HP StorageWorks 2/32 - SAN Switch Mode d’emploi

hp StorageWorks

SAN switch 2/32, version 4.0.2b

release notes

Part Number: AV-RTT4A-TE

First Edition (October 2002)

These Release Notes contain late-breaking and supplemental information for the hp

StorageWorks SAN switch 2/32, Version 4.0.2b. In the event of conflicting

information between these Release Notes and other documents contained in this

product release, the Release Note content takes precedence.

For the latest version of these Release Notes and other product documentation, visit

the StorageWorks website at:

http://www.compaq.com/storage/index.html

Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but

not limited to, the implied warranties of merchantability and fitness for a particular purpose.

Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential

damages in connection with the furnishing, performance, or use of this material.

This document contains proprietary information, which is protected by copyright. No part of this

document may be photocopied, reproduced, or translated into another language without the prior

written consent of Hewlett-Packard. The information contained in this document is subject to change

without notice.

Microsoft, MS-DOS, Windows, and Windows NT are trademarks of Microsoft Corporation in the U.S.

and/or other countries.

BROCADE, the Brocade B weave logo, Brocade: the Intelligent Platform for Networking Storage,

SilkWorm, and SilkWorm Express, are trademarks or registered trademarks of Brocade

Communications Systems, Inc. or its subsidiaries in the United States and/or in other countries.

All other product names mentioned herein may be trademarks of their respective companies.

Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained

herein. The information is provided “as is” without warranty of any kind and is subject to change

without notice. The warranties for Hewlett-Packard Company products are set forth in the express

limited warranty statements accompanying such products. Nothing herein should be construed as

constituting an additional warranty.

Printed in the U.S.A.

SAN switch 2/32, version 4.0.2b release notes

First Edition (October 2002)

Part Number: AV-RTT4A-TE

Release Notes Contents

SAN switch 2/32, version 4.0.2b release notes 3

Welcome to the hp StorageWorks SAN Switch 2/32! Thank you for choosing our

products. This file contains late-breaking changes that may not be included in the

product documentation. It also provides information for computers that may not have

the ability to use Acrobat to determine what is on the hp StorageWorks SAN Switch

2/32 Software v4.0.2b CD.

Release Notes Contents

These Release Notes cover the following major topics:

•Firmware Version 4.0.2b Overview, page 4

•Prerequisites for Upgrading or Restoring Firmware, page 4

•Adding the SAN Switch 2/32 to an Existing Fabric, page 5

•SAN Switch 2/32 Hardware Updates, page 6

•SAN Switch 2/32 Firmware Version 4.0.2b Updates, page 7

•Compatibility, page 12

•Standards Compliance, page 14

•hp StorageWorks SAN Switch 2/32 Software v4.0.2b CD, page 15

•Related Documentation, page 17

•Web Tools Management Station Requirements, page 18

•Using the Java Plug-In, page 23

•Licenses, page 24

•Known Issues, page 24

Firmware Version 4.0.2b Overview

4SAN switch 2/32, version 4.0.2b release notes

Firmware Version 4.0.2b Overview

The hp StorageWorks SAN Switch 2/32 ships with Version 4.0.2b firmware.

Firmware improvements per this release involve:

• link initialization

•API

•SNMP

•help

• firmware download

• web server security.

Prerequisites for Upgrading or Restoring Firmware

Read this section before upgrading/restoring switch firmware.

Verify that a Windows NT or 2000 FTP Server is Installed

An FTP server must be installed and running when performing the Telnet command

configUpload on a Windows NT or 2000 system. If you do not have a Microsoft

Windows NT or 2000 FTP service previously installed on your system, you need to

install it.

Use the following steps to install and configure a Windows NT or 2000 FTP server.

1. Create a folder for the switch firmware and configuration files.

2. Install the Windows NT or 2000 FTP server on your system from your Windows

installation CD.

NOTE: If you only use the FTP server for the firmware and configuration loads, you can

specify the folder created in Step 1 as the FTP Publish Directory.

3. Open the Internet Service Manager Tool.

4. Issue the configUpload command. Save the configuration.

Adding the SAN Switch 2/32 to an Existing Fabric

SAN switch 2/32, version 4.0.2b release notes 5

Adding the SAN Switch 2/32 to an Existing Fabric

Read the following section for important information related to adding the switch to

the fabric.

Merging a New Switch to a Fabric Containing an Active Zone

Configuration

Use these steps to merge a new switch to a fabric with an active zone configuration

database.

1. Log into the new switch.

2. Verify that a Zoning license is installed. Use the licenseshow command to

view currently installed licenses.

3. Verify the Core Port Idntifier (PID) Format is consistent with the existing fabric.

Use the configure command to view current Core PID Format setting.

NOTE: The SAN Switch 2/32 is preconfigured with the Core PID format enabled. The existing

fabric must also have this format enabled. The configure command is used to change the

PID format. If the PID format is not consistent across the fabric, the fabric will segment. Refer to

Appendix B in the hp StorageWorks SAN Switch 2/32 Installation Guide supplied with your

switch for information on setting the Core PID format.

4. Verify that the available memory on the new switch is large enough for the

existing zone configuration database. Use the cfgsize command to verify the

maximum size of zone configuration database for the switch. For example,

a. A Fabric OS v2.6.0x switch can accommodate up to 96K of zone

configuration database.

b. A Fabric OS v3.0.2x switch can accommodate up to 128K of zone

configuration database.

c. A Fabric OS v4.0.2b switch can accommodate up to 128K of zone

configuration database.

5. Verify that the SAN Switch 2/32’s interoperability mode is consistent with the

pre-existing switches in the fabric. Use the interopmode command to view the

interoperability mode of the switch.

NOTE: If the interopmode is inconsistent between the new switch and the fabric, the merge fails

and fabric segments. If the switches use different interopmode settings, you must make them

the same. Refer to the HP StorageWorks Fabric Operating System Procedures Version

3.0.x/4.0.x User Guide for detailed information on updating the interopmode.

SAN Switch 2/32 Hardware Updates

6SAN switch 2/32, version 4.0.2b release notes

6. Clear the switch of all zoning information by running the following set of

commands:

cfgdisable

cfgclear

cfgsave

7. Connect the switch to the fabric through an ISL cable. Once the switch is

connected to the fabric, the zone configuration information for the fabric will

automatically copy to the switch.

8. Clear the Management server Platform Database from the switch with the

msPlClearDB command.

SAN Switch 2/32 Hardware Updates

The following section lists hardware updates for the SAN Switch 2/32.

Important Information Regarding the HP System/e Rack

Mounting Hardware

HP highly recommends installing the switch in the optional System/e Rack using only

the hardware supplied with the rack.

For example, when installing the two inner rails on either side of the switch, you must

use the six #8-32 x 5/16 Phillips pan-head screws, and #8 flat washers as specified in

the hp StorageWorks SAN Switch 2/32 Installation Guide. The #8 flat washer shortens

the #8-32 x 5/16 Phillips pan-head screw so that it does not interfere with the internal

components of the switch.

IMPORTANT: Using longer than recommended screws to install your switch into the HP

System/e Rack Kit will result in physical damage to the switch motherboard.

Documentation Updates

SAN switch 2/32, version 4.0.2b release notes 7

Documentation Updates

The hp StorageWorks SAN Switch 2/32 Version 4.0.x Installation Guide supplied with

your switch lists the HP System/e Rail Kit as an option. This is not always true.

When ordering the SAN Switch 2/32, you may receive an HP System/e Rail Kit in

addition to standard components with your order. Use the HP System/e components

for mounting your switch in an HP System/e Rack, following the instructions

provided in the SAN Switch 2/32 Installation Guide.

NOTE: The hardware that makes up the HP System/e Rail Kit are non-saleable components.

You can identify this hardware per the following HP part numbers:

• A7340-87901 (Rail, qty 2)

• A7340-87902 (hardware, qty 1)

SAN Switch 2/32 Firmware Version 4.0.2b Updates

The following lists enhancements to Fabric OS Version 4.0.2b:

IMPORTANT: Fabric OS Version 4.0.2b firmware works with the hp StorageWorks SAN Switch

2/32 and the hp StorageWorks SAN Core Switch 2/64. This firmware will not work if loaded onto

the hp StorageWorks SAN Switch 1 Gb models, or the hp StorageWorks SAN Switch 2/8 EL,

2/16 or 2/16 EL models.

Firmware Download Functionality

This section summarizes changes to the firmware download functionality. For more

detailed information refer to the hp StorageWorks Fabric OS Version 3.0.x/4.0.x

Reference Guide.

firmwaredownload

Use this admin level command to download new firmware version to a switch.

firmwarecommit

Use this admin level command to commit a new firmware version to both partitions of

flash memory. The SAN Switch 2/32 maintains a primary and secondary partition for

firmware. The firmwaredownload command writes to the secondary partition

only and automatically commits the firmware at the end of the download process,

following a switch reboot.

If you wish to override the auto-commit setting, you must use the “-sn” option on the

switch. See the help page for more details. HP recommends maintaining the same

firmware version on each partition of a switch or CP card.

SAN Switch 2/32 Firmware Version 4.0.2b Updates

8SAN switch 2/32, version 4.0.2b release notes

firmwarerestore

Use this admin level command to delete a new firmware version download from flash

memory and restore the previous version of the firmware from the secondary partition.

This can only be performed if the firmwaredownload was previously executed

with the auto-commit flag disabled.

firmwaredownloadstatus

Use this admin level command to display the status of a firmware download. This

command displays an event log that records the progress and status of the current

firmwaredownload command. The event log is created by the current

firmwaredownload command and is retained until another

firmwaredownload command is issued. A timestamp is associated with each

event.

firmwareshow

Use this user level command to display the firmware version information for the

primary and secondary partitions of flash memory on a switch.

Error Log Enhancements

The Error Log subsystem now retains a maximum of 1,536 messages in RAM, that is,

a total of 256 messages for each error message level (Panic, Critical, Error, Warning,

Info, and Debug). In addition, important messages are stored in a separate persistent

error log to guarantee that they are not lost in case of power outage or system reboot.

IMPORTANT: The enhancement prevents messages of lesser severity from overwriting

messages of greater severity. For example, Warning messages cannot overwrite Error, Critical

or Panic messages.

Error log updates include:

• The error log subsystem supports persistent logging. Each switch integrates its

own persistent log.

• The persistent log is preserved across power cycles and system reboots.

• The persistent log has a default capacity to store 1,024 error log entries.

• The persistent log can be resized at run time without having to reboot the switch

or the system.

• The persistent log is configurable to a maximum of 2,048 entries. The persistent

error log can be resized to between 1,024 and 2,048 entries.

SAN Switch 2/32 Firmware Version 4.0.2b Updates

SAN switch 2/32, version 4.0.2b release notes 9

• The persistent log is implemented as a circular buffer. When more than maximum

entries are added to the persistent log, new entries overwrite old entries.

• All error messages of levels Panic and Critical are automatically saved in the

persistent log as they are logged. This guarantees that critical or panic level

messages are not lost in the event of unexpected system reboot or fail-over.

• A new command to control/filter error log messages. For example, the user may

specify that all log messages marked Warning remain in the persistent error log.

• The commands errdump or errshow display a combination of the persistent

log messages saved during previous system run time cycles, and the error log

messages generated during the current run time cycle.

NOTE: Within Web Tools, the Fabric View Events ICON window does not separate persistent

from RAM error messages. Please use the Events ICON located on the SAN Switch 2/32 for

additional log details.

New Persistent Error Logging Commands

Three Fabric OS commands were modified and four new commands added for the

persistent error logging functionality. For more information, refer to the hp

StorageWorks Fabric OS Version 3.0.x/4.0.x Reference Guide.

The following commands were modified:

•errdump

•errshow

•errclear

Also, the following commands allow you to manage the persistent error log:

•errsavelvlset

•errsavelvlshow

•errnvlogsizeset

•errnvlogsizeshow

SAN Switch 2/32 Firmware Version 4.0.2b Updates

10 SAN switch 2/32, version 4.0.2b release notes

Fabric OS Command Changes

The following lists new or modified commands added to the Fabric OS Version 4.0.2b:

•killtelnet command

•loopporttest command

•portcfgdelayflogi command

•supportshow command

•portcfglongdistance command

•portcfgshow command

•ifmodeset command

NOTE: For more information about these commands, refer to the hp StorageWorks Fabric OS

Version 3.0.x/4.0.x Reference Manual.

portcfglongdistance Command Summary

Extended links in the same SAN are either 1Gb or 2Gb, but not both. If you have 1 Gb

extended links in the the SAN you can not add a 2Gb Extended Link to the same SAN.

Enhancement

A new parameter was added to this command. The new syntax is as follows:

portCfgLongDistance [slot/]port[, distance_level][, linkinitmode]

linkinitmode Operand

The linlinitmode operand applies to long distance setup only. It does not affect a

normal link. It is added to ensure the long distance link initialization sequence.

It is not required for long distance, but may be useful when initiating L1 and L2 links.

linkinitmode Usage

Specify 1 to activate a long distance link initialization sequence. Specify 0 to

deactivate this mode. The default value is 0 (disabled). This operand is optional. The

following example is for a 100km link on a port in a V4.0 switch with long distance

link initialization protocol enabled:

switch:admin> portCfgLongDistance 2/3 L2 1

done.

Autres manuels pour StorageWorks 2/32 - SAN Switch

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HP Changer

HP HP 2530 Manuel utilisateur

HP A10500 Series Manuel utilisateur

HP ProCurve 4202vl-48G Manuel utilisateur

HP 262586-B21 - IP Console Switch 3x1x16 KVM Manuel utilisateur

HP J9575A Manuel utilisateur

HP 6125G Manuel d'installation

HP OfficeConnect 1820 24G PoE+ Manuel utilisateur

HP StorageWorks 2/140 - Director Switch Manuel utilisateur

HP A7533A - Brocade 4Gb SAN Switch Base Manuel utilisateur

HP JE009A Instructions d'utilisation

HP StorageWorks Brocade Manuel utilisateur

HP A7990A - StorageWorks SAN Director 4/16 Blade... Manuel d'utilisation et d'entretien

HP 3600 EI series Manuel utilisateur

HP FlexNetwork 5130 HI series Manuel d'installation

HP 1920 Gigabit Ethernet Switch Series Manuel utilisateur

HP SN3000B Instructions d'utilisation

HP Procurve Series 4100GL Manuel utilisateur

HP A3100-16 DC EI Manuel utilisateur

HP A3600-24 v2 Instructions d'installation

HP 480-0005-00-15 Manuel utilisateur

HP AdvanceStack Switch 2000 Manuel utilisateur

HP J1473A Manuel utilisateur

HP 3600 v2 Series Manuel d'installation

HP StorageWorks 2/16-EL Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur