HP Model 745 - VME Workstation Manuel utilisateur

Model 745 Industrial Controller

Owner’s Guide

This guide contains installation instructions

HP Part No. A4964-90605

Edition E1199

Printed in U.S.A.

Hewlett-Packard Co. 1999

Printing History

First Printing: June 1998

Latest Printing: November 1999

UNIX is a registered trademark of The Open Group.

NOTICE

The information contained in this document is subject to change without

notice.

HEWLETT-PACKARD MAKES NO WARRANTY OF ANY KIND

WITH REGARD TO THIS MATERIAL INCLUDING BUT NOT LIM-

ITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall

not be liable for errors contained herein or for incidental or consequential

damages in connection with the furnishing, performance or use of this mate-

rial.

Hewlett-Packard assumes no responsibility for the use or reliability of its

software on equipment that is not furnished by Hewlett-Packard.

This document contains proprietary information that is protected by copy-

reproduced or translated to another language without the prior written con-

sent of Hewlett-Packard Company.

RESTRICTED RIGHTS LEGEND. Use, duplication, or disclosure by gov-

ernment is subject to restrictions as set forth in subdivision (c) (1) (ii) of the

Rights in Technical Data and Computer Software Clause at DFARS

252.227.7013. Hewlett-Packard Co., 3000 Hanover St., Palo Alto, CA

94304.

10 9 8 7 6 5 4 3 2 1

Contents

Audience Preface-ii

Release Document(s) Preface-ii

Related Manuals Preface-ii

Revision History Preface-iii

Documentation Conventions Preface-iv

Questions, Suggestions, or Problems Preface-v

1 Product Description

The Model 745 Industrial Controller 1-3

Features 1-5

Physical Dimensions and Power Requirements 1-7

Board Computer Configurations 1-8

Cables 1-9

Environmental Requirements 1-10

Operating System Overview 1-11

Manuals for System Information 1-12

Online Sources of Information 1-13

Audio 1-14

2 Connecting Cables

Introduction 2-3

Contents

Connecting a Monitor or Text-Only Terminal 2-4

Configuration Requirements 2-4

Connecting the Monitor 2-4

Monitor Power Cord 2-5

Connecting a Terminal 2-7

Audio Connection 2-8

Video Connection 2-11

Keyboard and Mouse Connections 2-12

SCSI Connections 2-13

Network Connection 2-16

Printer Connections 2-18

Preparing for HP-UX Installation 2-18

Configuring HP-UX for a Printer 2-18

Installation Procedure 2-19

Testing the Printer Installation 2-21

HP Parallel 2-21

RS-232 Port A 2-23

3 Power-On/Power-Off

Powering On the System 3-3

Powering Off the System 3-7

Using SAM to Stop the HP-UX System 3-8

Using the Command Line 3-8

4 Processor Options Installation

Tools Required and Preliminary Procedures 4-3

Tools Required for Installation 4-3

Contents

iii

Preliminary Procedures 4-3

Safety Precautions 4-4

Removing the Processor Board 4-5

Memory 4-6

Preliminary Requirements 4-6

RAM Card Installation 4-6

RAM Card Removal 4-7

PMC Bridge Adapter and Expansion Adapter 4-8

Preliminary Requirements 4-8

PMC Bridge Adapter and Expansion Adapter Installation 4-8

5 EISA Card Installation

EISA Accessory Card Configuration Files 5-3

Hardware Installation 5-4

Tools Required 5-4

Procedure 5-4

6 PCI Card Installation

Hardware Installation 6-3

Tools Required 6-3

Procedure 6-3

7 Installing and Configuring Mass Storage Devices

Hardware Installation for Drives 7-3

Module Orientations 7-4

Contents

Finding the Status of Existing SCSI Bus Addresses 7-5

Installing Mass Storage Devices 7-6

Installing a Device in a Mass Storage Carrier 7-8

Configuring for a Hard Disk Drive 7-15

Software Installation of the Hard Disk Drive Upgrade 7-15

8 Using Mass Storage Devices

Using your CD-ROM Drive 8-2

CD-ROM Drive and CD-ROM Media Descriptions 8-3

CD-ROM Drive 8-3

CD-ROM Media 8-4

Operating the CD-ROM Drive 8-6

Loading and Unloading a CD-ROM in the Disc Tray 8-6

Verifying the CD-ROM Drive Operation 8-9

Mounting and Unmounting a CD-ROM Disc 8-11

Mounting a CD-ROM Disc Using SAM 8-11

Unmounting a CD-ROM Disc Using SAM 8-13

Reading the Busy Light 8-14

DDS Tape Drive and Data Cassette Descriptions 8-15

DDS Drive 8-15

Data Cassettes 8-19

Setting the Write-Protect Tab on a Data Cassette 8-20

Operating the DDS Tape Drive 8-22

Loading and Unloading a Data Cassette 8-22

Verifying the DDS Tape Drive Operation 8-23

Using Device Files 8-23

Archiving Data 8-24

Writing to a Data Cassette 8-24

Contents

Restoring Files from a Data Cassette to Your System 8-25

Listing the Files on a Data Cassette 8-25

Further Command Information 8-25

Ordering Information 8-27

Using the Floppy Diskette 8-28

Setting the Write-Protect Tab on a Diskette 8-28

Inserting and Removing a Diskette 8-29

Operating the Floppy Drive 8-30

Verifying the Floppy Drive Configuration 8-30

Using Device Files 8-30

Formatting a New Diskette 8-31

Transferring Data To and From a Floppy Diskette 8-31

Saving Files to a Floppy Diskette 8-32

Restoring Files from a Floppy Diskette to Your System 8-32

Listing the Files on a Floppy Diskette 8-33

For More Information 8-33

Configuring the Floppy Driver 8-34

Ordering Information 8-35

9 Dealing With Problems

Interpreting the LEDs 9-3

Managing a Boot Failure 9-5

Boot Program Initializes Hardware 9-5

Recovering from a System Panic 9-6

Procedures for Recovering from a System Panic 9-8

Dealing with Network Failures 9-12

Configuring the HP-UX Kernel 9-13

Contents

Declaration of Conformity A-3

Emissions Regulations and Statements A-4

Federal Communications Commission (FCC) A-4

VCCI Class A ITE A-5

A-5

Taiwan BCIQ Class A A-5

Emissions Regulations Compliance A-6

Acoustics A-7

Regulation On Noise Declaration For Machines -3. GSGV A-7

Electrostatic Discharge (ESD) Precautions A-8

Safety Statement A-9

Boot Console User Interface Features B-2

Main Menu B-3

Configuration Menu B-4

Information Menu B-5

Service Menu B-5

Accessing the Boot Console Interface B-6

Booting Your Workstation B-8

Searching for Bootable Media B-10

Restoring the Factory Default Configuration B-11

Displaying and Setting Paths B-12

Displaying and Setting the Monitor Type B-15

The Monitor Command B-15

Displaying the Current Monitor Configuration B-16

Setting the Monitor Type B-17

Setting the Monitor Type at Power On B-19

Contents

vii

Using the Emergency Interactive Console Search B-20

Displaying the Current Memory Configuration B-22

Memory Information Example B-22

Displaying the Status of the System I/O B-24

Setting the Auto Boot and Auto Search and Auto Start Flags B-25

Displaying and Setting the Security Mode B-27

Displaying and Setting the Fastboot Mode B-28

Displaying the LAN Station Address B-29

Displaying System Information B-30

Displaying PIM Information B-31

viii

Contents

Figures

Model 745 Front View 1-3

Model 745 Rear View 1-4

Board Computer Front Panel 1-4

Model 745 Front Panel Connectors 2-3

Connecting a Monitor 2-5

Connecting a Terminal to the RS-232 Ports 2-7

Audio Connector 2-10

Video Connector 2-11

PS/2 Connector 2-12

SCSI Cable 2-13

SCSI Connector 2-14

AUI LAN Connector 2-16

HP Parallel Connector 2-22

RS-232 Serial Connector 2-23

Power Supply Connector and Rear Switch 3-5

Front Power Switch 3-6

Removing the Board Computer Assembly 4-5

Installing RAM Cards 4-7

Installing a PMC Card onto the Bridge Adapter 4-8

Installing a PMC Card onto the Expansion Adapter 4-10

Removing Bridge Adapter Screws 4-11

Installing the Expansion Adapter onto the Bridge Adapter 4-12

Installing the PMC Bridge Adapter onto the Board Computer 4-13

Installing the Bridge Adapter / Expansion Adapter onto the Board Computer 4-13

Removing Ejector Handle Labels 4-15

Installing Ejector Handle Sleeves 4-16

Installing the Springs and Labels 4-17

Installing the Board Computer with PMC into Chassis 4-18

Autres manuels pour Model 745 - VME Workstation

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HP Ordinateur de bureau

HP Pavilion Media Center m8000 - Desktop PC Comment utiliser

HP M9340f - pavilion - elite Manuel d'instructions

HP Vectra VE 5/xx Series Manuel utilisateur

HP Vectra XA 6/xxx Comment utiliser

HP 290 G2 MT Business Instructions de montage

HP ENVY x360 Series Manuel

HP Workstation xw4100 Manuel

HP ProLiant ML350e Manuel utilisateur

HP dx6120 - Microtower PC Manuel d'utilisation et d'entretien

HP Pavilion t238d Manuel utilisateur

HP Brio BA410 Manuel utilisateur

HP Xw4200 - Workstation - 1 GB RAM Manuel d'utilisation et d'entretien

HP xw series Manuel utilisateur

HP Brio BA300 Manuel d'installation et d'exploitation

HP Engage Flex Pro-C Instructions d'installation

HP Vectra VEi 8 Manuel

HP Compaq dx2200 MT Series Manuel utilisateur

HP Pavilion Media Center m7700 - Desktop PC Comment utiliser

HP Kayak XW A2-U2-W2 Manuel utilisateur

HP Pavilion a1000 - Desktop PC Manuel utilisateur

HP 9020 CE Manuel utilisateur

HP Compaq Presario Manuel utilisateur

HP Xw8400 - Workstation - 4 GB RAM Manuel d'utilisation et d'entretien

HP Visualize J200 Manuel utilisateur

Manuels Ordinateur de bureau populaires d'autres marques

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur

Everex

Everex eXplora Manuel utilisateur

Lenovo

Lenovo ThinkCentre M75e Manuel utilisateur

Dell

Dell Alienware Area-51 R4 Manuel utilisateur