HS-Technik TorqBee TBP Series Manuel utilisateur
OPERATING INSTRUCTIONS
TorqBee®
- Original operang instrucons -
Issue date: February 2021
Tool Firmware: from 2.2.6.0
HST-Tool-Manager: from 2.0.6.0
NOTE
In case of doubt, the original German version
of the operang instrucons applies.
- 2 -
1.1 Scope of delivery 4
1.2 General informaon 4
1.3 Signs and symbols used 5
1.4 Structure of the warnings 6
1.5 Technical terms and abbreviaons used 6
1.6 Intended use 7
1.7 Improper use 8
1.8 Dues of the operator 8
1.9 Dues of personnel 8
1.10 Training of personnel 9
1.11 Guarantee and liability 9
1.12 Copyright 10
2.1 Occupaonal safety 11
2.2 Electrical safety 12
2.3 Safety of people 12
2.4 Use and handling of power tools 13
2.5 Use and handling of baery tools 14
2.6 Service 15
3.1 Handling the associated lithium ion baery 16
3.2 Informaon on the associated charger 17
3.3 Structural modicaons 17
3.4 Cleaning the device and disposal 18
4.1 Tool structure 20
4.2 Operaon 24
4.2.1 Inserng and removing the baery 24
4.2.2 Press start buon 25
4.2.3 Clockwise / Counterclockwise rotaon switch 25
4.2.4 LED / Barcode scanner 26
4.2.5 Control light with mul-colour LED 26
4.2.6 Seng the ghtening torque at pistol tools 27
4.2.7 Setting the tightening torque at angle & straight tools 28
4.2.8 Cancel order 29
4.2.9 Set-up menu 29
4.2.10 Operaon 32
PAGE
4
PAGE
11
PAGE
16
PAGE
19
- 3 -
5.1 Display indicators 33
5.2 HST-Tool-Manager 39
5.2.1 Setup 42
5.2.2 General → Process control 42
5.2.3 General → Energy & Lighng 44
5.2.4 General → Features 45
5.2.5 General → TM version 46
5.2.6 Management 47
5.2.7 Signals → OLED-display 48
5.2.8 Signals → LED 49
5.2.9 Signals → Sound signals 50
5.2.10 Signals → Vibraon alarm 51
5.2.11 Graphics 52
5.2.12 System me 53
5.2.13 Basic sengs 54
5.2.14 Update 55
5.2.15 Programs 56
8.1 Technical data for all tool types 59
8.2 Pistol tool 60
8.3 Angle tool 62
8.4 Straight tool 70
PAGE
33
PAGE
57
PAGE
58
PAGE
59
PAGE
72
PAGE
73
- 4 -
Dear customers,
thank you for choosing a HS-Technik GmbH product.
This quality product „Made in Germany“ fulfils the highest requirements with regard to
performance, quality and accuracy. When used correctly the product will undoubtedly
perform very well for many years.
These operating instructions contain information on safety and for the operation of the
tool. In addition it contains information on the dimensions and technical data. We would
be happy to assist you with additional information or to answer your questions. Our
technical support and our technicians would be happy to assist you.
• Baery ghtening tool
• USB Cable (Type A on Mini B)
• Operang instrucons
Read the operating instructions before initial operation.
This operang instrucon should make it easier for the operator to get to know the tool
and to use it for its intended purpose. The operating instructions include important
information related to the safe and proper operation of the tool. Compliance with these
instructions helps you to:
• Avoid hazards
• Avoid repair costs and downtimes
• Increase the reliability and the lifespan of the product.
- 5 -
This operating instructions must be read and applied by every person who is assigned to
conduct work using this tool.
In addition to these operation instructions the applicable regulations on accident
prevention and environmental protection should be observed.
NOTE
Aer reading, keep the operang instrucons in a place accessible to every
operator. If you have any further quesons, please feel free to contact us.
The following signs and symbols will be used in this operating instruction or on the
product:
Read this operang instrucons
Do not dispose with household waste
Do not dispose the baery in a re
Do not throw the baery into water
EU conformity marking
®Registered trademark
- 6 -
The warnings are structured as follows:
DANGER
Indicates an immediate dangerous situaon that can lead to serious or even
deadly injuries and/or that could seriously damage or even destroy the tool.
WARNING
Indicates a potenally dangerous situaon that can lead to serious injuries
and/or damage to the tool.
NOTE
Important and useful informaon on using this tool.
°C Degrees Celsius, temperature
AC Alternate current
Ah Amp hours, electric charge, baery capacity
ahv Overall vibraon
dB(A) Decibels, sound pressure level (A-weighted)
DC Direct current
Hz Hertz, Frequency
Li-Ion Lithium-ion, baery technology
LpA Emission sound pressure level, workplace-related
m/s² Acceleraon, Vibraon
- 7 -
min-1 Revoluons per minute, Speed
mNN Meters above sea level, height
SN Serial number
V Volts, electrical voltage
W Was, electrical power
Nm Newton meters, torque
This battery tool was designed to prepare screw connections.
The tool may only be used for this purpose as described in this operating instructions.
Only materials that are suitable for this type of tool may be used.
WARNING
Intended use also includes
• following all indicaons of the operang instrucons and
• observance of inspecon and maintenance works.
Any other use or use beyond that is considered improper use. HS-Technik GmbH is not
liable for any damage resulting from this.
- 8 -
DANGER
The use of this tool for other purposes, e.g. for hammering, is not permied.
Improper use or incorrect accessories can lead to dangers with unforeseeable
consequences.
We accept no liability for damage and malfunctions resulting from non-observance of
these operating instructions and improper use.
The operator undertakes to only allow people who are familiar with the basic regulations
on work safety and accident prevention and who have been trained on how to use the
tool at the workplace and to work with this tool.
The safety awareness of the personnel while working has to be reviewed at regular
intervals.
In addition it is necessary to define safety measures for operator protection which are
based upon an estimation of the vibration load during actual conditions of use.
Prior to its use all people who work with this tool are obligated to inform themselves of
the applicable workplace safety and accident prevention regulations for this power tool
and to observe them.
It is recommended that every operator wears hearing protection.
- 9 -
Only trained and instructed personnel should work with this tool. The responsibilities of
the personnel must be clearly defined. Trainees may only work with this power tool under
the supervision of an experienced person.
Guarantee and liability claims for personal injury and property damage are excluded, if
caused by one or more of the following:
• improper use
• failure to observe these operating instructions
• improper installation, commissioning, operation and maintenance of the device
• Operating the device with defective safety devices or improperly installed, or non-
functioning safety and protective devices
• Failure to observe the information in the operating instructions regarding transport,
storage, assembly, commissioning, operation and maintenance of the device
• unauthorised structural modifications to the device
• improperly performed repairs
• catastrophes due to external influences and acts of God
- 10 -
These operating instructions are intended solely for the operator and its personnel.
They contain guidelines and information which may not be fully, or partially
• reproduced
• distributed or
• otherwise shared.
The copyright of these operating instructions is retained by HS-Technik GmbH.
Manufacturer’s address:
Im Martelacker 12
D-79588 Efringen-Kirchen
Telephone: +49 (0)7628 - 91 11-0
Fax: +49 (0)7628 - 91 11-90
E-mail: [email protected]
Internet: www.hs-technik.com
Ce manuel convient aux modèles suivants
58
Table des matières
Autres manuels HS-Technik Outils électriques
