HP T750 G2 Manuel utilisateur

HP UPS Battery Replacement

Installation Instructions

Important battery safety

information

WARNING: The unit contains sealed lead-acid battery

modules. To prevent fire or chemical burns:

Do not attempt to recharge batteries after removal from

the unit.

Do not disassemble, crush, or puncture the batteries.

Do not short the external contacts of the batteries.

Do not immerse the batteries in water.

Do not expose to temperatures higher than 60°C

(140°F).

WARNING: To prevent personal injury from hazardous

energy:

Remove watches, rings, or other metal objects.

Use tools with insulated handles.

Do not place tools or metal parts on top of batteries.

WARNING: To prevent personal injury, prepare the area

and observe all materials-handling procedures when

transporting a battery module. Battery modules weigh 20

kg (44 lb).

NOTE: Replace all battery modules at the same time.

UPS battery replacement overview

The battery modules are hot swappable and can be replaced without

powering down the UPS. To power down the UPS, see the UPS user

guide for instructions.

CAUTION: When hot-swapping batteries, the UPS is not

protected in the event of a utility power failure, unless at

least one ERM is installed.

IMPORTANT: Charge the batteries before supplying

backup power to devices. See the UPS user guide for

recommended charging times.

HP UPS T750 G2/T1000 G3

1. Remove the UPS front bezel.

2. Remove the UPS battery bracket.

The information contained herein is subject to change without notice. The only

warranties for HP products and services are set forth in the express warranty

statements accompanying such products and services. Nothing herein should

be construed as constituting an additional warranty. HP shall not be liable for

technical or editorial errors or omissions contained herein.

CAUTION: Carefully remove the metal battery bracket to

avoid damaging the battery lead connectors.

3. Disconnect the red battery lead, and then pull the battery out

onto a flat, stable surface.

CAUTION: The battery is unsupported when you pull it out

of the UPS.

Part Number 533513-002

August 2009 (Second Edition)

533513-002

Printed in China

4. Disconnect the black battery lead on the back of the battery.

To replace the components, reverse the removal procedure.

CAUTION: To avoid damage to the battery leads, be sure

that the cables do not bind against the guide rail while

reinstalling the battery.

HP UPS T1500 G3

1. Remove the UPS front bezel.

2. Remove the UPS battery bracket.

3. Disconnect the red battery lead, and then slowly pull the

battery out just far enough to expose the cable retainer for the

black battery lead.

4. Carefully remove the black battery lead from the cable

retainer, and then completely pull the battery out onto a flat,

stable surface.

CAUTION: The battery is unsupported when you pull it out

of the UPS.

5. Disconnect the black battery lead.

To replace the components, reverse the removal procedure.

NOTE: A small amount of arcing may occur when

connecting the batteries. This is normal and does not

damage the unit or present any safety concern.

HP UPS R1500 G2

1. Remove the UPS front bezel.

2. Disconnect the battery leads.

3. Remove the UPS battery bracket. Carefully pull the battery

leads through the hole in the battery bracket.

4. Remove the UPS battery modules.

IMPORTANT: Do not pull the battery leads when removing

or installing the batteries.

To replace the components, reverse the removal procedure.

HP UPS R3000

1. Remove the UPS front bezel.

2. Disconnect the battery leads.

3. Remove the UPS battery bracket.

4. Remove the UPS battery modules.

To replace the components, reverse the removal procedure.

HP UPS R/T3000 HP 3 Phase UPS R8000/3 and

R12000/3

WARNING: To prevent personal injury from electric shock

or damage to the equipment, remove the battery lead

labels, and verify that the ERM circuit breakers are in the

Off position.

1. Remove the UPS front bezel.

2. Remove the UPS battery bracket.

3. Remove the UPS battery modules.

1. Remove the UPS front bezel.

2. Disconnect the battery leads.

3. Remove the UPS battery bracket.

4. Remove the UPS battery modules.

IMPORTANT: Do not pull the battery leads when removing

or installing the batteries.

To replace the components, reverse the removal procedure.

Battery replacement notice

WARNING: Power products contain sealed lead-acid

battery modules. A risk of fire and burns exists if the

battery is not properly handled. To reduce the risk of

personal injury:

Do not attempt to recharge the battery.

Do not expose the battery to temperatures higher than

60°C (140°F).

Do not disassemble, crush, puncture, short external

contacts, or dispose of in fire or water. The battery

might explode.

To replace the components, reverse the removal procedure.

HP UPS R5500

1. Remove the UPS front bezel.

2. Remove the UPS battery bracket.

3. Remove the UPS battery modules.

Batteries, battery packs, and accumulators

should not be disposed of together with the

general household waste. To forward them to

recycling or proper disposal, use the public

collection system or return them to HP, an

authorized HP Partner, or their agents.

For more information about battery replacement or proper disposal,

contact an authorized reseller or an authorized service provider.

To replace the components, reverse the removal procedure.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HP UPS

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur