HPRT GT1 Manuel utilisateur
GT1
Quick Start Guide ---------------------------------
Instrucciones---------------------------------------
取扱説明書 ------------------------------------------
01
10
19
Content
EN
JP
ES
Product Introduction
Front View:
Paper Outlet
Power Button
Left Cover
Opening Button Right Cover
Opening Button
Paper Inlet
Printer Cover
Upper Cover
Rear View:
USB Type-B Port
Power Port
01
Inside View:
Accessories
Power Adapter*1 USB Cable*1
02
Ribbon Loading
Open covers01
Open the upper cover first, and then press the buttons on both sides of the printer
cover at the same time. Lift the printer cover upward.
03
Load ribbon
02
Hold the left and right brackets of the ribbon with both hands and load the ribbon
into the printer.
Make sure that the barcode label position is the same as shown in the picture
when loading.
Press down the printer cover with your hands until hear a "snap" sound.
Close printer cover
03
Barcode Label
！
04
Paper Loading
Load paper
01
Load papers as shown, recommended not to put more than 20 sheets at a time.
05
Power On
Connect power supply
Power On
To turn off the printer, also hold down the power button for 3 seconds.
01
02
Hold down the power button for 3 seconds to turn on the printer.
Plug one end of the power cord into the printer's power port, and then plug the
adapter into a power outlet.
06
Printing from Mobile Phone
APP Download
01
Connect to printer via Wi-Fi
Connect the mobile phone to a Wi-Fi hotspot (must be 2.4 GHz);
Open App, click “Connect printer”, and “Connect” with “HPRT GT1-XXXX”(XXXX
are last four digits of Bluetooth address);
Enter the Wi-Fi password;
Click “Set” and waiting for the connection result.
Scan the QR code to download the APP.
02
03 Print
Open the document you want to print, and copy/share it to APP. (Or click
“Documents” on Home to choose the document.) ;
Adjust it in Print preview, and click “Print” to print it.
04 Printing from Cloud
The printer is on and have been connected to an available Wi-Fi;
Even though the printer is not around you, you can still choose a document and
print it via our APP by click “Print”in Print preview.
07
Precautions
The best operating temperature is 0℃~40℃, if the environmental temperature
is too low or too high, the print quality may be affected.
Please do not use the unofficial adapter, ribbon or paper to ensure the print
quality.
During printing, the area around the print head is very hot. Do not touch it to
avoid burns.
Do not pull out paper by force during printing, or else it may damage the printer.
Operating this device in a residential environment may cause radio interference.
Printing from Computer
Connect one side of the USB cable to the computer and the other side to the
printer;
Turn on the printer;
Download the printer driver from the website: www.hprt.com/HPRT-GT1
And then install it on the computer;
Choose the document you want to print and print it via printer “HPRT GT1”.
08
Table des matières
Langues :
Autres manuels HPRT Imprimante
HPRT
HPRT SK41 Manuel utilisateur
HPRT
HPRT MPT-II Manuel utilisateur
HPRT
HPRT TP806L Manuel utilisateur
HPRT
HPRT HM-T3 Manuel utilisateur
HPRT
HPRT MPD2 Manuel utilisateur
HPRT
HPRT MPT8 Manuel du propriétaire
HPRT
HPRT HM-A300S Manuel utilisateur
HPRT
HPRT HM-E200 Manuel du propriétaire
HPRT
HPRT TP80K Manuel du propriétaire
HPRT
HPRT MPT-III Manuel utilisateur
HPRT
HPRT TP801 Manuel utilisateur
HPRT
HPRT MT810 Manuel utilisateur
HPRT
HPRT HM-T300 Manuel utilisateur
HPRT
HPRT TP808 Manuel utilisateur
HPRT
HPRT TP801 Manuel utilisateur
HPRT
HPRT HM-T300 Manuel utilisateur
HPRT
HPRT Poooli L1 Manuel utilisateur
HPRT
HPRT MT800 Manuel utilisateur
HPRT
HPRT FC53-Li Manuel utilisateur
HPRT
HPRT HM-Z3 Manuel utilisateur
