Honeywell MAXPRO MPIP2000U Series Instructions de montage

MAXPRO Intrusion

Series

Integrated Security Systems

Installation and Setup Guide

800-23044 Rev.A draft_11

August 2020

Honeywell MAXPRO Intrusion MPIP2000U/3000U Series Installation and Setup Guide

800-23044 Rev. A draft_11 3

This document contains Honeywell proprietary information.

Information contained herein is to be used solely for the purpose submitted, and no

part of this document or its contents shall be reproduced, published, or disclosed to a

third party without the express permission of Honeywell International.

While this information is presented in good faith and believed to be accurate,

Honeywell disclaims the implied warranties of merchantability and fitness for a

purpose and makes no express warranties except as may be stated in its written

agreement with and for its customer.

In no event is Honeywell liable to anyone for any direct, special, or consequential

damages. The information and specifications in this document are subject to change

without notice.

Document Conventions

The following typographic conventions are used in this document:

Convention Description

Bold Used to denote: emphasis.

Used for names of menus, menu options, toolbar buttons…

Italic Used to denote references to other parts of this document or other

documents. Used for the result of an action.

The following icons are used in this document:

Icon Description



Note. This icon indicates information of special interest that will help the

reader make full use of the product, optimise performance, etc. Failure to

read the note will not result in physical harm to the reader, or damage to

equipment or data.



Caution! This icon indicates danger to equipment. The danger can be loss

of data, physical damage to the equipment, or permanent corruption of

configuration details.

Warning! This icon indicates danger of physical harm to the reader. Not

following instructions may lead to death or permanent injury.

Warning! This icon indicates danger of electric shock. This may lead to

death or permanent injury.

UL Indicates information for UL compliant installations.

4 800-23044 Rev. A draft_11

Installation and Setup Guide Honeywell MAXPRO Intrusion MPIP2000U/3000U Series

Honeywell MAXPRO Intrusion MPIP2000U/3000U Series Installation and Setup Guide

800-23044 Rev. A draft_11 5

Contents

1 About this Document 11

1.1 Scope 11

1.2 Audience 12

1.3 More Info 12

2 Introduction 13

2.1 The MAXPRO Intrusion Solution 13

2.2 System Features 13

2.2.1 Overview and Panel Model Comparison 13

2.2.2 Inputs and Output 15

2.2.3 IB2 Bus for Expansion Modules 16

2.2.4 V-Plex Bus for Individual I/O 16

2.2.5 Alarm Notification and Communication to the Alarm

Receiving Center 16

2.2.6 Configuration 17

2.2.7 Areas (Partitioning) 17

2.2.8 Access Control 17

2.2.9 Scheduling 17

2.2.10 Event Log 18

2.2.11 Indications 18

2.3 General Architecture 19

3 Installation 21

3.1 Installation and Setup – General Workflows 21

3.1.1 Initial Installation and Setup 21

3.1.2 Updating or Expanding an Existing Installation 23

3.1.3 Swapping Devices 24

3.2 Mounting the Cabinet 25

3.2.1 About the Cabinet 25

3.2.2 Cabinet Parts 27

3.2.3 Mounting the Cabinet 29

3.2.4 Mercantile Premises Listing Guidelines 31

3.3 Installing the Control Panel 32

3.3.1 Panel Parts 32

3.3.2 Mounting the Control Panel in the Cabinet 32

3.3.3 Options 33

3.4 Overview of Control Panel Connectors 33

3.5 Overview of Control Panel LEDs 36

3.6 Connecting the Cabinet Tamper Switches 37

3.7 Network Connection (Ethernet) 38

3.7.1 Connecting to the Network 38

3.7.2 Securing the Network 38

3.8 Wiring Inputs (Zones) 39

3.8.1 Overview 39

3.8.2 Zone Wiring Types 39

3.8.3 Using 2-Wire Smoke Detectors on Zone9 and10 43

3.9 Wiring Alarm Sounders 45

3.9.1 Overview 45

3.9.2 Installing Supervised External Sirens (2-Wire Sirens

BELL1/BELL2) 45

3.9.3 Installing a Self-Activating Bell (SAB) 47

3.10 Wiring Outputs 48

4 Installing the LTE Module (MPICLTEU, MPICLTEC) 49

4.1 About the 4G/LTE Module 49

4.2 Installation 50

4.2.1 Parts Overview 50

4.2.2 Installing the SIM Card 50

4.2.3 Installing the SMA Cables on the 4G/LTE Module 51

4.2.4 Installing the 4G/LTE Module in the Cabinet 52

4.2.5 Connecting to the MPI Control Panel 53

4.2.6 Installing the SMA Isolators on the MPI Cabinet 53

4.2.7 Connecting the Primary and Secondary Antennas 54

4.2.8 Configuration in MAXPRO Cloud 54

4.3 Disconnecting/Reconnecting 55

4.4 Receive Diversity Antenna System 55

4.5 Swapping the SIM Card 56

4.6 LED Indicators 56

4.7 RF Exposure 57

5 Installing IB2 Bus Devices 58

5.1 About IB2 Devices 58

5.2 Cable Specifications 58

5.3 MPI Keypads MPIKTSMF, MPIKTSPRX 59

5.3.1 About the MPI Keypads 59

5.3.2 Features 59

5.3.3 Operational Commands 60

5.3.4 Mounting and Wiring 60

5.3.5 Using the Optional Wall Mounting Plate 63

5.3.6 Programming 64

5.3.7 LED Indicators 64

5.3.8 Keypad Default Users and Authority Levels 65

5.3.9 Using the Keypad 66

5.4 MPI Door Control Module MPIDC1 69

5.4.1 About the MPI Door Control Module 69

5.4.2 Features 69

5.4.3 Inputs and Outputs 70

5.4.4 Mounting 70

5.4.5 Summary of Connections 72

5.4.6 Default Zone Configurations 75

5.4.7 Programming 75

6 800-23044 Rev. A draft_11

Installation and Setup Guide Honeywell MAXPRO Intrusion MPIP2000U/3000U Series

Honeywell MAXPRO Intrusion MPIP2000U/3000U Series Installation and Setup Guide

800-23044 Rev. A draft_11 7

5.4.8 LED Indicators 76

5.5 MPI Relay Module MPIEOP4 76

5.5.1 About the MPI Relay Module 76

5.5.2 Features 76

5.5.3 Mounting 76

5.5.4 Summary of Connections 78

5.5.5 Example Functions 79

5.5.6 Programming 80

5.5.7 LED Indicators 80

5.6 MPI Zone Expander MPIEIO84U 81

5.6.1 About the MPI Zone Expander 81

5.6.2 Features 81

5.6.3 Mounting 81

5.6.4 Summary of Connections 83

5.6.5 Wiring the Zones 84

5.6.6 Wiring the Trigger Outputs 84

5.6.7 Programming 85

5.6.8 LED Indicators 85

5.7 MPI Remote Power Supply MPIPSU35 86

5.7.1 About the MPI Remote Power Supply 86

5.7.2 Features 86

5.7.3 Monitoring/Reporting Options 87

5.7.4 Mounting 88

5.7.5 Summary of Connections 90

5.7.6 IB2 Bus Connection 93

5.7.7 Wiring Outputs (Triggers) 93

5.7.8 Programming 94

5.7.9 IB2 Bus LED Indicators 95

5.7.10 Maintenance 95

5.8 Cabinet Mounting with Control Panel or Remote Power Supply 96

6 Installing V-Plex Devices 101

6.1 About V-Plex Devices 101

6.2 V-Plex Connections 102

6.2.1 Supervision 102

6.2.2 V-Plex Loop Short 102

6.2.3 Limitations of V-Plex Cable Runs 103

6.2.4 Load 105

7 Powering the System 106

7.1 Wiring the AC Power Supply in the Cabinet 106

7.1.1 Using the Pre-installed Plug in the Cabinet 107

7.1.2 Using Conduit 108

7.2 Powering the Main Board 109

7.3 Installing Backup Batteries 110

7.3.1 Maximum Current Draw 111

7.3.2 Determining the Control Panel's Load 111

7.3.3 Determining the Size of the Standby Battery 116

7.3.4 Battery Installation 117

7.4 Connecting to MAXPRO Cloud 119

7.4.1 Workflow 119

7.4.2 Troubleshooting 121

7.4.3 Using Manual Mode on the Keypad 121

7.5 Shutting Down the Panel Securely 122

8 Configuration in MAXPRO Cloud 124

8.1 MAXPRO Cloud User Interface 124

8.2 Site Settings 125

8.2.1 Overview Tab 125

8.2.2 Settings Tab 125

8.3 Control Panel Settings 125

8.3.1 Overview Tab 125

8.3.2 About Installer Mode 126

8.3.3 Settings Tab 127

8.3.4 Communication Path Tab 127

8.3.5 Alarm Signalling Tab 128

8.3.6 AlarmNet Settings 128

8.3.7 Diagnostics Tab 129

8.4 Device Status 129

8.5 Control Panel Input/Output Settings 129

8.5.1 Zones Tab 129

8.5.2 Outputs Tab 129

8.5.3 Diagnostics Tab 130

8.6 Keypad Settings 130

8.7 Door Control Module Settings 130

8.7.1 Overview Tab 130

8.7.2 Settings Tab 130

8.7.3 I/O Tab 131

8.8 Relay Module Settings 131

8.8.1 Settings Tab 131

8.8.2 Outputs Tab 131

8.9 Remote Power Supply Settings 131

8.9.1 Settings Tab 131

8.9.2 Outputs Tab 132

8.9.3 Diagnostics Tab 132

8.10 Zone Expander Settings 132

8.10.1 Settings Tab 132

8.10.2 Zones Tab 132

8.10.3 Outputs Tab 133

8.11 V-Plex devices 133

8.12 Areas 133

8.12.1 Settings Tab 133

8.12.2 Sensors Tab 133

8.12.3 Outputs Tab 133

8 800-23044 Rev. A draft_11

Installation and Setup Guide Honeywell MAXPRO Intrusion MPIP2000U/3000U Series

Honeywell MAXPRO Intrusion MPIP2000U/3000U Series Installation and Setup Guide

800-23044 Rev. A draft_11 9

8.12.4 System Area 133

8.13 Scheduling and Holidays 134

8.14 Permission Groups 134

8.15 People 135

8.15.1 General 135

8.15.2 Intrusion Authority Levels 136

8.16 Controller Rules 138

8.17 Floor Plan 139

8.18 Clock Synchronisation 139

8.19 Updating the Firmware 139

9 Testing and Commissioning 142

9.1 Battery Test 142

9.2 Burglary Walk Test 142

9.3 Armed Burglary System Test 143

9.4 Smoke Detector Test 144

9.5 Siren Test 144

10 Important Information 145

10.1 To the Installer 145

10.2 Turning the System over to the User 145

10.3 Contacting Technical Support 146

11 Events 147

11.1 Event Notification Priority 147

11.2 Indications 147

11.3 Event Reporting per Area 148

11.4 MPI Events and Contact ID Codes 148

11.4.1 Events List 148

11.4.2 Zone Identifiers 153

11.5 MPI Events and SIA Codes 153

12 Specifications 160

12.1 MPI Control Panel 160

12.1.1 Specifications 160

12.1.2 Current Ratings 162

12.2 MPI Cabinet 162

12.3 MPI Remote Power Supply 163

12.3.1 Specifications 163

12.3.2 Current Ratings 165

12.4 MPI Keypad 165

12.5 MPI Door Control Module 167

12.6 MPI Relay Module 168

12.7 MPI Zone Expander 168

12.8 MPI LTE Module 169

12.9 Cable Type Requirements 171

13 Glossary 172

14 Limitations of the Alarm System 173

15 Compliance and Approvals 176

15.1 Listings and Certifications 176

15.1.1 US Listings 176

15.1.2 Canadian Listings 176

15.1.3 SIA Certification 176

15.2 Agency Statements 176

15.2.1 UL Installation Requirements 176

15.2.2 UL294 Access Control Systems 177

15.2.3 UL609 Local Mercantile Premises 177

15.2.4 UL365 Police Station Connected Burglar Alarm 177

15.2.5 UL611/UL1610 Central Station Burglary Alarm 177

15.2.6 UL985 Household Fire Warning System Units 178

15.2.7 UL1023 Household Burglar-Alarm System Units 178

15.2.8 CAN/ULC- S303, Local Burglar Alarm Units and

Systems 178

15.2.9 CAN/ULC-S304 Signal Receiving Centre and Premise

Burglar Alarm Control Units 178

15.2.10 CAN/ULC- S545 Residential Fire Warning System

Control Units 179

15.2.11 ANSI/SIA CP- 01 False Alarm Reduction

Requirements 179

15.2.12 California State Fire Marshal (CSFM) and UL

Residential Fire Battery Backup Requirements 180

15.2.13 Federal Communications Commission (FCC) Part15 180

16 Parts List 183

17 Support, Warranty, and Patent Information 186

10 800-23044 Rev. A draft_11

Installation and Setup Guide Honeywell MAXPRO Intrusion MPIP2000U/3000U Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Honeywell Système de sécurité

Honeywell

Honeywell VISTA 15P - Ademco 6 Zone Control Panel Mode d'emploi

Honeywell

Honeywell VISTA-21iP Manuel utilisateur

Honeywell

Honeywell GENT Nano panel-based Manuel de formation

Honeywell

Honeywell Galaxy 2-44+ Manuel utilisateur

Honeywell

Honeywell ADEMCO CE3 Code Encryptor 3 Instructions de montage

Honeywell

Honeywell Vista 21IP Manuel utilisateur

Honeywell

Honeywell RF Panic Button V2 Manuel utilisateur

Honeywell

Honeywell Lynx Plus Series Manuel utilisateur

Honeywell

Honeywell VISTA-128BPT Instructions de montage

Honeywell

Honeywell ADEMCO VISTA-40 Mode d'emploi

Honeywell

Honeywell 5816 WMWH Manuel utilisateur

Honeywell

Honeywell Friedland FGGA07 Series Manuel utilisateur

Honeywell

Honeywell LYNX Touch L7000 Series Manuel utilisateur

Honeywell

Honeywell PROSiXSIRENO Instructions de montage

Honeywell

Honeywell ADEMCO VISTA-12A Manuel utilisateur

Honeywell

Honeywell Lynx Plus Series Instructions de montage

Honeywell

Honeywell INTELLIGUARD 9000 Manuel utilisateur

Honeywell

Honeywell Friedland GlobalGuard Manuel utilisateur

Honeywell

Honeywell INTELLIGUARD 9000 Manuel

Honeywell

Honeywell VISTA-128FBP Manuel utilisateur

Honeywell

Honeywell LYNXR Instructions de montage

Honeywell

Honeywell ADEMCO VISTA SERIES Mode d'emploi

Honeywell

Honeywell LYNX Touch Security System Manuel utilisateur

Honeywell

Honeywell DIY Smart Home Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur