Honeywell IFP-2100 Caractéristiques techniques

Autres manuels pour IFP-2100

1

Autres manuels Honeywell Panneau de contrôle

Honeywell

Honeywell 6820 Manuel utilisateur

Honeywell

Honeywell Galaxy 3-48C Manuel utilisateur

Honeywell

Honeywell TotalZone TZ-4 Manuel d'utilisation

Honeywell

Honeywell OMNI 408 Instructions de montage

Honeywell

Honeywell Fire-Lite MS-5UD-3 Manuel utilisateur

Honeywell

Honeywell IFP-75 Manuel utilisateur

Honeywell

Honeywell Silent Knight IFP-2000 Module 3 Manuel utilisateur

Honeywell

Honeywell H-S81-HS Manuel utilisateur

Honeywell

Honeywell Galaxy Flex Manuel utilisateur

Honeywell

Honeywell Silent Knight 5860 Manuel technique

Honeywell

Honeywell DeltaNet FS90 Manuel utilisateur

Honeywell

Honeywell CM737 Instructions d'installation

Honeywell

Honeywell Fire-Lite Alarms ES-1000X Manuel utilisateur

Honeywell

Honeywell NOTIFIER RP-2002C Manuel utilisateur

Honeywell

Honeywell Lynx Touch L5100 Guide d'installation

Honeywell

Honeywell Gent Viglion EN54 Manuel d'installation et d'exploitation

Honeywell

Honeywell HPZC10 Series Manuel utilisateur

Honeywell

Honeywell Tuxedo Touch Wi-Fi Instructions de montage

Honeywell

Honeywell Galaxy Dimension series Guide de l'utilisateur

Honeywell

Honeywell PC8900A Manuel utilisateur

Honeywell

Honeywell Notifier ST.PL4+ Manuel utilisateur

Honeywell

Honeywell Gamewell Flex 402 Manuel utilisateur

Honeywell

Honeywell TrueZONE HZ432K/U Manuel utilisateur

Honeywell

Honeywell Domonial CMI 800++ Guide de l'utilisateur

Manuels Panneau de contrôle populaires d'autres marques

RDZ

RDZ PC-HRX Manuel utilisateur

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuel technique

Efka

Efka Variocontrol V810 Manuel utilisateur

Cebora

Cebora 208-10 Manuel utilisateur

AMX

AMX AutoPatch CP-15 Manuel utilisateur

Satel

Satel CA-6 KLED-S Manuel utilisateur

Evolution

Evolution IQ plus 800 Manuel utilisateur

Fagor

Fagor 8040 TCO CNC Manuel utilisateur

Trane

Trane ComfortLink II XL950 Control Manuel utilisateur

AKO

AKO PROCool AKO-17635-2 Manuel utilisateur

ABB

ABB 6136/30M-101 Manuel utilisateur

Telikou

Telikou BK-603 Belt Pack Manuel utilisateur

Mapei

Mapei Mapeheat Thermo Touch Manuel utilisateur

Bosch

Bosch D9412GV4 Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuel utilisateur

Sminn

Sminn BOX L VF1L EI Manuel utilisateur

Balboa

Balboa TP600 Manuel utilisateur

Nice

Nice HSCU1 Caractéristiques techniques

Model IFP-2100

Basic Operating Instructions

These instructions must be framed and displayed next to the IFP-2100 panel in accordance

with NFPA 72 fire code for Local Protected Fire Alarm Systems.

FS = Fire System

Operation Task to Perform

Silence Alarms

and Troubles

Press SILENCE then enter a code if prompted. Silence LED will light.

Reset Alarms

1.

Press

RESET

.

2.

Press 1 to Reset Fire System.

View all active

alarms, troubles,

and supervisory

signals

The highest priority event will display first. Press the Down arrow to view location and type of alarm or trouble.

View a Point’s

Status

1.

Press ENTER to access Main Menu.

2.

Press 2 to select Point Functions.

3.

Then press 2 to select Point Status.

4.

Select the module the device is located on by using the Up or Down button. Then pressENTER.

5.

Enter the point number.

Conduct a Fire

Drill

Hold the DRILL button and then enter a code if prompted. OR

1.

Enter the installer code. The panel will automatically go to the main menu.

2.

Press 1 to select System Tests.

3.

Enter code if prompted, then press 1 to select Fire Drill.

4.

Press ENTER to start the fire drill, and Press ENTER to end the fire drill.

NOT APPROVED BY VERMONT FOR FIRE DRILLS.

Set Time and

Date

1.

Enter the installer code. The panel will automatically go to the main menu.

2.

Press 4 to select Set Time & Date. Enter a code if prompted.

3.

Make changes to the fields on the screen as necessary.

4.

Press ENTER if you wish to keep thechanges.

5.

Press ENTER to set the entered time anddate.

Enable / Disable

a Point

1.

Enter the installer code. The panel will automatically go to the main menu.

2.

Press 2 to select Point Functions.

3.

Enter code if prompted, then press 1 to select Disable / Enable Point.

4.

Press 7 to select Disable/Enable Point.

5.

Select the module the point is located on by using the up or down arrow. Then press ENTER.

6.

Enter the point number then press ENTER.

7.

Press the right arrow to Disable/Enable Point.

To Gain /Request

ECS Control

1. Press the Button and follow the on-screen Instructions.

Note: When ECS Control LED is blinking, another LOC has ECS Control. ECS Control LED is on steady when the

LOC has ECS Control.

For Service call:

(800) 639-2521