HP ProCurve 8116fl Instructions de montage

Product End-of-Life Disassembly Instructions

Product Category: Networking Equipment

Marketing Name / Model

[List multiple models if applicable.]

ProCurve 8116fl Redundant Switch Fabric Module (J8730A)

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA) With a surface greater than 10 sq cm

1 in product, 1

Batteries All types including standard alkaline and lithium coin

or button style batteries 0

Mercury-containing components For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries 0

Liquid Crystal Displays (LCD) with a surface greater

than 100 sq cm Includes background illuminated displays with gas

discharge lamps 0

Cathode Ray Tubes (CRT) 0

Capacitors / condensers (Containing PCB/PCT) 0

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height

External electrical cables and cords 0

Gas Discharge Lamps 0

Plastics containing Brominated Flame Retardants 0

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent

chambers, and service stations. 0

Components and waste containing asbestos 0

Components, parts and materials containing

refractory ceramic fibers 0

Components, parts and materials containing 0

EL-MF877-00 Page 1

Template Revision A

EL-MF877-00 Page 2

Template Revision A

radioactive substances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description Tool Size (if

applicable)

Philips Head Screw Driver # 2

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Carefully detach the cable that is connecting the LEDs on one end of the bulkhead and the PCA on the other end.

Refer to Picture 1 for more details.

2. Remove the screws securing the bulkhead to PCA using a Philips screw driver (4 per for J8730A).

3. Remove the EMI gasket from the top (1 per) and the side (2 per) of the bulkhead. Refer to Picture 2 for more details.

4. Remove the screws securing the clip to heat sink using a Philips screw driver (24 per for J8730A). Refer to Picture 3

for more details

5. Separate the clip (12 per for J8730A) & standoff (24 for J8730A) from the heat sink.

6. Remove the screws securing the guide pins to the PCA using a Philips screw driver (3 per for J8730A). Refer to

Picture 4 for more details.

7. Separate the guide pins, heat sink, clip, standoff, EMI gasket, cable, PCA and bulkhead

10. .

11.

12.

13.

14.

15.

16.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

Picture 1

Picture 2

EL-MF877-00 Page 3

Template Revision A

Picture 3

Picture 4

EL-MF877-00 Page 4

Template Revision A

Table des matières

Autres manuels HP Matériel réseau

HP X1600 - StorageWorks Network Storage System 5.4TB SAS Model NAS... Comment utiliser

HP FF 12904E Instructions d'installation

HP ARUBA 8320 48 10/6 40 X472 5 2 Bdl Instructions de montage

HP Mv2120 - Media Vault Network Drive Manuel utilisateur

HP IBRIX X9720 Manuel de service

HP ProCurve Radio Port 230 Instructions de montage

HP Enterprise Aruba 7210 Instructions de montage

HP 10:10 LAN Bridge MB Manuel d'installation et d'exploitation

HP 16-port SCS Manuel utilisateur

HP VMA Series Feuille d'instructions

HP HP 16500 Instructions d'installation et d'entretien

HP procurve radio port 220 Instructions de montage

HP Bc1500 - BladeSystem - Blade PC Manuel

HP Aruba 640 Instructions de montage

HP Deskjet 870 Manuel utilisateur

HP Wireless LAN 802.11b/g Device WN4201B Manuel utilisateur

HP AHA-8940 Manuel utilisateur

HP 5900AF-48XG-4QSFP+ Instructions de montage

HP StorageWorks 1/8 Tape Autoloader Manuel utilisateur

HP HSR6602-G Instructions d'installation

HP Compaq NC6133 Instructions d'utilisation

HP 85027A Manuel de service

HP 5500-24G-SFP EI TAA Instructions de montage

HP Surestore Disk Array 12h - And FC60 Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur