HP Vectra VL5 5 Manuel

Autres manuels pour Vectra VL5 5

4

Ce manuel convient aux modèles suivants

28

Table des matières

Autres manuels HP Ordinateur de bureau

HP

HP Visualize J5000 Guide de démarrage rapide

HP

HP 24 Instructions de montage

HP

HP Z1 G2 Manuel

HP

HP dc72 - Blade Workstation Client Instructions d'installation et d'entretien

HP

HP Xw6400 - Workstation - 4 GB RAM Instructions d'utilisation

HP

HP Pavilion u600 - Desktop PC Manuel utilisateur

HP

HP 1028705233 Manuel utilisateur

HP

HP Pavilion t400 - Desktop PC Instructions d'installation

HP

HP Xw8400 - Workstation - 4 GB RAM Manuel utilisateur

HP

HP A1210n - Pavilion - 512 MB RAM Guide de démarrage rapide

HP

HP Pavilion Elite m9280f Manuel utilisateur

HP

HP Compaq D315 Manuel d'utilisation et d'entretien

HP

HP Z600 - Workstation - 6 GB RAM Manuel utilisateur

HP

HP -380467-003 - COMPAQ PRESARIO C300 C500 C700 F500 F700 LAPTOP... Manuel utilisateur

HP

HP Model 747i - Workstation Guide de référence

HP

HP Pavilion u700 - Desktop PC Manuel utilisateur

HP

HP Pavilion t306cn Manuel utilisateur

HP

HP Pavilion p6710f Manuel utilisateur

HP

HP Compaq Pro 6300 All-in-One Instructions d'utilisation

HP

HP dc7900 - Convertible Minitower PC Manuel utilisateur

HP

HP Pavilion u501cl Manuel utilisateur

HP

HP s3650f - Pavilion - Slimline Manuel utilisateur

HP

HP Brio BA200 Manuel utilisateur

HP

HP Compaq Presario Manuel

Manuels Ordinateur de bureau populaires d'autres marques

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur

Everex

Everex eXplora Manuel utilisateur

Lenovo

Lenovo ThinkCentre M75e Manuel utilisateur

Dell

Dell Alienware Area-51 R4 Manuel utilisateur

SCSIAdministrator’s

Guide

HP Kayak PC

Workstations

HP Vectra PCs

SCSI Administrator’s

Guide

scsi-ag.bk : cover.fb4 Page 1 Tuesday, September 15, 1998 2:25 PM

Notice

The information contained in this document is subject to change without

notice.

Hewlett-Packard makes no warranty of any kind with regard to this material,

including, but not limited to, the implied warranties of merchantability and

fitness for a particular purpose. Hewlett-Packard shall not be liable for errors

containedhereinorforincidentalorconsequentialdamagesinconnectionwith

the furnishing, performance, or use of this material.

Hewlett-Packard assumes no responsibility for the use or reliability of its

software on equipment that is not furnished by Hewlett-Packard.

Thisdocumentcontainsproprietaryinformationthatisprotectedbycopyright.

All rights are reserved. No part of this document may be photocopied,

reproduced, or translated to another language without the prior written

consent of Hewlett-Packard Company.

Adaptec® is a registered trademark of Adaptec, Inc.

Microsoft®, MS®, MS-DOS®, Windows®, and Windows NT® are U.S.

registered trademark of Microsoft Corporation.

Netscape® is a trademark of Netscape Communications Corporation.

PentiumTM is a trademark of Intel Corporation.

SCSISelectTM is a trademark of Adaptec Incorporated.

Hewlett-Packard France

Commercial Computing Operation

38053 Grenoble Cedex 9

France 1998 Hewlett-Packard Company

scsi-ag.bk : notice.fb4 Page ii Tuesday, September 15, 1998 2:25 PM

SCSI Administrator’s Guide

scsi-ag.bk : title.fb4 Page iii Tuesday, September 15, 1998 2:25 PM

iv English

Who This Manual Is For

This manual is for anyone who wants to:

•Add a SCSI accessory to their PC.

•Configure a SCSI accessory in an HP PC.

Important Safety Information

WARNING If you have any doubt that you can lift the PC or display safely, do not

try to move it without help.

For your safety, always connect the equipment to a grounded wall

outlet. Always use a power cord with a properly grounded plug, such

as the one provided with this equipment, or one in compliance with

your national regulations. This PC is disconnected from the power by

removing the power cord from the power outlet. This means the PC

must be located close to a power outlet that is easily accessible.

For your safety, never remove the PC’s cover without first removing

the power cord from the power outlet, and any connection to a

telecommunications network. Always replace the cover on the PC

before switching it on again.

To avoid electric shock, do not open the power supply. There are no

user-serviceable parts inside.

This HP PC is a class 1 laser product. Do not attempt to make any

adjustment to the laser units.

scsi-ag.bk : title.fb4 Page iv Tuesday, September 15, 1998 2:25 PM

English 1

Configuring the SCSI Bus

Configuring the SCSI Bus

You can configure your PC’s SCSI bus using the SCSISelect utility. This

utility is for use with Internal Wide 16-bit SCSI devices.

Using SCSI Select

ATTENTION The SCSISelect™utility is intended for advanced users only.

Note that the SCSISelect option displayed on your screen may

be different to the one described here.

The SCSISelect utility is accessed by pressing <Ctrl><A> during the

computer’sstart-upprocesswhenthe messagePress <Ctrl><A> for

SCSISelect(TM) Utility! is displayed.

The Options menu is displayed.

Use the and keys and the key to make selections in

the SCSISelect utility. Press at any time to return to the previous

menu.

SCSISelect(TM) Utility v1.xxx

Would you like to configure the host adapter, or run the

SCSI disk utilities? Select the option and press <Enter>.

Press <F5> to switch between color and monochrome modes.

Options

Configure/View Host Adapter Settings

SCSI Disk Utilities

Arrow keys to move cursor, <Enter> to select option, <Esc> to exit

scsi-ag.bk : scsiadm.fb4 Page 1 Tuesday, September 15, 1998 2:25 PM

Configuring the SCSI Bus

2English

Configure/View

InterfaceSettingsMenu It is recommended that you do not change these settings.

SCSI Channel Interface Definitions:

•Host Adapter SCSI ID

Changes the adapter SCSI ID from its default value of 7.

•SCSI Parity Checking

Enable or disable host adapter SCSI parity checking. Most currently

available SCSI devices do support SCSI parity. You should disable

SCSI Parity Checking if any of the attached SCSI devices do not

support SCSI parity.

•Host Adapter SCSI Termination

It is recommended that you leave this field on its default setting of

Automatic. This way, if the host adapter detects a SCSI device

connected to either its internal or external connectors, then it

enables its terminators (the adapter is at the end of the SCSI bus). If

the host adapter detects devices connected to both its internal and

external connectors, then it disables its terminators.

SCSISelect(TM) Utility v1.xxx

Configuration

SCSI Bus Interface Definitions

Host Adapter SCSI ID . . . . . . . . . . . . . . 7

SCSI Parity Checking . . . . . . . . . . . . . . Enabled

Host Adapter SCSI Termination ...................Automatic

Additional Options

Boot Device Options . . . . . . . . . . . . . . Press <Enter>

SCSI Device Configuration . . . . . . . . . . . Press <Enter>

Advanced Configuration Options . . . . . . . . . Press <Enter>

<F6> - Reset to Host Adapter Defaults

BIOS Information

Interrupt (IRQ) Channel . . . . . . . . . . . . . . 15

I/O Port Address . . . . . . . . . . . . . . . . . F800h

scsi-ag.bk : scsiadm.fb4 Page 2 Tuesday, September 15, 1998 2:25 PM

English 3

Configuring the SCSI Bus

Additional Options:

•Boot Device Options

Press to display the Boot Device Configuration menu,

described on the next page.

•SCSI Device Configuration

Press to display the SCSI Device Configuration menu.

•Array 1000 BIOS (only if HP FastRAID is installed)

Thisoptionisenabledbydefault,andinstructsthesystem to use the

special BIOS for the FastRAID option.

•Advanced Configuration Options

Press to view the Advanced Configuration Options menu.

Boot Device

Configuration Menu This menu lets you configure the SCSI boot device. To find out the

SCSI ID of a specific SCSI device, you can run the SCSI Disk Utilities

(refer to page 7).

Use the and keys to move between options. Press to

display a menu with a selection of values.

•Boot SCSI ID

This parameter is the SCSI ID of the boot device. The default value

is 0.

•Boot Lun Number

More advanced SCSI devices can have several logical units. This

option indicates the logical unit (or Lun) on which to boot for the

drive chosen in the Boot SCSI ID. The default value is 0.

Use the HP Setup program to select the boot device. You enter Setup

by pressing F2 during startup.

Boot Device Configuration

Select SCSI peripheral from which to boot

To view peripheral by ID# select “SCSI Disk Utilities” from previous menu

Boot SCSI ID ................................................. 0

Option Listed Below Has NO EFFECT if MULTI LUN Support is Disabled

Boot LUN Number .............................................. 0

Boot Device Configuration

Option Listed Below Has NO EFFECT if MULTI LUN Support is Disabled

scsi-ag.bk : scsiadm.fb4 Page 3 Tuesday, September 15, 1998 2:25 PM

Configuring the SCSI Bus

4English

SCSI Device

Configuration Menu This menu lets you configure parameters for each SCSI device on the

SCSI bus. To configure a specific SCSI device, you need to know which

SCSI ID it uses. To know the SCSI ID of a specific SCSI device, you can

run the SCSI Disk Utilities (refer to page 7).

Use the and keys to move between options. Press to

display a menu with a selection of values.

•Initiate Sync Negotiation

Some older SCSI-1 devices do not support synchronous negotiation.

Set Initiate Sync Negotiation to No for these devices.

•Maximum Sync Transfer Rate

If the SCSI device is an UltraWide SCSI device, you can use the

maximum value of 40.0 MB per second. For Ultra narrow SCSI or

Wide SCSI devices you can select a maximum transfer rate of 20.0

MB per second.

Certain older SCSI-1 devices do not support UltraWide SCSI (up to

40 MB per second) or Ultra narrow SCSI or Wide SCSI data transfer

rates (up to 20 MB per second). Select a Maximum Sync Transfer

Rate of 10.0 MB per second for these devices.

SCSI Device Configuration

SCSI Device ID #0 #1 #2 #3 #4 #5 #6 #7

Initiate Sync Negotiation... yes yes yes yes yes yes yes yes

Maximum Sync Transfer Rate.. 40.0 40.0 40.0 40.0 40.0 40.0 40.0 40.0

Enable Disconnection........ yes yes yes yes yes yes yes yes

Initiate Wide Negotiation... yes yes yes yes yes yes yes yes

Options Listed Below Have NO EFFECT if the BIOS is Disabled

Send Start Unit Command.... no no no no no no no no

BIOS Multiple LUN Support.. no no no no no no no no

Include in BIOS Scan....... yes yes yes yes yes yes yes yes

SCSI Device ID #8 #9 #10 #11 #12 #13 #14 #15

Initiate Sync Negotiation... yes yes yes yes yes yes yes yes

Maximum Sync Transfer Rate.. 40.0 40.0 40.0 40.0 40.0 40.0 40.0 40.0

Enable Disconnection........ yes yes yes yes yes yes yes yes

Initiate Wide Negotiation... yes yes yes yes yes yes yes yes

Options Listed Below Have NO EFFECT if the BIOS is Disabled

Send Start Unit Command.... no no no no no no no no

BIOS Multiple LUN Support.. no no no no no no no no

Include in BIOS Scan....... yes yes yes yes yes yes yes yes

SCSI Device Configuration

scsi-ag.bk : scsiadm.fb4 Page 4 Tuesday, September 15, 1998 2:25 PM

English 5

Configuring the SCSI Bus

It is strongly recommended that you switch the Maximum Sync

Transfer Rate to 20 MB per second when connecting an external

SCSI device.

•Enable Disconnection

To optimize SCSI bus performance, Enable Disconnection should be

set to Yes.

•Initiate Wide Negotiation

This option determines whether the SCSI channel attempts 16-bit

data transfer instead of 8-bit data transfer.

•Send Start Unit Command

When set to Yes this option reduces the load on your computer’s

power supply by allowing the interface to power-up SCSI devices

one-at-a-time when you start your computer.

This option is not supported by some SCSI devices. Some SCSI

devices require a jumper to be changed before they can respond to

this command.

•BIOS Multiple LUN Support

More advanced SCSI devices can have several logical units (LUN).

This option determines whether booting a SCSI device that has

multipleLUNsissupported.SetthisoptiontoYes ifyourbootdevice

has multiple LUNs. It is set to no by default.

•Include in BIOS Scan

Thissetting,when settoYes,allowstheSCSIdevicetobe controlled

by the host adapter with this SCSI ID. When set to No, the adapter

does not control the SCSI device.

scsi-ag.bk : scsiadm.fb4 Page 5 Tuesday, September 15, 1998 2:25 PM

Configuring the SCSI Bus

6English

AdvancedConfiguration

Options Menu It is recommended that these settings are not changed.

Use the and keys to move between options. Press to

display a menu with a selection of values.

•Plug and Play Scam Support

When enabled, this option automatically configures Plug and Play

compatible SCSI devices. For SCSI devices that do not support Plug

and Play, set this option to Disabled. By default, it is enabled.

•Extended BIOS Translation for DOS Drives >1 GByte

This option is no longer used (and must always be “Enabled”).

•Reset SCSI Bus at IC Initialization

When the SCSI controller receives an IC Reset command from the

central processor, it can reset either itself and the SCSI bus, or just

itself. By default, it will reset both itself and the SCSI bus.

•Host Adapter BIOS

This option enables or disables the SCSI Adapter BIOS. Several

options in SCSISelect utility are only valid if the SCSI adapter BIOS

is enabled. The SCSI adapter BIOS must be enabled if the computer

boots from a SCSI hard disk drive. This option is enabled by default.

•Support Removable Disks Under BIOS as Fixed Disks

When Boot Only is selected, only the removable media drive

designated as the boot device is treated as a hard disk drive.

If All Disks is selected, all removable-media drives supported by

theBIOS are treated ashard disk drives. Noremovable-media drives

are treated as hard disk drives when Disabled is selected. In this

case, removable-media drives must be controlled through operating

system drivers.

Advanced Configuration Options

Plug and Play Scam Support ....................................Disabled

Extended BIOS Translation for DOS Drives > 1 GByte ............ Enabled

Reset SCSI Bus at IC Initialization............................ Enabled

Options Listed Below Have NO EFFECT if the BIOS is Disabled

Host Adapter BIOS (Configuration Utility Reserves BIOS Space).. Enabled

Support Removable Disks Under BIOS as Fixed Disks.............. Boot Only

Display F6 Message During BIOS Initialization.................. Enabled

BIOS Support for Bootable CD-ROM................................Enabled

BIOS Support for Int13 Extensions.............................. Enabled

scsi-ag.bk : scsiadm.fb4 Page 6 Tuesday, September 15, 1998 2:25 PM