Honeywell NOTIFIER INSPIRE E10 Manuel utilisateur
INSPIRE E10/E15
Fire Alarm Control panels
Operating Instructions
2
CONTENTS
Conventions 3
Abbreviations 3
Introduction 4
Display and controls 4
Touch screen display 4
Panel Buzzer 4
LED indicators and PUSH Button Controls 5
Touch Screen buttons, icons and symbols 6
Normal SAFE Condition 11
PIN entry to Controls 14
Fire Condition 15
What do I Need to do? 15
Evacuate Button a future function. 16
Viewing Multiple Fire Events 16
Fire Zone View 18
Output view 18
Enable / Disable Zones 19
Enable / Disable Devices on a Loop 20
Enable / Disable Devices by Detection Zone 21
Fault Warnings condition 22
Disablement condition 23
Test System 24
Viewing the Event Logs 26
Time and date settings 28
Display settings 30
Language And Country Settings 31
SCREEN and Day/Night and
Zonal Indicator Settings 32
System Information 33
Log In and Out 34
3
INSPIRE E10/E15 Control Panels - Operating instructions
CONVENTIONS
Where appropriate, in this manual there are advisory
notes, warnings and cautions to remind you to consider
safety at all times.
This symbol precedes a note that
highlight important information that is
normally hidden in the main text.
This symbol precedes information
that warns of danger that may result
in serious injury or death, also used
as a caution to prevent damage to
the equipment.
This symbol precedes information
about compliance with standard(s).
VdS Not VdS approved.
ABBREVIATIONS
CIE Control and Indicating Equipment
CPU Central Processing Unit
E10 Smaller size Notifier panel
E15 Larger size Notifier panel
FARE Fire Alarm Routing Equipment
FRE Fault Routing Equipment
FPE Fire Protection Equipment
HMI HumanMachine Interface
LED Light emitting diode (light)
MCP Manual call point
4
INTRODUCTION
The purpose of this manual is to explain how to use the
INSPIRE E10/E15 Fire Alarm Control panel’s - Control
and Indicating Equipment CIE (hereafter also referred
to as the ‘panel’ or ‘control panel’). It documents how
to use the built-in touch screen and push button
controls to access various functions and/or carry out
regular mandatory procedures required by the local
fire industry regulations. Helpful descriptions and tips
are also provided to assist the user in understanding
the status information provided by the Control Panel’s
touch screen and light indicators. The INSPIRE
E10/E15 Control Panels are designed to meet the
requirements of EN 542 and EN 544.
DISPLAY AND CONTROLS
The control panel's touch screen display and LED
indications allow the user to review the system status
and with appropriate user PIN access perform tasks
in accordance with the requirements of the local fire
regulations.
TOUCH SCREEN DISPLAY
The panel’s user interface is a large 10” colour touch
screen display (1280 × 800 pixels) for primary system
status, indication and control.
PANEL BUZZER
This internal panel buzzer provides an audible alert to
the authorised user to take immediate action whenever
the system detects any condition, such as a fire or fault
event.
Depending on the type of event, the buzzer activates a
continuous sound.
The SILENCE BUZZER control button is used to silence
(mute) the internal buzzer after it starts sounding
following a Fire/Fault event. This control is available at
all access levels without a need for PIN code.
5
INSPIRE E10/E15 Control Panels - Operating instructions
LED INDICATORS AND PUSH BUTTON CONTROLS
There are 7 status LED indicators provided on the panel fascia and there are 3 push buttons for event conditions.
Condition /
Control
LED
Colour
Description FIRE
FAULTFAULT
SYSTEM FAULT
DISABLED
DELAY ACTIVE
POWER
SILENCE/RESOUND
SILENCE BUZZER
RESET PANEL
TEST
FIRE Red A fire condition has been detected.
FAULT Yellow There is a fault in the system.
SYSTEM FAULT Yellow The system software or parts of it has failed
and/or the site specific data is corrupt..
DISABLED Yellow One or more device / zone are disabled.
TEST Yellow A system test has been entered.
DELAY ACTIVE Yellow One or more sounder / output delay is
configured in the Cause & Effect matrix.
POWER Green The system is switched On and the power is
supplied via the mains voltage.
The essential controls are push buttons and touch screen buttons, when lit they are
active for selection by the authorised users having PIN code access to the controls
The buttons are made active during event conditions, such as after fire detection or
when a fault has occurred in the system.
SILENCE/
RESOUND
White Silence or Resound the alarms sounders and
outputs in the system.
SILENCE BUZZER White Silence the panel buzzer.
RESET PANEL White Reset the panel after Fire condition.
6
TOUCH SCREEN BUTTONS, ICONS AND SYMBOLS
Essentil nd Emergenc Controls Description
or
Reset Panel
Pressing the ‘Reset Panel’ touch screen button or the
panels ‘Reset Panel’ push button it will reset the panel
to return it to normal condition after an event.
or
Silence Alarms
Pressing the ‘Silence Alarms’ touch screen button or
the panels ‘Silence/Resound’ push button will silence
all Alarm sounders.
or
Resound Alarms
Pressing the ‘Resound Alarms’ touch screen button
or the panels ‘Silence/Resound’ push button it will
activate previously silenced Alarm sounders.
or
Silence Buzzer
Pressing the ‘Silence Buzzer’ touch screen button or
the panels ‘Silence Buzzer’ push button it will silence
the active panel buzzer.
VdS
This touch screen 'Evacuate' button is not
VdS approved. Normally hidden this button
is configured to appear on the panel to meet
site needs where required, such as in the UK.
Pressing the touch screen 'Evacuate’ button it will start
all the Alarm Sounders in the system.
Pressing the 'Silence Alarms' button it will silence all
the Alarm Sounders in the system.
7
INSPIRE E10/E15 Control Panels - Operating instructions
Event Smbols Description
This indication shows there are a few active Fire events. In this example the number
signifies there are 4 active Zone Fires. By selecting this icon you can view active Zones
in fire.
This indication shows there are active Fault events. In this example the number
signifies there are 12 active Faults. By selecting this icon you can view active Faults.
This symbol show there are active Disablement events. In this example the number
signifies there are 51 active Disablements. By selecting this icon you can view active
Disablements.
This symbol shows there are currently no active Zone in Test in the system.
When there are Zones in Test then a number is displayed. In this example there are
no zones in test. By selecting this icon and if there were active Zones in Test then you
could view those zones in test mode.
Alarm Devices
status
Description
This ‘Activated’ indication is given when Alarm Devices in the system are activated.
This ‘Fault’ indication is given when Alarm Devices in the system are faulty.
This ‘Disabled’ indication is given when Alarm devices in the system are disabled.
This is a delayed status indication that appears with delayed operation of Alarm Devices.
This 'Normal' indication is given here during non fire condition or after alarms are
silenced and system is reset for normal operation.
8
Fire Brigade
status
Description
This 'FD Called' indication is given as a feedback that the Fire Brigade action was
successfully deployed.
The ‘Activated' indication is given when the Fire Brigade link is activated
automatically.
This 'Fault' indication is given when the Fire Brigade link or the Routing Equipment is
faulty.
This ‘Disabled’ indication is given when Fire Brigade link is disabled.
This is a delayed status indication which appears with delayed operation of Fire
Brigade link.
Fire Protection
equipment status
Description
This ‘Activated' indication is given when the Fire protection equipment activation has
happened.
This 'Actuated' indication is given as a feedback that the Fire Protection activation
action was successfully deployed.
This 'Fault' indication is given when Fire protection equipment or the transmission
path is faulty.
This 'Disabled' indication is given when Fire protection equipment is disabled.
This is a delayed status indication which appears with delayed operation of Fire
Protection equipment.
9
INSPIRE E10/E15 Control Panels - Operating instructions
Fault Routing
equipment status Description
This 'Activated' indication is given when Fault Routing equipment has activated.
This 'Fault' indication is given when Fault Routing equipment or the transmission
path is faulty.
This 'Disabled' indication is given when Fault Routing equipment is disabled.
This is a delayed status indication which appears with delayed operation of Fire
Routing equipment.
Event Smbols Description
This is a fire symbol that accompanies active and historic fire events.
This is a fault symbol that accompanies active and historic fault events.
This is a disablement symbol that accompanies active and historic disablement.
events.
This is a test symbol that accompanies active and historic test events.
10
Selections Description
Selecting this icon will open various settings or view options for selection.
Selecting this button expands information normally hidden.
Selecting this button compresses and hides the displayed information.
Selecting this button provides more information on the subject.
Selecting this button takes you to the previous screen.
Selecting this button exits the menu.
These symbols signify low and high brightness and is used with slider for setting
brightness.
Selecting this icon will return the display to a home page, which may be a default SAFE
(Normal) page or an event page such as Fire, Fault, Disablement or Test condition.
or
or
By clicking on a box or radio button it will toggle between selected and deselected. This
is used to filter events.
Selecting this button opens up a event filter page to allow selection options for viewing.
Autres manuels pour NOTIFIER INSPIRE E10
3
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Honeywell Panneau de contrôle
Honeywell
Honeywell TrueZONE HZ432K/U Manuel utilisateur
Honeywell
Honeywell 013080 Manuel d'instructions
Honeywell
Honeywell Silent Knight 5860 Manuel
Honeywell
Honeywell THOR VM1 Manuel utilisateur
Honeywell
Honeywell Fire-Lite Alarms ES-200X Manuel utilisateur
Honeywell
Honeywell MS-10UD Series Manuel utilisateur
Honeywell
Honeywell IFP-2100 Caractéristiques techniques
Honeywell
Honeywell HPZC10 Series Manuel utilisateur
Honeywell
Honeywell Lynx Touch L5100 Guide d'installation
Honeywell
Honeywell Notifier NFS-320 Manuel utilisateur
Honeywell
Honeywell Notifier ID50 Feuille d'instructions
Honeywell
Honeywell 6820 Manuel utilisateur
Honeywell
Honeywell Fire-Lite Alarms ACC-25/50 Manuel utilisateur
Honeywell
Honeywell Galaxy Flex Guide de l'utilisateur
Honeywell
Honeywell MINI-ZONE 69-1361 Guide de démarrage rapide
Honeywell
Honeywell Notifier ID3000 Series Mode d’emploi
Honeywell
Honeywell RS-232 Manuel utilisateur
Honeywell
Honeywell Domonial CMI Series Guide de l'utilisateur
Honeywell
Honeywell TotalZone TZ-4 Manuel d'utilisation
Honeywell
Honeywell MM3-MASTERTROL MM-3 Manuel technique
