HP 16555A Manuel utilisateur

Service Guide

Publication number 16555-97012

First edition, October 1996

For Safety information, Warranties, and Regulatory

information, see the pages at the end of the book.

Copyright Hewlett-Packard Company 1987–1996

HP 16555A/D 110-MHz State/

500-MHz Timing Logic Analyzers

Printed in USA July 2004

Notice

Hewlett-Packard to Agilent Technologies Transition

This manual may contain references to HP or Hewlett-Packard. Please note that Hewlett-

Packard’s former test and measurement, semiconductor products and chemical analysis

businesses are now part of Agilent Technologies. To reduce potential confusion, the only

change to product numbers and names has been in the company name prefix: where a

product name/number was HP XXXX the current name/number is now Agilent XXXX. For

example, model number HP8648 is now model number Agilent 8648.

Contacting Agilent Sales and Service Offices

The sales and service contact information in this manual may be out of date. The latest

service and contact information for your location can be found on the Web at:

http://www.agilent.com/find/assist

If you do not have access to the Internet, contact your field engineer or the nearest sales

and service office listed below. In any correspondence or telephone conversation, refer to

your instrument by its model number and full serial number.

United States

(tel) 1 800 452 4844

(fax) 1 800 829 4433

Latin America

(tel) (305) 269 7500

(fax) (305) 269 7599

New Zealand

(tel) 0 800 738 378

(fax) 64 4 495 8950

Canada

(tel) +1 877 894 4414

(fax) +1 888 900 8921

Japan

(tel) (81) 426 56 7832

(fax) (81) 426 56 7840

Asia Pacific

(tel) (852) 3197 7777

(fax) (852) 2506 9284

Europe

(tel) (31 20) 547 2323

(fax) (31 20) 547 2390

Australia

(tel) 1 800 629 485

(fax) (61 3) 9210 5947

HP 16555A/D 110-MHz State/500-MHz Timing

Logic Analyzers

The HP 16555A/D are 110-MHz State/500-MHz Timing Logic Analyzer modules for

the HP 16500B/C Logic Analysis Systems. The HP 16555A/D offer high performance

measurement capability. The HP 16555D has twice the memory depth of the

HP 16555A.

Features

Some of the main features of the HP 16555A/D are as follows:

•64 data channels

•4 clock/data channels

•1016K memory depth per channel for the HP 16555A, 2032K memory depth per

channel for the HP 16555D

•110 MHz maximum state acquisition speed

•500 MHz maximum timing acquisition speed

•Expandable to 204 channels

Service Strategy

The service strategy for this instrument is the replacement of defective assemblies.

This service guide contains information for finding a defective assembly by testing

and servicing the HP 16555A/D state and timing analyzer modules.

This module can be returned to Hewlett-Packard for all service work, including

troubleshooting. Contact your nearest Hewlett-Packard Sales Office for more details.

The HP 16555A/D Logic Analyzer

iii

In This Book

This book is the service guide for the HP 16555A/D 110-MHz State/500-MHz Timing Logic

Analyzer module. Place this service guide in the 3-ring binder supplied with your

HP 16500B Logic Analysis System Service Manual or HP 16500C Logic Analysis System

Service Manual.

This service guide is divided into eight chapters.

Chapter 1 contains information about the module and includes accessories for the module,

specifications and characteristics of the module, and a list of the equipment required for

servicing the module.

Chapter 2 tells how to prepare the module for use.

Chapter 3 gives instructions on how to test the performance of the module.

Chapter 4 contains calibration instructions for the module.

Chapter 5 contains self-tests and flowcharts for troubleshooting the module.

Chapter 6 tells how to replace the module and assemblies of the module and how to return

them to Hewlett-Packard.

Chapter 7 lists replaceable parts, shows an exploded view, and gives ordering information.

Chapter 8 explains how the analyzer works and what the self-tests are checking.

Contents

1 General Information

Accessories 1-2

Operating System 1-2

Specifications 1-3

Characteristics 1-4

Supplemental Characteristics 1-4

Recommended Test Equipment 1-7

2 Preparing For Use

To inspect the module 2-2

To prepare the mainframe 2-3

To configure a one-card module 2-4

To configure a multicard module 2-5

To install the module 2-10

To turn on the system 2-11

To test the module 2-11

To install the ferrites 2-12

3 Testing Performance

To perform the self-tests and make the test connectors 3-3

To test the threshold accuracy 3-9

To test the single-clock, single-edge, state acquisition 3-18

To test the multiple-clock, multiple-edge, state acquisition 3-30

To test the single-clock, multiple-edge, state acquisition 3-41

To test the time interval accuracy 3-51

To perform the multicard test 3-57

Performance Test Record 3-67

4 Calibrating

5 Troubleshooting

To use the flowcharts 5-2

To run the self-tests 5-7

To run the Board Verification tests 5-8

To run the Acquisition IC Verification tests 5-10

To test the cables 5-13

To test the auxiliary power 5-17

6 Replacing Assemblies

To remove the module 6-2

To replace the circuit board 6-3

To replace the module 6-3

To replace the probe cable 6-5

To replace the Reference Clock cable 6-6

To return assemblies 6-7

7 Replaceable Parts

Replaceable Parts Ordering 7-2

Replaceable Parts List 7-3

Exploded View 7-5

8 Theory of Operation

Block-Level Theory 8-2

Self-Tests Description 8-6

Contents

Accessories 1-2

Operating System 1-2

Specifications 1-3

Characteristics 1-4

Supplemental Characteristics 1-4

Recommended Test Equipment 1-7

General Information

This chapter lists the accessories, the specifications and characteristics, and the

recommended test equipment.

Accessories

The following accessories are supplied with the HP 16555A/D Logic Analyzer.

Accessories Supplied HP Part Number

Probe Tip Assembly, Qty 4 01650-61608

Grabbers, Qty 4 packages 5090-4356

Extra Probe Leads, Qty 1 package 5959-9333

Extra Probe Grounds, Qty 4 packages 5959-9334

Probe Cables, Qty 2 16555-61606

Probe Cable and Pod Labels, Qty 1 01650-94310

Double Probe Adapter, Qty 1 16542-61607

Ferrite Core Assembly, Qty 2 16555-60001

Accessories Available

The accessories available for the HP 16555A/D are listed in the Accessories for HP Logic

Analyzers brochure.

Operating System

With HP 16500B Mainframe

The HP 16555D Logic Analyzer requires operating system version v3.10 or higher.

For the HP 16555A, the version of the operating system software depends on the

programmable logic device that is the CPU interface. To verify the version of the

programmable device, first locate the device, which is at the front of the HP 16555A board. If

the programmable device has part number 16555-80001, then the device requires operating

system version v2.xx, and the maximum state acquisition speed is 100 MHz. If the device has

part number 16555-80002 or higher, then the device requires operating system v3.00 or

higher, and the maximum state acquisition speed is 110 MHz for single-clock, single-edge

clocking mode. You should always use the latest release, and must use version numbers that

are compatible with your device.

With HP 16500C Mainframe

The HP 16555A/D Logic Analyzer requires operating system version v1.00 or higher.

1–2

Specifications

The specifications are the performance standards against which the product is tested.

Minimum State Clock Pulse Width 13.5 ns

Threshold Accuracy ±(100 mV + 3% of threshold setting)

Clock Scheme:

Single Clock, Single Edge:

Setup/Hold Time: 1 0.0/3.5 ns through 3.5/0.0 ns,

adjustable in 500-ps increments

Maximum State Speed 110 MHz 2

Minimum Master-to-Master Clock Time 19.09 ns 2

Single Clock, Multiple Edges:

Setup/Hold Time: 1 0.0/4.0 ns through 4.0/0.0 ns,

adjustable in 500-ps increments

Maximum State Speed 100 MHz

Minimum Master-to-Master Clock Time 110.0 ns

Multiple Clocks, Multiple Edges:

Setup/Hold Time: 1 0.0/4.5 ns through 4.5/0.0 ns,

adjustable in 500-ps increments

Maximum State Speed 100 MHz

Minimum Master-to-Master Clock Time 110.0 ns

1Specified for an input signal VH = −0.9 V, VL = −1.7 V, and threshold = −1.3 V.

2An HP 16555A in an HP 16500B mainframe using operatingsystem v2.xx has maximum state speed of 100MHz andminimum

Master-to-Master Clock Time of 10.0 ns for single-clock, single-edge clocking. 110-MHz single-clock state acquisition mode is

available withHP 16500B mainframe operating system v3.00 or higher orHP 16500C mainframeoperatingsystem v1.00 or higher

(refer to "Operating System"). The maximum state acquisition speedis 100 MHz for all other clocking modes.

General Information

Specifications

1–3

Ce manuel convient aux modèles suivants

Table des matières

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur