Honeywell Pro-Watch 7000 Manuel utilisateur

Install Guide

Pro-Watch 7000

Two-Reader Module

PW7K1R2

All product and brand names are the service marks, trademarks, registered trademarks, or registered service marks of their

respective owners. Printed in the United States of America. Honeywell reserves the right to change any information in this

document at any time without prior notice.

Pro-Watch® is a trademark of Honeywell, Inc.

Ordering Information

Please contact your local Honeywell representative or visit us on the web at www.honeywellintegrated.com for information

about ordering.

Feedback

Honeywell appreciates your comments about this manual. Please visit us on the web at www.honeywellintegrated.com to

post your comments.

Discover | Customer Portal

Self-Service Product Support and Learning Management System

https://honeywelldiscovertraining.com/login/discover/default.asp

YouTube | Honeywell Help and Support

https://www.youtube.com/channel/UCBEL6ouNV_LN5lEpYRujMTg/featured

PW-7000 Two-Reader Module Installation Guide, Document 800-25676V1 i

TABLE OF CONTENTS

Notices......................................................................................................................................... iii

Warnings and Cautions........................................................................................................ iii

Disclaimer....................................................................................................................................v

Limited Warranty ......................................................................................................................v

Confidentiality ......................................................................................................................... vi

Compliance ............................................................................................................................... vi

CE and WEEE Marking ......................................................................................................... vi

Unpacking Procedure .......................................................................................................... vii

Shipping Instructions .......................................................................................................... vii

Chapter 1 - Reader Module ............................................................................. 9

Description........................................................................................................................................ 9

Specifications......................................................................................................................... 10

Setup ................................................................................................................................................ 11

Setting Jumpers.................................................................................................................... 11

Setting DIP Switches........................................................................................................... 11

LED Operation.............................................................................................................................. 12

Power................................................................................................................................................ 13

Communications......................................................................................................................... 13

Wiring............................................................................................................................................... 14

Reader Wiring......................................................................................................................... 17

Input Wiring ............................................................................................................................ 17

Control Output Wiring ........................................................................................................ 18

Mounting Options....................................................................................................................... 19

Installing the Module................................................................................................................. 19

ii PW-7000 Two-Reader Module Installation Guide, Document 800-25676V1

Appendix A - Programming Sheet............................................................... 21

PW-7000 Two-Reader Module Installation Guide, Document 800-25676V1 iii

Notices

Warnings and Cautions

Wiring methods shall be in accordance with the National Electrical Code (ANSI/

NFPA70), Canadian Electrical Code, Part I (CSA C22.1) Safety Standard for Electri-

cal Installations, local codes, and the authorities having jurisdiction.

Warning:

Before connecting the device to the power supply, verify that the output voltage is within

specifications of the power supply.

Not Evaluated by UL for fire, life safety, or burglary applications.

Do not apply power to the system until after the installation has been completed. Personal

injury or death could occur, and the equipment could be damaged beyond repair, if this

precaution is not observed!

Warning: Fire Safety and Liability Notice

Never connect card readers to any critical entry, exit door, barrier, elevator, or gate without

providing an alternative exit in accordance with all fire and life safety codes pertinent to the

installation. These fire and safety codes vary from city to city and you must get approval from

local fire officials whenever using an electronic product to control a door or other barrier. Use of

egress buttons, for example, may be illegal in some cities. In most applications, single action

exit without prior knowledge of what to do is a life safety requirement. Always make certain that

any required approvals are obtained in writing. DO NOT ACCEPT VERBAL APPROVALS,

BECAUSE THEY ARE NOT VALID.

Honeywell never recommends using the PW-7000 or related products for use as a primary

warning or monitoring system. Primary warning or monitoring systems should always meet

local fire and safety code requirements. The installer must also test the system on a regular

basis by instructing the end user in appropriate daily testing procedures. Failure to test a

system regularly could make the installer liable for damages to the end user if a problem

occurs.

iv PW-7000 Two-Reader Module Installation Guide, Document 800-25676V1

Note: See the Remote Enclosure Installation manuals for PW5K2ENC1/PW5K2ENC2 or

PW5K1ENC3 for installation instructions.

Note: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his

own expense.

Note: This document and the data in it shall not be duplicated, used, or disclosed to others

for procurement or manufacture, except as authorized by and with the written

permission of, Honeywell, Inc. The information contained in this document or in the

product itself is considered the exclusive property and trade secrets of Honeywell,

Inc. Copyright laws of the United States protect all information in this document or in

the software product itself.

Note: Any use of this product is subject to the terms and acceptance of the Honeywell, Inc.

Software Agreement. Please request a copy from Honeywell, Inc., and review the

agreement carefully.

Warning:

EARTH GROUND all enclosures for proper installation.

Warning:

Use suppressors on all door strikes. Use S-4 suppressors for installation. Honeywell

recommends only DC strikes.

Caution:

IF ANY DAMAGE TO THE SHIPMENT IS NOTICED, A CLAIM MUST BE FILED WITH THE

COMMERCIAL CARRIER RESPONSIBLE.

Caution:

Electrostatic discharge can damage CMOS integrated circuits and modules.

To prevent damage, always follow these procedures:

Use static shield packaging and containers to transport all electronic components,

including completed reader assemblies.

Handle all ESD sensitive components at an approved static controlled workstation. These

workstations consist of a desk mat, a floor mat, and an ESD wrist strap. Workstations are

available from various vendors.

PW-7000 Two-Reader Module Installation Guide, Document 800-25676V1 v

Disclaimer

Product Liability; Mutual Indemnification

In the event that a Customer receives a claim that a Product or any component

thereof has caused personal injury or damage to property of others, Customer

shall immediately notify Honeywell in writing of all such claims. Honeywell shall

defend or settle such claims and shall indemnify and hold Customer harmless for

any costs or damages including reasonable attorneys' fees which Customer may

be required to pay as a result of the defective Product or the negligence of Honey-

well, its agents, or its employees.

Customer shall hold harmless and indemnify Honeywell from and against all

claims, demands, losses, and liability arising out of damage to property or injury to

persons occasioned by or in connection with the acts or omissions of Customer

and its agents and employees, and from and against all claims, demands, losses,

and liability for costs of fees, including reasonable attorneys' fees, in connection

therewith.

Limited Warranty

All Products sold or licensed by Honeywell include a warranty registration card

which must be completed and returned to Honeywell by or on behalf of the end

user in order for Honeywell to provide warranty service, repair, credit or exchange.

All warranty work shall be handled through Customer which shall notify Honeywell

and apply for a Return Merchandise Authorization (RMA) number prior to returning

any Product for service, repair, credit or exchange. NewWatch warrants that its

Products shall be free from defects in materials and workmanship for a period of

two years from date of shipment of the Product to Customer. The warranty on Ter-

minals, Printers, Communications Products and Upgrade kits is 90 days from date

of shipment.

Satisfaction of this warranty shall be limited to repair or replacement of Products

which are defective or defective under normal use. Honeywell’s warranty shall not

extend to any Product which, upon examination, is determined to be defective as a

result of misuse, improper storage, incorrect installation, operation or mainte-

nance, alteration, modification, accident or unusual deterioration of the Product

due to physical environments in excess of the limits set forth in Product manuals.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THIS PROVISION. THIS

WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS,

IMPLIED OR STATUTORY, INCLUDING IMPLIED WARRANTIES OF MERCHANT-

ABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. NO REPRESENTATION

OR WARRANTY OF THE DISTRIBUTOR SHALL EXTEND THE LIABILITY OR

RESPONSIBILITY OF THE MANUFACTURER BEYOND THE TERMS OF THIS PRO-

VISION. IN NO EVENT SHALL HONEYWELL BE LIABLE FOR ANY RE-PROCURE-

MENT COSTS, LOSS OF PROFITS, LOSS OF USE, INCIDENTAL, CONSEQUENTIAL

OR SPECIAL DAMAGES TO ANY PERSON RESULTING FROM THE USE OF NEW-

WATCH’S PRODUCTS.

vi PW-7000 Two-Reader Module Installation Guide, Document 800-25676V1

Confidentiality

All software, drawings, diagrams, specifications, catalogs, literature, manuals and

other materials furnished by Honeywell relating to the design, use and service of

the Products shall remain confidential and shall constitute proprietary rights of

Honeywell and Customer agrees to treat such information as confidential. Cus-

tomer shall acquire no rights in the design of the Products or the related materials

except to use such information solely for the purpose of and only during the time it

sells the Products.

Customer shall not copy the design of any of the Products or use or cause to be

used any Product design or related materials for its own benefit or for the benefit of

any other party. The covenants contained in this section shall remain effective

throughout the term of this Agreement and thereafter unless specifically waived by

Honeywell in writing.

Compliance

To obtain applicable EU compliance Declaration of Conformities for this product,

please refer to our website, https://www.security.honeywell.com/All-Categories/

access-control-systems/control-panels-hardware. For any additional information

regarding the compliance of this product to any EU-specific requirements, please

contact:

Honeywell Security & Communications

Honeywell Security - Quality Assurance Dept., Newhouse Industrial Estate Mother-

well

Lanarkshire ML1 5SB Scotland

United Kingdom

Tel: +44)0) 1698 738200

Email: UK64Sales@Honeywell.com

CE and WEEE Marking

Description of the used symbol.

CE -Standard -Logo. This product complies with

the harmonized Regulation of the EU

WEEE symbol.It indicates this product is to be

recycling and not been thrown in the dustbin

PW-7000 Two-Reader Module Installation Guide, Document 800-25676V1 vii

Unpacking Procedure

All containers should be opened and unpacked carefully in order to prevent dam-

age to the contents.

The following steps are used to unpack equipment in preparation for installation:

Step 1. Open the container and remove the unit(s) and all packing material.

Retain the container and all packing materials. They may be used again

for reshipment of the equipment, if needed.

Step 2. Inspect the contents for shortage. If items are missing items, contact the

order entry department at 800-323-4576.

Step 3. Visually check contents. If damage is discovered, perform the following:

If shipping caused damage to the unit, a claim must be filed with the commercial

carrier.

If any other defect is apparent, call for a return authorization.

Shipping Instructions

To ship equipment back to Honeywell, Inc.:

Step 1. Contact the customer service department at 800-323-4576 before

returning equipment. When you call please have available:

• A description of the problem or reason you are returning the equipment.

• Your original purchase order number, invoice number and if the unit is still

under warranty.

• A new purchase order number if the unit is not under warranty

Caution:

If any damage to the shipment is noticed before unpacking, a claim must be filed with the

commercial carrier.

viii PW-7000 Two-Reader Module Installation Guide, Document 800-25676V1

Step 2. From the customer service department, obtain the Return Authorization

Number (RMA).

Step 3. Show the RMA number on all packages shipped. Packages which are not

marked with an RMA number will be refused at the factory and returned

to you COD.

Step 4. Carefully pack the equipment for shipment. Use the original packing

material whenever possible.

This page is intentionally left blank

Autres manuels pour Pro-Watch 7000

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Honeywell Unité de contrôle

Honeywell

Honeywell Resideo ADEMCO 4101SN V-Plex Instructions de montage

Honeywell

Honeywell SILENT KNIGHT SK-FML Manuel utilisateur

Honeywell

Honeywell Ex-Or CDH8U5 Manuel d'installation et d'exploitation

Honeywell

Honeywell NOTIFIER LDM Series Manuel utilisateur

Honeywell

Honeywell S9240F1004 Manuel utilisateur

Honeywell

Honeywell VC Series Manuel utilisateur

Honeywell

Honeywell NOTIFIER FCM-1A Manuel utilisateur

Honeywell

Honeywell 7800 SERIES Manuel utilisateur

Honeywell

Honeywell SILENT KNIGHT Farenhyt Series Manuel utilisateur

Honeywell

Honeywell PEHA 450 FU-SP 2 Manuel utilisateur

Honeywell

Honeywell 7800 SERIES Manuel utilisateur

Honeywell

Honeywell PEHA PHC Manuel utilisateur

Honeywell

Honeywell VISTA-ICM Instructions de montage

Honeywell

Honeywell N-1000 Manuel de service

Honeywell

Honeywell C7110C1040 Manuel utilisateur

Honeywell

Honeywell DCCC6500 Manuel utilisateur

Honeywell

Honeywell LTE-L57A Manuel utilisateur

Honeywell

Honeywell D05FS-A Series Manuel utilisateur

Honeywell

Honeywell SV2 Series Manuel utilisateur

Honeywell

Honeywell EIM Guide d'installation

Honeywell

Honeywell FY 30 Manuel utilisateur

Honeywell

Honeywell EXCEL 5000 OPEN T7460A Manuel utilisateur

Honeywell

Honeywell Aquastat L4006 Manuel utilisateur

Honeywell

Honeywell EXCEL CARE 5000 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur