HP 6125G Manuel d'installation

HP 6125 Blade Switch Series

bout the HP 6125 Blade Command References

Part number: 5998-3163

Software version: Release 2103

Document version: 6W100-20120907

Legal and notice information

No part of this documentation may be reproduced or transmitted in any form or by any means without

prior written consent of Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS

MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained

herein or for incidental or consequential damages in connection with the furnishing, performance, or

use of this material.

The only warranties for HP products and services are set forth in the express warranty statements

accompanying such products and services. Nothing herein should be construed as constituting an

additional warranty. HP shall not be liable for technical or editorial errors or omissions contained

herein.

About the HP 6125 Blade command references

The HP 6125 Blade command references describe the commands and command syntax options

available for the HP 6125 Blade Switch Series.

Command Reference Content

01 Fundamentals Command

Reference

Covers the commands for logging in to and setting up the switch. This

command reference includes:

•CLI (command privilege settings and CLI management commands)

•Logging in to the switch

•FTP

•TFTP client

•File management commands

•Configuration file management

•Software upgrade

•Device management

02 IRF Command Reference Covers IRF configuration commands, including IRF port binding,

member ID assignment, priority assignment, and MAD.

03 Layer 2—LAN Switching

Command Reference

Covers the commands for configuring Layer 2 technologies and

features in a LAN switched network. This command reference

includes:

•Ethernet interface

•Loopback and null interfaces

•Bulk configuring interfaces

•MAC address table

•MAC Information

•Ethernet link aggregation

•Port isolation

•Spanning tree

•BPDU tunneling

•VLAN

•Isolate-user-VLAN

•Voice VLAN

•GVRP

•QinQ

•VLAN mapping

•LLDP

•Service loopback group

•Layer 2 forwarding

Command Reference Content

04 Layer 3—IP Services Command

Reference

Covers the commands for configuring and managing IP addressing

(including static and dynamic IPv4 and IPv6 address assignment),

UDP helper, DNS, network performance optimization, ARP, and

interoperation between IPv4 and IPv6. This command reference

includes:

•ARP

•Gratuitous ARP

•Proxy ARP

•ARP snooping

•IP addressing

•DHCP relay agent

•DHCP client

•DHCP snooping

•BOOTP client

•IPv4 DNS

•IP performance optimization

•UDP Helper

•IPv6 basics

•DHCPv6

•Tunneling

05 Layer 3—IP Routing Command

Reference

Covers the commands for configuring routes for IPv4 and IPv6

networks of different sizes, route filtering, route control, and policy

based routing. This command reference includes:

•IP routing basics

•Static routing

•RIP

•OSPF

•IS-IS

•BGP

•IPv6 static routing

•RIPng

•OSPFv3

•IPv6 IS-IS

•IPv6 BGP

•Routing policy

•Policy-based routing

Command Reference Content

06 IP Multicast Command Reference

Covers the commands for Layer 3 IPv4 multicast protocols (IGMP,

PIM, MSDP, and MBGP), and Layer 3 IPv6 multicast protocols (MLD,

IPv6 PIM, and IPv6 MBGP), Layer 2 IPv4 multicast protocols (IGMP

snooping, PIM snooping, and multicast VLAN), and Layer 2 IPv6

multicast protocols (MLD snooping, IPv6 PIM snooping, and IPv6

multicast VLAN). This command reference includes:

•IGMP snooping

•PIM snooping

•Multicast VLAN

•Multicast routing and forwarding

•IGMP

•PIM

•MSDP

•MBGP

•MLD Snooping

•IPv6 PIM snooping

•IPv6 multicast VLAN

•IPv6 multicast routing and forwarding

•MLD

•IPv6 PIM

•IPv6 MBGP

07 ACL and QoS Command

Reference

Covers the commands for classifying traffic with ACLs, and allocating

network resources and managing congestions with QoS technologies

to improve network performance and network use efficiency. This

command reference includes:

•ACL

•QoS policy

•Priority mapping

•GTS and line rate

•Congestion management

•Congestion avoidance

•Aggregate CAR

Command Reference Content

08 Security Command Reference

Covers security feature commands. Available security features

include identity authentication (AAA), access security (802.1X, MAC

authentication and port security), secure management (SSH), and

attack protection (IP source guard, ARP attack protection, and URPF).

This command reference includes:

•AAA

•802.1X

•EAD fast deployment

•MAC authentication

•Port security

•User profile

•Password control

•Public key

•PKI

•SSH

•SFTP

•SCP

•SSL

•TCP attack protection

•IP source guard

•ARP attack protection

•ND attack defense

•URPF

•MFF

09 High Availability Command

Reference

Covers high availability commands for managing failure detection

and failover. Failure detection technologies focus on fault detection

and isolation. Failover technologies focus on network recovery. This

command reference includes:

•Ethernet OAM

•CFD

•DLDP

•RRPP

•Smart Link

•Monitor Link

•VRRP

•BFD

•Track

Command Reference Content

10 Network Management and

Monitoring Command Reference

Covers the commands that help you manage and monitor your

network, for example, manage system events, sample packets, assess

network performance, synchronize the clock for all devices with the

clock in the network, and test network connectivity. This command

reference includes:

•Ping, tracert, and system debugging

•NTP

•Information center

•SNMP

•RMON

•Port mirroring

•Traffic mirroring

•NQA

•sFlow

•IPC

Autres manuels pour 6125G

Ce manuel convient aux modèles suivants

Autres manuels HP Changer

HP J4897A Manuel utilisateur

HP 8/20q Manuel utilisateur

HP 12500 Series Manuel utilisateur

HP Aruba JL253A Manuel utilisateur

HP ProCurve 5300xl Manuel de programmation

HP J9079A Manuel utilisateur

HP 34970A Manuel utilisateur

HP StorageWorks 16-EL - SAN Switch Mode d’emploi

HP AK241A - StorageWorks 8Gb Simple SAN... Manuel d'installation et d'exploitation

HP 1920 Gigabit Ethernet Switch Series Manuel utilisateur

HP ProCurve 6120G/XG Manuel utilisateur

HP GbE2c Manuel utilisateur

HP zl Manuel utilisateur

HP ProLiant BL p-Class GbE2 Manuel d'utilisation

HP 6125G Manuel d'installation

HP 2600-PWR Series Manuel utilisateur

HP StorageWorks 7110 - Virtual Array Manuel utilisateur

HP 5920 Manuel utilisateur

HP JD318B Instructions de montage

HP ProCurve 1810G Manuel utilisateur

HP JG303A Instructions d'installation

HP HP 2530 Guide de configuration

HP ProCurve 1600M Manuel utilisateur

HP PROCURVE 2910AL Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur