HP ProCurve 420 NA Instructions de montage

Product End-of-Life Disassembly Instructions

Product Category: Networking Equipment

Marketing Name / Model

[List multiple models if applicable.]

HP ProCurve Wireless Access Point 420 NA - J8130A

HP ProCurve Wireless Access Point 420 WW - J8131A

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA) With a surface greater than 10 sq cm

Unpopulated circuit board used as stripline matching

network or antenna element.

Batteries All types including standard alkaline and lithium coin

or button style batteries 0

Mercury-containing components For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries 0

Liquid Crystal Displays (LCD) with a surface greater

than 100 sq cm Includes background illuminated displays with gas

discharge lamps 0

Cathode Ray Tubes (CRT) 0

Capacitors / condensers (Containing PCB/PCT) 0

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height 0

External electrical cables and cords 1

Gas Discharge Lamps 0

Plastics containing Brominated Flame Retardants 0

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent

chambers, and service stations. 0

Components and waste containing asbestos 0

Components, parts and materials containing

refractory ceramic fibers 0

EL-MF877-00 Page 1

Template Revision A

Components, parts and materials containing 0

EL-MF877-00 Page 2

Template Revision A

radioactive substances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description Tool Size (if

applicable)

Two Philips Screw Drivers #0 & #1

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Remove two antennas if attached to the unit (un-screw).

2. Remove the plastic cover (pull slightly out and up to remove cover)

3. Remove two screws from the bottom, use philips screw driver with tip# 0

4. Slide out the metal cover at the bottom

5. Remove 5 screws holding PCA to the chassis, use philips screw driver with tip# 1

6. Remove the PCBA from chassis

10.

11.

12.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HP Point d'accès sans fil

HP P 1981 A Manuel utilisateur

HP Aruba 570 Series Manuel utilisateur

HP Aruba AP-374 Instructions de montage

HP ProCurve MSM317 Manuel utilisateur

HP M210 802.11n Manuel utilisateur

HP ProCurve Wireless Access Point 530 Manuel utilisateur

HP ProCurve 420 Manuel utilisateur

HP MSM410 Manuel utilisateur

HP 650 Series Manuel utilisateur

HP P1981A Manuel utilisateur

HP MSM310 Comment utiliser

HP Vectra 525 Manuel utilisateur

HP MSM-802.11 series Manuel utilisateur

HP MSM422 802.11n Manuel utilisateur

HP 530 - Notebook PC Manuel de programmation

HP M330 Manuel utilisateur

HP MSM422 Manuel utilisateur

HP MSM323-R Manuel utilisateur

HP WL520 Manuel utilisateur

HP MSM410 Manuel utilisateur

HP Aruba AP-375 Instructions de montage

HP ProCurve 420 Manuel utilisateur

HP ProCurve 520wl Instructions de montage

HP MSM310 Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur