Honeywell HS-6270 Manuel utilisateur
User's Manual
Home System
for the safety and happiness of your home
To get the best use of the product, please
read the user's manual carefully before
using the product.
Keep the user's manual at an easily accessible
place and make it available to the next user.
HS-6270
The specification of product picture may vary the
model.
Accessing the fire/gas control test mode
※ Refer to page 16 for more details.
Press ,
Press ,
Press , to shift to fire test mode.
Press , to shift to gas test mode.
Safety Precautions
Usage Suggestions
2
5
Contents
Parts of HS-6270
Function Setting
Adjusting the Volume of the Bell
Adjusting the Brightness of the Screen
Setting the Safety Zone
Setting, Changing, Deleting, and Checking
the Password
Phone Call Function
Telephone Function
Answering the Phone
Talking to Someone at the Door
Taking Calls from the Door
Monitoring the Door
Interphone Function
Answering the Interphone
Making a Call over the Interphone
Reaching the Guard Post
Taking Calls from the Guard Post
How to Reach the Guard Post
Talking to Someone at the Common Entrance
Taking Calls from the Common Entrance
6
10
7
7
8
11
12
11
11
12
12
13
Setting, Changing, and Checking the Exit/Entry
Delay 9
Security and Alarm Functions
Away Mode
Reporting an Emergency
Deactivating the Emergency Alarm
Testing the Alarm Sound
14
15
16
Sleep (stay) Mode 14
Room Mode (deactivating the away and sleep modes)
In Case of Emergency
15
In Case of Fire or Gas Leakage
In Case the Security Alarm is Activated
15
16
Using the Camera
17
Troubleshooting
Product Specifications
Product Warranty
19
21
22
12
15
Making a Phone Call 11
Adjusting the Volume of the Phone 7
HS-6270 User's Manual / 1
Electronic Bullet Board Function
Saving Image Function 18
20
2 / Honeywell Co., Ltd.
To prevent property damage, make sure you have read the "Safety Precautions"
before using your system.
The following symbols denote the degree of damage that may arise in case of failure to
follow the specified precautions.
Indicates the serious damage or
even loss of life that may result
from failure to follow instructions.
Refers to injury or property damage
that may result from failure to follow
instructions.
Warning Caution
The following symbols denote the points that should be followed by the user.
Warning
"Prohibitory", meaning the
action being referred to
should never be taken.
Warning
"Mandatory", meaning you
should follow the
instructions indicated.
Do not disassemble at
any time (may result in
property damage or loss
of life).
Do not touch (may result
in property damage or
loss of life).
Warning Warning
Safety precautions
Keep the product away from moisture
(contact with moisture or other liquids
may cause fire, electric shock, or
malfunction).
If the panel comes into contact with
water, unplug the cord immediately
to avoid electric shock or fire.
Keep the product away from sources
of heat to avoid fire or malfunction.
When the alarm sounds, take
appropriate measures immediately.
Intrusion, fire, or gas leak may lead to
hazardous situations.
Warning
Do not disassemble or modify the
product (may lead to electric shock,
fire, or malfunction).
Do not use the product in places
exposed to inflammable gases or
debris such as propane gas or
gasoline (may cause explosion or fire).
Check the gas sensor monthly.
Replace it after 4 years.
Malfunction may result in hazardous
situations.
Replace the fire sensor every 2 years.
Malfunction may result in hazardous
situations.
HS-6270 User's Manual / 3
Safety precautions
4 / Honeywell Co., Ltd.
Caution
Safety precautions
Do not use benzene or other volatile
substances (may damage the product).
Do not place the product near large
TV's or speakers that generate strong
magnetic forces
(may cause malfunction).
Do not install on an unstable location
(may get detached and result in
breakdown or injury).
Keep away from direct sunlight.
Do not store in high-temperature
areas (may cause product deformation
or malfunction).
Keep out of reach of children
(product may cause injury).
Child users should be instructed on
the product's proper use. Adult
supervision is recommended to
avoid injury.
Do not apply shock or impact to the
product (may cause breakdown).
When the gas leak alarm sounds, perform the following steps.
1) Close the gas valve immediately and open the windows and doors to secure ventilation.
2) Do not unplug or plug in electrical devices.
3) Do not open the refrigerator.
4) When the gas is completely removed, check the gas appliance.
Usage suggestions
To get the best use of the product, take note of the following.
HS-6270 User's Manual / 5
1. When using the gas alarm and/or fire sensor, follow the manufacturer's instructions.
2. Make sure that the product is impervious to volatile gases to avoid sounding the fire alarm by
mistake.
3. In case of product breakdown, do not disassemble the body or sensor. Contact the vendor.
4. In case the main panel goes out of order, contact the vendor.
5. Use the emergency button only when necessary.
6. The product does not function during blackout or in case the circuit breaker is shut down.
7. To clean the product, use a soft cloth.
Do not use volatile liquids (i.e. benzene, thinner) or wet cloth to clean the product.
Function Lamp
Indicates the function setting status.
Stay Lamp
Indicates the stay setting status.
6 / Honeywell Co., Ltd.
※ The location of the lamps and specifications may vary by model.
Emergency Button/Lamp
Used in case of
emergencies; indicates the
emergency status.
Talk Button/Lamp
Used when talking over the telephone
and interphone.
Guard Button/Lamp
Used when calling the guard post
and common entrance.
Door Button/Lamp
Used when talking to someone at the door.
Test/Function (open)
Opens the door to the
entrance or common
entrance.
Microphone
Parts of HS-6270
Parts of the control panel
Away Button/Lamp
Sets your home to away
mode and indicates that the
system is in away status.
Speaker
Power Lamp
Fire/Gas Lamp
Signals a fire/gas alarm.
LCD
Shows an image of the entrance.
10KEY, (stop), # (reset) button
Used when inputting numbers for
dialing/function setting/entering
the code.
Safety Zone Lamp
Indicates the Safety Zone and
Burglar Alarm states.
Function Lamp
Indicates the function setting status.
Function Setting
Adjusting the Volume of the Bell
Press the button.
Press .
Adjusting the Brightness of the Screen
Press (low), (medium), or (high) to adjust the volume level.
1.
2.
3.
4.
1.
2.
3.
HS-6270 User's Manual / 7
Adjusting the Volume of the Phone
1.
2.
3.
4.
5.
6.
To end the function setting menu, press the button.
Press the button.
Press .
Press (dark), (medium), or (bright) to adjust the brightness level.
4.
5.
To go to another function setting menu, press .
To end the function setting menu, press the button.
Press the button.
Press .
Press (local), (door), (guard post), (common entrance), or (interphone).
The volume is set to medium level when released.
Press (small) ~ (large).
To end the function setting menu, press the button.
Function Setting
Setting the Safety Zone
※ When activating the security system, you can set the Safety Zone.
The zone setting is not affected, even though alarm function or away mode and/or
sleep mode is deactivated.
1.
2.
3.
4.
5.
8 / Honeywell Co., Ltd.
Press the button.
Press .
Press (Safety Zone 1), (Safety Zone 2), (Safety Zone 3), or (Safety Zone 4),
then the corresponding safety zone lamp blinks. Press it again to turn off.
Pressing the corresponding safety zone button causes the safety zone to be set
(not monitored: safety zone lamp blinks; monitored: safety zone lamp goes out).
To go to another function setting menu, press .
To end the function setting menu, press the button.
Autres manuels Honeywell Système de sécurité
Honeywell
Honeywell LYNX Touch Security System Manuel utilisateur
Honeywell
Honeywell SEF8MS Manuel utilisateur
Honeywell
Honeywell Ademco VISTA-20P Manuel utilisateur
Honeywell
Honeywell MK V Manuel utilisateur
Honeywell
Honeywell LYNX Touch L5210 Series Manuel utilisateur
Honeywell
Honeywell LYNX Touch Series Instructions de montage
Honeywell
Honeywell LYNX Touch L5210 Series Manuel d'installation
Honeywell
Honeywell Lynx Plus Series Mode d'emploi
Honeywell
Honeywell VISTA-128BPT Manuel utilisateur
Honeywell
Honeywell SUGPACK-UK Manuel utilisateur
Honeywell
Honeywell 032211.17 Manuel utilisateur
Honeywell
Honeywell GENT Manuel utilisateur
Honeywell
Honeywell 5800WAVE - Ademco Wireless Siren Instructions de montage
Honeywell
Honeywell VISTA-128BPTSIA Manuel utilisateur
Honeywell
Honeywell SEF8M Manuel utilisateur
Honeywell
Honeywell Galaxy Keyprox Caractéristiques techniques
Honeywell
Honeywell ESSER IQ8MCP Manuel utilisateur
Honeywell
Honeywell ESSER IQ8Alarm Manuel utilisateur
Honeywell
Honeywell VISTA-128FBPT Manuel utilisateur
Honeywell
Honeywell ADEMCO VISTA-10P Instructions de montage
Manuels Système de sécurité populaires d'autres marques
EDM
EDM Solution 6+6 Wireless-AE Manuel utilisateur
Highway Safety Group
Highway Safety Group EA401 Manuel utilisateur
Siren
Siren LED GSM Manuel utilisateur
Detection Systems
Detection Systems 7090i Instructions de montage
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuel utilisateur
Siemens
Siemens FDM273 Manuel utilisateur