HUANUO HNDS6 Manuel utilisateur

English --------------------------------- 01-11

Deutsch --------------------------------- 12-21

Français --------------------------------- 22-31

Español --------------------------------- 32-41

Italiano --------------------------------- 42-51

日本語 --------------------------------- 52-61

Model: HNDS6

V6.0

Full Motion Desk Mount

Instruction Manual

Thank you for choosing this HUANUO product! At HUANUO we strive

to provide you with the best quality products and services in the

industry. Please share your experience of our product with others at

www.huanuoav.com/reviews if you are satisﬁed. Should you have any

issues, please don't hesitate to contact us.

Technical Support:

1-800-556-0533 Mon-Fri 10am - 5pm (PST) (USA) (CAN)

Other Info: [email protected] (US/CA)

[email protected](DE/UK/FR/IT/ES/NL/SE/AU)

[email protected] (JP)

Website:

www.huanuoav.com

IMPORTANT SAFETY INFORMATION

• Please carefully read all instructions before attempting installation. If you do not

understand the instructions or have any concerns or questions, please contact our

Product Support line at 1-800-556-0533 or customer service at

[email protected].

• CAUTION: Avoid potential personal injuries and property damage!

• Do not use this product for any purpose that is not explicitly speciﬁed in this

manual. Do not exceed weight capacity. We are not liable for damage or injury

caused by improper mounting, incorrect assembly or inappropriate use.

• This product contains a high pressure gas spring, ﬁre and percussion prohibited.

Also it is strictly prohibited to dismantle without professionals. Please return to the

manufacturer or hand over to professional agencies if the product is abandoned.

• The desk must be capable of supporting three times the weight of the total load

(the mount, the monitor and all accessories weight). Don't use the product on

particle board.

Weight Restrictions

Minimum VESA pattern: 75mm/3 in.(W)x75mm/3 in.(H)

If your monitor VESA is greater than 100x100 mm/4x4 in. or less

than VESA 75x75mm/3x3in., this mount is NOT compatible.

If this desk mount is NOT compatible, please contact customer service

at [email protected] to ﬁnd a compatible product.

MAX: 100mm/4 in.

75 mm ≈ 3 in.

100 mm ≈ 4 in.

If your monitor weighs more,

this mount is NOT compatible.

4.4~14.3lbs

(2~6.5kg)

DO NOT exceed the maximum weight indicated.

This mounting system is intended for use only within

the maximum weights indicated. Use with products

heavier than the maximum weights indicated may

result in failure of the mount and its accessories,

causing possible damage and or injury.

WARNING

Check the VESA Pattern of Your Monitor before the Installation

Product Features

Grommet Mounting

for grommet

25/64 ~3 35/64 in.

(10~90mm)

220° 360° 360°

9 27/32 in.

(250mm)

180°

-35°/+50°

Clamp Mounting

for table edge

25/64 ~3 35/64 in.

(10~90mm)

Do not adjust tension without monitor.

1. Ensure monitor has been attached to the mount.

2. Read your monitor box or manual to ﬁnd out monitor net weight.

3. Ensure the net weight of monitor (including accessories) is between

4.4~14.3 Ibs (2.0-6.5 kg).

Clockwise to reduce

tension (carry less weight) Counter-clockwise to increase

tension(carry more weight)

TENSION ADJUSTMENT SHOULD BE DONE ONLY

AFTER MOUNT INSTALLATION

Warning

Warning!

Adjustment Sign

Phillips Screwdriver

Tools Needed (Not lncluded)

Supplied Parts and Hardware for Step 1

Supplied Parts and Hardware for Step 2

Supplied Hardware for Step 3-8

Supplied Parts and Hardware

WARNING: This product contains small items that could be a choking hazard if

swallowed.

Before starting assembly, verify all parts are included and undamaged. Do not use

damaged or defective parts. lf you require replacement parts, contact our Product

Support line at 1-800-556-0533 or customer service at [email protected].

• Please note: Not all hardware included in this package will be used.

Arm

X2 C-Clamp Part

Bolt

M6x12mm

Bolt

M4x12mm

(A) X8

Bolt

M4x16mm

(B-1) X8

Spacer

5mm

(B-2) X8

Butterﬂy Nut/Grommet Bolt

(D) X1 Locking Plate

(F) X1

5/32 in.(4mm)

Small Allen Key

(E) X1

13/64 in.(5mm)

Large Allen Key

(G) X1

Electric Drill

(Optional)

Drill Bit

(Optional)

0.4 in.(10mm) - 2 in.(50mm)

Install The USB Lines

Note: Please install “line out” at

base & “line in” to PC as shown.

Step 1 Install the Base

⑤

①

②

③

④

line in

line out

USB Lines

(Not lncluded)

Warning:

Ensure bolts are secured ﬁrmly.

④

⑤

①②

③

Warning:

Ensure bolts are secured ﬁrmly.

Warning:

Ensure bolt is secured ﬁrmly.

1A. For Clamp Mounting 1A

Small Allen Key

03 02

4-1 Choose Proper Bolts 4-2 Install Monitors to the Arms

Be sure to keep the arm in

horizontal position during

adjustment. Or else, it would

be diﬃcult to adjust the

mount or damage the mount.

1. If the monitor can stay at the desired height

by itself, no adjustment needed.

2. If the monitor rises up, press the arm to

keep it in horizontal position and then use the

13/64 in. (5mm) Allen key (G) to turn the bolts

clockwise(“-” direction) to reduce tension of

the arm only until the monitor can stay at the

desired height by itself.

3. If the monitor falls down, lift the arm to

keep it in horizontal position and then use the

13/64 in. (5mm) Allen key (G) to turn the bolts

counter-clockwise(“+” direction) to increase

tension of the arm only until the monitor can

stay at the desired height by itself.

0.1-0.2in.(3-5mm) spacing left

between the end of bolt and monitor

back

Phillips

Screwdriver

[Not Included]

Flat back monitor

Curved back monitor

The tension is preset at

8.8-11 LBS(4-5kg).

After hanging the

monitor to the mount,

please release the

monitor slowly to

prevent it from falling

suddenly.

100x100mm

75x75mm

100x100mm

75x75mm

B-1

B-2

Step 2 Attach Monitors to the Arms

Step 3 Adjust Gas Spring Tension

75 mm ≈ 3 in.

100 mm ≈ 4 in.

1 rotation ≈ 1 lb

Large Allen Key

Notes: Ensure monitors weight is within load range.

Non-proper usage directions Proper usage directions

Step 4 Rotation Restriction

Warning:

Do not fully re-thread bolts.

Phillips

Screwdriver

[Not Included]

Step 5 Tilt Adjustment

Step 6 Swivel Adjustment

Step 7 Rotation Adjustment

Large Allen Key

Large

Allen Key

“+” Clockwise: Tighten

“-” Counter-clockwise: Loosen

Only suitable for the monitors with the

center of gravity in the center position

Table des matières

Autres manuels HUANUO Support et étagère

HUANUO

HUANUO HNCM6 Manuel utilisateur

HUANUO

HUANUO HNCM9 Manuel utilisateur

HUANUO

HUANUO HNSS12 Manuel utilisateur

HUANUO

HUANUO HNCM16 Manuel utilisateur

HUANUO

HUANUO HNCM18 Manuel utilisateur

HUANUO

HUANUO HNHM4 Manuel utilisateur

HUANUO

HUANUO HNCM3 Manuel utilisateur

HUANUO

HUANUO HNCM16 Manuel utilisateur

HUANUO

HUANUO HNLL3 Manuel utilisateur

HUANUO

HUANUO HADSK5 Manuel utilisateur

HUANUO

HUANUO HNCPB Manuel utilisateur

HUANUO

HUANUO HNCM20 Manuel utilisateur

HUANUO

HUANUO HNTS4 Manuel utilisateur

HUANUO

HUANUO HNWSS1 Manuel utilisateur

HUANUO

HUANUO HNDS8 Manuel utilisateur

HUANUO

HUANUO HNDS11 Manuel utilisateur

HUANUO

HUANUO HNCM5 Manuel utilisateur

HUANUO

HUANUO HNQF2 Manuel utilisateur

HUANUO

HUANUO HNCM17 Manuel utilisateur

HUANUO

HUANUO HNWDS1 Manuel utilisateur

HUANUO

HUANUO HNSSK4 Manuel utilisateur

HUANUO

HUANUO HNCM1 Manuel utilisateur

HUANUO

HUANUO HNKB03 Manuel utilisateur

HUANUO

HUANUO HNCM12-1 Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur