HP 37718A OmniBER 718 Manuel d'installation et d'exploitation

HP 37718A/37719A

Communications

Performance Analyzer

Installation and

Veriﬁcation

Manual

Hewlett-Packard Limited

Telecommunications Networks Test Division

South Queensferry

West Lothian, Scotland EH30 9TG

Copyright Hewlett-

Packard Ltd.1998

Reproduction, adaption, or

translation without prior

written permission is

prohibited, except as

allowed under the

HP Part No. 37718-90006

First Edition, October 98

Printed in U.K.

Documentation

Warranty

The information contained

in this document is subject

to change without notice.

Hewlett-Packard makes no

warranty of any kind with

regard to this material,

including, but not limited

to, the implied warranties

or merchantability and

ﬁtness for a particular

purpose.

Hewlett-Packard shall not

be liable for errors

contained herein or for

incidental or consequential

damages in connection

with the furnishing,

performance, or use of this

material.

WARNING

For details of safety, see

Safety information in this

manual.

Installation and Veriﬁcation Manual

HP 37718A/37719A

Communications Performance

Analyzer

HP Part Number 37718-90006

Printed in U.K.October 1998

Contents

iii

1 General Information

Warranty 1-1

Responsibilities of the Customer 1-2

Certiﬁcation 1-3

Assistance 1-3

Notice 1-3

Restricted Rights Legend 1-3

Instruments Covered By Manual 1-4

Storage and Shipment 1-4

Repackaging for Shipment 1-4

Weight and Dimensions 1-5

Safety Precautions for the Operator 1-6

Lifting/Carrying the HP 37718A/19A 1-6

Safety Symbols 1-7

Operators Maintenance 1-8

Cleaning 1-8

Power Supply Fuse Replacement 1-9

Statement of Compliance 1-10

Australian EMC Regulations 1-10

Noise Declaration (German) 1-10

Electromagnetic Compatibility 1-11

Electrostatic Discharge 1-11

Speciﬁcations 1-14

2 Installation

Initial Inspection 2-1

Operating Environment 2-2

Preparation for Use 2-3

Power Requirements 2-3

Contents

Fuses 2-3

Fuse Replacement 2-3

Connecting to the Power Supply 2-4

Connecting to the Network 2-6

All Connectors 2-6

Electrical Interface Connectors 2-6

Optical Interface Connectors 2-9

Connecting Accessories 2-11

10 Base-T Lan Connection Radiated Emissions 2-11

Hewlett-Packard Interface Bus 2-12

Additional Precautions for Service Engineers 2-14

Safety Precautions 2-14

ESD Precautions 2-14

3 Performance Tests

Introduction 3-1

Equipment Required 3-1

Performance Test Record 3-1

Calibration Cycle 3-1

Recall Default Settings 3-1

Self Test 3-3

Description 3-3

PDH/DSn Internal Transmitter Clock Accuracy & Offset 3-8

Speciﬁcations 3-8

Description 3-8

Equipment Required 3-8

Procedure 3-9

E1 (2.048Mb/s) Frequency Accuracy 3-9

E2 (8.448Mb/s) Frequency Accuracy 3-10

E3 (34.368Mb/s) Frequency Accuracy 3-10

E4 (139.264Mb/s) Frequency Accuracy 3-11

Contents

DS1 (1.544Mb/s) Frequency Accuracy 3-11

DS3 (44.736Mb/s) Frequency Accuracy 3-12

PDH/DSn Transmitter Output 3-13

Speciﬁcation 3-13

Description 3-13

Equipment Required 3-14

Procedure 3-14

Procedure - 34.368 Mb/s 3-17

Procedure - 8.448 Mb/s 3-19

Procedure - 2.048 Mb/s 3-21

Procedure - DSX-3 3-23

Procedure - DSX-1 3-25

PDH/DSn Receiver Equalization 3-29

Speciﬁcations 3-29

Description 3-29

Equipment Required 3-29

Procedure 3-30

PDH/DSn Receiver Monitor Levels 3-33

Speciﬁcations 3-33

Description 3-33

Equipment Required 3-33

Procedure 3-34

External Mux/Demux 3-38

Speciﬁcations 3-38

Description 3-38

Equipment Required 3-38

Procedure 3-39

PDH/DSn Frequency Measurement and Looped Clock 3-47

Speciﬁcations 3-47

Description 3-47

Equipment Required 3-47

Procedure 3-47

SDH/SONET Transmitter Clock Accuracy 3-51

Contents

Speciﬁcation 3-51

Description 3-51

Equipment Required 3-51

Procedure 3-51

External Clock/Data Reference Inputs & Clock Reference Output 3-

Speciﬁcations 3-52

Description 3-52

Equipment Required 3-52

Procedure 3-53

SDH/SONET Frequency Offsets 3-57

Speciﬁcations 3-57

Description 3-57

Equipment Required 3-57

Procedure 3-57

STM-0/STS-1 Transmitter Output Waveshape 3-59

Speciﬁcations 3-59

Description 3-59

Equipment Required 3-59

Procedure 3-59

STM-1/STS-3 Transmitter Output Waveshape 3-62

Speciﬁcations 3-62

Description 3-62

Equipment Required 3-62

Procedure 3-62

SDH/SONET Receiver Equalization 3-66

Speciﬁcations 3-66

Description 3-66

Equipment Required 3-66

Procedure 3-66

Procedure 3-67

SDH/SONET Receiver Monitor Levels 3-68

Speciﬁcations 3-68

Contents

vii

Description 3-68

Equipment Required 3-68

Procedure 3-68

Multirate Optical Interfaces 3-71

Speciﬁcation (1310 nm Transmitter) 3-71

Speciﬁcation (1550 nm Transmitter) 3-71

Speciﬁcation (Receiver) 3-71

Description 3-72

Equipment Required 3-72

Performance Test Record 3-77

4 Terms

ITU-T / ANSI Equivalent Terms 4-1

Current / Previous Terminology 4-3

viii

Contents

Autres manuels pour 37718A OmniBER 718

Ce manuel convient aux modèles suivants

Table des matières

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur