei HG655a Manuel utilisateur
Huawei
Huawei HG630a Manuel utilisateur
Huawei
Huawei B660 Manuel utilisateur
Huawei
Huawei HG532f Manuel utilisateur
Huawei
Huawei B932 series Manuel utilisateur
Huawei
Huawei EchoLife HG556a Manuel
Huawei
Huawei EchoLife HG520s Manuel utilisateur
Huawei
Huawei HG523a Manuel utilisateur
Huawei
Huawei E960 HSDPA Manuel utilisateur
Huawei
Huawei HA35 Manuel utilisateur
Huawei
Huawei HG658 V2 Manuel utilisateur
Huawei
Huawei HG659 Manuel utilisateur
Huawei
Huawei H138-380 5G CPE Caractéristiques techniques
Huawei
Huawei DG8245V Manuel utilisateur
Manuels Porte populaires d'autres marques
LST
LST M500RFE-AS Manuel utilisateur
Kinnex
Kinnex Media Gateway Manuel utilisateur
2N Telekomunikace
2N Telekomunikace 2N StarGate Manuel utilisateur
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur
Telsey
Telsey CPVA 500 - SIP Manuel utilisateur
