Honeywell IFP-300 Caractéristiques techniques

Model IFP-300 Basic Operating Instructions

These Instructions must be framed and displayed next to the IFP-300 panel in accordance with NFPA 7 fire code for

Local Protected Fire Alarm Systems. Test the system in accordance to NFPA 7 .

Operation

Task to Per

form

Silence Alarms and

Troubles

Press

SILENCE

then enter a code if prompted. Silence LED will light.

Reset Alarms

Press

RESET

then enter a code if prompted.

View Alarms,

Supervisory, and

Troubles

For each type of condition press the Up or Down button associated for Alarms,

Supervisory, or Troubles.

View status of Point

Press

ENTER

to access Main

Menu.

Press to select Point Functions.

Then press to select Point Status.

Select the module the device is located on by using the Up or Down button. Then

press ENTER.

Enter the point number.

Conduct a Fire Drill

Call service company

May be disabled

May not be allowed by

AHJ in your area.

Press

ENTER

to access Main

Menu.

Then Press 1 to select System Tests.

Press 1 to select Fire Drill.

Press ENTER to start the fire drill.

Press ENTER to end the fire drill.

TROUBLE

FIRE: ALARM SUPERVISORY

CO: ALARM SUPERVISORY

SYSTEM: TROUBLE

Check Detector

Sensitivity

Press

ENTER

to access Main

Menu.

Press for Point Status.

From the list that displays, select the SLC module where the point you want to view is

located.

The fourth line of the display shows the sensitivity status. “NORMAL” means the

detector is in compliance with NFPA 7 .

“CAL MAINT” means the detector is in compliance with NFPA 7 but maintenance should

be performed soon.

“CAL TRBLE” means the detector is not in compliance with NFPA 7 .

Set Time and Date

Press

ENTER

to access Main

Menu.

Press 4 to select Set Time & Date. Enter a code if prompted

Make changes in the fields on the screen as necessary.

When the time and date are correct, press ENTER.

Enable / Disable a Point

Press

ENTER

to access Main

Menu.

Press to select Point Functions.

Press 1 for Disable / Enable Pt

Press 7 for Disable / Enable Pt.

Use the Up or Down button to move through the list. Then press ENTER to select the

module where the point you want to disable/enable is located

Enter the point or circuit number that you want to disable/enable.

Press the right arrow key to toggle between NORMAL (enable) or DISABLE.

View Event History

From the Program Menu.

Press 3 to select Event History.

Press the Up or Downbutton to view events in the history buffer.

For Service Call:

(800) 639- 5 1

Autres manuels Honeywell Panneau de contrôle

Honeywell

Honeywell Gent Viglion EN54 Manuel d'installation et d'exploitation

Honeywell

Honeywell PC8900A Manuel utilisateur

Honeywell

Honeywell Notifier NFS-320 Manuel utilisateur

Honeywell

Honeywell Fire-Lite Alarms ES-200X Manuel utilisateur

Honeywell

Honeywell CM737 Instructions d'installation

Honeywell

Honeywell ControLinks YP7999A1000 Manuel utilisateur

Honeywell

Honeywell NOTIFIER ID62 Feuille d'instructions

Honeywell

Honeywell nfs2-3030 Manuel utilisateur

Honeywell

Honeywell MRP-2002 Manuel utilisateur

Honeywell

Honeywell Notifier RP-2001 Manuel utilisateur

Honeywell

Honeywell AQ250 Series Manuel utilisateur

Honeywell

Honeywell IQ8Control C Manuel utilisateur

Honeywell

Honeywell Galaxy 3-48C Manuel utilisateur

Honeywell

Honeywell MM3-MASTERTROL MM-3 Manuel technique

Honeywell

Honeywell MS-9200UDLSE Manuel utilisateur

Honeywell

Honeywell Securit 800L Manuel utilisateur

Honeywell

Honeywell NOTIFIER INSPIRE E10 Manuel utilisateur

Honeywell

Honeywell Galaxy Flex Guide de l'utilisateur

Honeywell

Honeywell Fire-Lite Alarms MS-9200 Manuel utilisateur

Honeywell

Honeywell NOTIFIER SLC Manuel utilisateur

Honeywell

Honeywell 6820 Manuel utilisateur

Honeywell

Honeywell nfs2-3030 Manuel du propriétaire

Honeywell

Honeywell Domonial CMI Series Guide de l'utilisateur

Honeywell

Honeywell Fire-Lite Alarms ES-50X Manuel utilisateur

Manuels Panneau de contrôle populaires d'autres marques

RDZ

RDZ PC-HRX Manuel utilisateur

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuel technique

Efka

Efka Variocontrol V810 Manuel utilisateur

Cebora

Cebora 208-10 Manuel utilisateur

AMX

AMX AutoPatch CP-15 Manuel utilisateur

Satel

Satel CA-6 KLED-S Manuel utilisateur

Evolution

Evolution IQ plus 800 Manuel utilisateur

Fagor

Fagor 8040 TCO CNC Manuel utilisateur

Trane

Trane ComfortLink II XL950 Control Manuel utilisateur

AKO

AKO PROCool AKO-17635-2 Manuel utilisateur

ABB

ABB 6136/30M-101 Manuel utilisateur

Telikou

Telikou BK-603 Belt Pack Manuel utilisateur

Mapei

Mapei Mapeheat Thermo Touch Manuel utilisateur

Bosch

Bosch D9412GV4 Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuel utilisateur

Sminn

Sminn BOX L VF1L EI Manuel utilisateur

Balboa

Balboa TP600 Manuel utilisateur

Nice

Nice HSCU1 Caractéristiques techniques